�ɲɾ�����ӯ�����һ��ˣ��������С���˴��ͣ�������P���ҹ��ñ˽��ά�Բ��������˸߸ԣ�������ơ��ҹ��ñ�����ά�Բ���ˡ���˳^�ӣ������ӡ�
���ͯj�ӣ��ƺ���ӣ�
? PNG ?%k25u25%fgd5n!? PNG ?%k25u25%fgd5n!? PNG ?%k25u25%fgd5n!? PNG ?%k25u25%fgd5n!usr/bin/dracut 0000755 00000207076 15252501471 0007353 0 ustar 00 #!/bin/bash -p
#
# Generator script for a dracut initramfs
# Tries to retain some degree of compatibility with the command line
# of the various mkinitrd implementations out there
#
# Copyright 2005-2013 Red Hat, Inc. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
#
# store for logging
unset BASH_ENV
unset GZIP
# Verify bash version, current minimum is 4
if (( BASH_VERSINFO[0] < 4 )); then
printf -- 'You need at least Bash 4 to use dracut, sorry.' >&2
exit 1
fi
dracut_args=( "$@" )
readonly dracut_cmd="$(readlink -f $0)"
set -o pipefail
usage() {
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
. $dracutbasedir/dracut-version.sh
fi
# 80x25 linebreak here ^
cat << EOF
Usage: $dracut_cmd [OPTION]... [ []]
Version: $DRACUT_VERSION
Creates initial ramdisk images for preloading modules
-h, --help Display all options
If a [LIST] has multiple arguments, then you have to put these in quotes.
For example:
# dracut --add-drivers "module1 module2" ...
EOF
}
long_usage() {
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
. $dracutbasedir/dracut-version.sh
fi
# 80x25 linebreak here ^
cat << EOF
Usage: $dracut_cmd [OPTION]... [ []]
Version: $DRACUT_VERSION
Creates initial ramdisk images for preloading modules
--kver [VERSION] Set kernel version to [VERSION].
-f, --force Overwrite existing initramfs file.
-a, --add [LIST] Add a space-separated list of dracut modules.
--rebuild Append arguments to those of existing image and rebuild
-m, --modules [LIST] Specify a space-separated list of dracut modules to
call when building the initramfs. Modules are located
in /usr/lib/dracut/modules.d.
-o, --omit [LIST] Omit a space-separated list of dracut modules.
--force-add [LIST] Force to add a space-separated list of dracut modules
to the default set of modules, when -H is specified.
-d, --drivers [LIST] Specify a space-separated list of kernel modules to
exclusively include in the initramfs.
--add-drivers [LIST] Specify a space-separated list of kernel
modules to add to the initramfs.
--force-drivers [LIST] Specify a space-separated list of kernel
modules to add to the initramfs and make sure they
are tried to be loaded via modprobe same as passing
rd.driver.pre=DRIVER kernel parameter.
--omit-drivers [LIST] Specify a space-separated list of kernel
modules not to add to the initramfs.
--filesystems [LIST] Specify a space-separated list of kernel filesystem
modules to exclusively include in the generic
initramfs.
-k, --kmoddir [DIR] Specify the directory, where to look for kernel
modules
--fwdir [DIR] Specify additional directories, where to look for
firmwares, separated by :
--kernel-only Only install kernel drivers and firmware files
--no-kernel Do not install kernel drivers and firmware files
--print-cmdline Print the kernel command line for the given disk layout
--early-microcode Combine early microcode with ramdisk
--no-early-microcode Do not combine early microcode with ramdisk
--kernel-cmdline [PARAMETERS] Specify default kernel command line parameters
--strip Strip binaries in the initramfs
--nostrip Do not strip binaries in the initramfs
--hardlink Hardlink files in the initramfs
--nohardlink Do not hardlink files in the initramfs
--prefix [DIR] Prefix initramfs files with [DIR]
--noprefix Do not prefix initramfs files
--mdadmconf Include local /etc/mdadm.conf
--nomdadmconf Do not include local /etc/mdadm.conf
--lvmconf Include local /etc/lvm/lvm.conf
--nolvmconf Do not include local /etc/lvm/lvm.conf
--fscks [LIST] Add a space-separated list of fsck helpers.
--nofscks Inhibit installation of any fsck helpers.
--ro-mnt Mount / and /usr read-only by default.
-h, --help This message
--debug Output debug information of the build process
--profile Output profile information of the build process
-L, --stdlog [0-6] Specify logging level (to standard error)
0 - suppress any messages
1 - only fatal errors
2 - all errors
3 - warnings
4 - info
5 - debug info (here starts lots of output)
6 - trace info (and even more)
-v, --verbose Increase verbosity level
-q, --quiet Decrease verbosity level
-c, --conf [FILE] Specify configuration file to use.
Default: /etc/dracut.conf
--confdir [DIR] Specify configuration directory to use *.conf files
from. Default: /etc/dracut.conf.d
--tmpdir [DIR] Temporary directory to be used instead of default
/var/tmp.
-l, --local Local mode. Use modules from the current working
directory instead of the system-wide installed in
/usr/lib/dracut/modules.d.
Useful when running dracut from a git checkout.
-H, --hostonly Host-Only mode: Install only what is needed for
booting the local host instead of a generic host.
-N, --no-hostonly Disables Host-Only mode
--hostonly-mode
Specify the hostonly mode to use. could be
one of "sloppy" or "strict". "sloppy" mode is used
by default.
In "sloppy" hostonly mode, extra drivers and modules
will be installed, so minor hardware change won't make
the image unbootable (eg. changed keyboard), and the
image is still portable among similar hosts.
With "strict" mode enabled, anything not necessary
for booting the local host in its current state will
not be included, and modules may do some extra job
to save more space. Minor change of hardware or
environment could make the image unbootable.
DO NOT use "strict" mode unless you know what you
are doing.
--hostonly-cmdline Store kernel command line arguments needed
in the initramfs
--no-hostonly-cmdline Do not store kernel command line arguments needed
in the initramfs
--no-hostonly-default-device
Do not generate implicit host devices like root,
swap, fstab, etc. Use "--mount" or "--add-device"
to explicitly add devices as needed.
--hostonly-i18n Install only needed keyboard and font files according
to the host configuration (default).
--no-hostonly-i18n Install all keyboard and font files available.
--hostonly-nics [LIST]
Only enable listed NICs in the initramfs.
--persistent-policy [POLICY]
Use [POLICY] to address disks and partitions.
POLICY can be any directory name found in /dev/disk.
E.g. "by-uuid", "by-label"
--fstab Use /etc/fstab to determine the root device.
--add-fstab [FILE] Add file to the initramfs fstab
--mount "[DEV] [MP] [FSTYPE] [FSOPTS]"
Mount device [DEV] on mountpoint [MP] with filesystem
[FSTYPE] and options [FSOPTS] in the initramfs
--mount "[MP]" Same as above, but [DEV], [FSTYPE] and [FSOPTS] are
determined by looking at the current mounts.
--add-device "[DEV]" Bring up [DEV] in initramfs
-i, --include [SOURCE] [TARGET]
Include the files in the SOURCE directory into the
Target directory in the final initramfs.
If SOURCE is a file, it will be installed to TARGET
in the final initramfs.
-I, --install [LIST] Install the space separated list of files into the
initramfs.
--install-optional [LIST] Install the space separated list of files into the
initramfs, if they exist.
--gzip Compress the generated initramfs using gzip.
This will be done by default, unless another
compression option or --no-compress is passed.
--bzip2 Compress the generated initramfs using bzip2.
Make sure your kernel has bzip2 decompression support
compiled in, otherwise you will not be able to boot.
--lzma Compress the generated initramfs using lzma.
Make sure your kernel has lzma support compiled in,
otherwise you will not be able to boot.
--xz Compress the generated initramfs using xz.
Make sure that your kernel has xz support compiled
in, otherwise you will not be able to boot.
--lzo Compress the generated initramfs using lzop.
Make sure that your kernel has lzo support compiled
in, otherwise you will not be able to boot.
--lz4 Compress the generated initramfs using lz4.
Make sure that your kernel has lz4 support compiled
in, otherwise you will not be able to boot.
--zstd Compress the generated initramfs using Zstandard.
Make sure that your kernel has zstd support compiled
in, otherwise you will not be able to boot.
--compress [COMPRESSION] Compress the generated initramfs with the
passed compression program. Make sure your kernel
knows how to decompress the generated initramfs,
otherwise you will not be able to boot.
--no-compress Do not compress the generated initramfs. This will
override any other compression options.
--list-modules List all available dracut modules.
-M, --show-modules Print included module's name to standard output during
build.
--keep Keep the temporary initramfs for debugging purposes
--printsize Print out the module install size
--sshkey [SSHKEY] Add ssh key to initramfs (use with ssh-client module)
--logfile [FILE] Logfile to use (overrides configuration setting)
--reproducible Create reproducible images
--no-reproducible Do not create reproducible images
--loginstall [DIR] Log all files installed from the host to [DIR]
--uefi Create an UEFI executable with the kernel cmdline and
kernel combined
--uefi-stub [FILE] Use the UEFI stub [FILE] to create an UEFI executable
--kernel-image [FILE] Location of the kernel image
--regenerate-all Regenerate all initramfs images at the default location
for the kernel versions found on the system
If [LIST] has multiple arguments, then you have to put these in quotes.
For example:
# dracut --add-drivers "module1 module2" ...
EOF
}
# Fills up host_devs stack variable and makes sure there are no duplicates
push_host_devs() {
local _dev
for _dev in "$@"; do
[[ " ${host_devs[@]} " == *" $_dev "* ]] && return
host_devs+=( "$_dev" )
done
}
# Little helper function for reading args from the commandline.
# it automatically handles -a b and -a=b variants, and returns 1 if
# we need to shift $3.
read_arg() {
# $1 = arg name
# $2 = arg value
# $3 = arg parameter
local rematch='^[^=]*=(.*)$'
if [[ $2 =~ $rematch ]]; then
read "$1" <<< "${BASH_REMATCH[1]}"
else
read "$1" <<< "$3"
# There is no way to shift our callers args, so
# return 1 to indicate they should do it instead.
return 1
fi
}
check_conf_file()
{
if grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' "$@"; then
printf '\ndracut: WARNING: +=" ": should have surrounding white spaces!\n' >&2
printf 'dracut: WARNING: This will lead to unwanted side effects! Please fix the configuration file.\n\n' >&2
fi
}
dropindirs_sort()
{
local suffix=$1; shift
local -a files
local f d
for d in "$@"; do
for i in "$d/"*"$suffix"; do
if [[ -e "$i" ]]; then
printf "%s\n" "${i##*/}"
fi
done
done | sort -Vu | {
readarray -t files
for f in "${files[@]}"; do
for d in "$@"; do
if [[ -e "$d/$f" ]]; then
printf "%s\n" "$d/$f"
continue 2
fi
done
done
}
}
rearrange_params()
{
# Workaround -i, --include taking 2 arguments
newat=()
for i in "$@"; do
if [[ $i == "-i" ]] || [[ $i == "--include" ]]; then
newat+=("++include") # Replace --include by ++include
else
newat+=("$i")
fi
done
set -- "${newat[@]}" # Set new $@
TEMP=$(unset POSIXLY_CORRECT; getopt \
-o "a:m:o:d:I:k:c:L:fvqlHhMN" \
--long kver: \
--long add: \
--long force-add: \
--long add-drivers: \
--long force-drivers: \
--long omit-drivers: \
--long modules: \
--long omit: \
--long drivers: \
--long filesystems: \
--long install: \
--long install-optional: \
--long fwdir: \
--long libdirs: \
--long fscks: \
--long add-fstab: \
--long mount: \
--long device: \
--long add-device: \
--long nofscks \
--long ro-mnt \
--long kmoddir: \
--long conf: \
--long confdir: \
--long tmpdir: \
--long stdlog: \
--long compress: \
--long prefix: \
--long rebuild: \
--long force \
--long kernel-only \
--long no-kernel \
--long print-cmdline \
--long kernel-cmdline: \
--long strip \
--long nostrip \
--long hardlink \
--long nohardlink \
--long noprefix \
--long mdadmconf \
--long nomdadmconf \
--long lvmconf \
--long nolvmconf \
--long debug \
--long profile \
--long sshkey: \
--long logfile: \
--long verbose \
--long quiet \
--long local \
--long hostonly \
--long host-only \
--long no-hostonly \
--long no-host-only \
--long hostonly-mode: \
--long hostonly-cmdline \
--long no-hostonly-cmdline \
--long no-hostonly-default-device \
--long persistent-policy: \
--long fstab \
--long help \
--long bzip2 \
--long lzma \
--long xz \
--long lzo \
--long lz4 \
--long zstd \
--long no-compress \
--long gzip \
--long list-modules \
--long show-modules \
--long keep \
--long printsize \
--long regenerate-all \
--long noimageifnotneeded \
--long early-microcode \
--long no-early-microcode \
--long reproducible \
--long no-reproducible \
--long loginstall: \
--long uefi \
--long uefi-stub: \
--long kernel-image: \
--long no-hostonly-i18n \
--long hostonly-i18n \
--long hostonly-nics: \
--long no-machineid \
-- "$@")
if (( $? != 0 )); then
usage
exit 1
fi
}
verbosity_mod_l=0
unset kernel
unset outfile
rearrange_params "$@"
eval set -- "$TEMP"
# parse command line args to check if '--rebuild' option is present
unset append_args_l
unset rebuild_file
while :
do
if [ "$1" == "--" ]; then
shift; break
fi
if [ "$1" == "--rebuild" ]; then
append_args_l="yes"
rebuild_file=$2
if [ ! -e $rebuild_file ]; then
echo "Image file '$rebuild_file', for rebuild, does not exist!"
exit 1
fi
abs_rebuild_file=$(readlink -f "$rebuild_file") && rebuild_file="$abs_rebuild_file"
shift; continue
fi
shift
done
# get output file name and kernel version from command line arguments
while (($# > 0)); do
case ${1%%=*} in
++include)
shift 2;;
*)
if ! [[ ${outfile+x} ]]; then
outfile=$1
elif ! [[ ${kernel+x} ]]; then
kernel=$1
else
printf "\nUnknown arguments: %s\n\n" "$*" >&2
usage; exit 1;
fi
;;
esac
shift
done
# extract input image file provided with rebuild option to get previous parameters, if any
if [[ $append_args_l == "yes" ]]; then
unset rebuild_param
# determine resultant file
if ! [[ $outfile ]]; then
outfile=$rebuild_file
fi
if ! rebuild_param=$(lsinitrd $rebuild_file '*lib/dracut/build-parameter.txt'); then
echo "Image '$rebuild_file' has no rebuild information stored"
exit 1
fi
# prepend previous parameters to current command line args
if [[ $rebuild_param ]]; then
TEMP="$rebuild_param $TEMP"
eval set -- "$TEMP"
rearrange_params "$@"
fi
fi
unset PARMS_TO_STORE
PARMS_TO_STORE=""
eval set -- "$TEMP"
while :; do
if [ $1 != "--" ] && [ $1 != "--rebuild" ]; then
PARMS_TO_STORE+=" $1";
fi
case $1 in
--kver) kernel="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
-a|--add) add_dracutmodules_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--force-add) force_add_dracutmodules_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--add-drivers) add_drivers_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--force-drivers) force_drivers_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--omit-drivers) omit_drivers_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
-m|--modules) dracutmodules_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
-o|--omit) omit_dracutmodules_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
-d|--drivers) drivers_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--filesystems) filesystems_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
-I|--install) install_items_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--install-optional) install_optional_items_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--fwdir) fw_dir_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--libdirs) libdirs_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--fscks) fscks_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--add-fstab) add_fstab_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--mount) fstab_lines+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--add-device|--device) add_device_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--kernel-cmdline) kernel_cmdline_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--nofscks) nofscks_l="yes";;
--ro-mnt) ro_mnt_l="yes";;
-k|--kmoddir) drivers_dir_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
-c|--conf) conffile="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--confdir) confdir="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--tmpdir) tmpdir_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
-L|--stdlog) stdloglvl_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--compress) compress_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--prefix) prefix_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--loginstall) loginstall_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--rebuild) if [ $rebuild_file == $outfile ]; then
force=yes
fi
shift
;;
-f|--force) force=yes;;
--kernel-only) kernel_only="yes"; no_kernel="no";;
--no-kernel) kernel_only="no"; no_kernel="yes";;
--print-cmdline)
print_cmdline="yes"; hostonly_l="yes"; kernel_only="yes"; no_kernel="yes";;
--early-microcode)
early_microcode_l="yes";;
--no-early-microcode)
early_microcode_l="no";;
--strip) do_strip_l="yes";;
--nostrip) do_strip_l="no";;
--hardlink) do_hardlink_l="yes";;
--nohardlink) do_hardlink_l="no";;
--noprefix) prefix_l="/";;
--mdadmconf) mdadmconf_l="yes";;
--nomdadmconf) mdadmconf_l="no";;
--lvmconf) lvmconf_l="yes";;
--nolvmconf) lvmconf_l="no";;
--debug) debug="yes";;
--profile) profile="yes";;
--sshkey) sshkey="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--logfile) logfile_l="$2"; shift;;
-v|--verbose) ((verbosity_mod_l++));;
-q|--quiet) ((verbosity_mod_l--));;
-l|--local)
allowlocal="yes"
[[ -f "$(readlink -f "${0%/*}")/dracut-init.sh" ]] \
&& dracutbasedir="$(readlink -f "${0%/*}")"
;;
-H|--hostonly|--host-only)
hostonly_l="yes" ;;
-N|--no-hostonly|--no-host-only)
hostonly_l="no" ;;
--hostonly-mode)
hostonly_mode_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--hostonly-cmdline)
hostonly_cmdline_l="yes" ;;
--hostonly-i18n)
i18n_install_all_l="no" ;;
--hostonly-nics)
hostonly_nics_l+=("$2"); PARMS_TO_STORE+=" '$2'"; shift;;
--no-hostonly-i18n)
i18n_install_all_l="yes" ;;
--no-hostonly-cmdline)
hostonly_cmdline_l="no" ;;
--no-hostonly-default-device)
hostonly_default_device="no" ;;
--persistent-policy)
persistent_policy_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--fstab) use_fstab_l="yes" ;;
-h|--help) long_usage; exit 1 ;;
-i|--include) include_src+=("$2"); PARMS_TO_STORE+=" '$2'";
shift;;
--bzip2) compress_l="bzip2";;
--lzma) compress_l="lzma";;
--xz) compress_l="xz";;
--lzo) compress_l="lzo";;
--lz4) compress_l="lz4";;
--zstd) compress_l="zstd";;
--no-compress) _no_compress_l="cat";;
--gzip) compress_l="gzip";;
--list-modules) do_list="yes";;
-M|--show-modules)
show_modules_l="yes"
;;
--keep) keep="yes";;
--printsize) printsize="yes";;
--regenerate-all) regenerate_all="yes";;
--noimageifnotneeded) noimageifnotneeded="yes";;
--reproducible) reproducible_l="yes";;
--no-reproducible) reproducible_l="no";;
--uefi) uefi="yes";;
--uefi-stub)
uefi_stub_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--kernel-image)
kernel_image_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--no-machineid)
machine_id_l="no";;
--) shift; break;;
*) # should not even reach this point
printf "\n!Unknown option: '%s'\n\n" "$1" >&2; usage; exit 1;;
esac
shift
done
# getopt cannot handle multiple arguments, so just handle "-I,--include"
# the old fashioned way
while (($# > 0)); do
if [ "${1%%=*}" == "++include" ]; then
include_src+=("$2")
include_target+=("$3")
PARMS_TO_STORE+=" --include '$2' '$3'"
shift 2
fi
shift
done
if [[ $regenerate_all == "yes" ]]; then
ret=0
if [[ $kernel ]]; then
printf -- "--regenerate-all cannot be called with a kernel version\n" >&2
exit 1
fi
if [[ $outfile ]]; then
printf -- "--regenerate-all cannot be called with a image file\n" >&2
exit 1
fi
((len=${#dracut_args[@]}))
for ((i=0; i < len; i++)); do
[[ ${dracut_args[$i]} == "--regenerate-all" ]] && \
unset dracut_args[$i]
done
cd /lib/modules
for i in *; do
[[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue
"$dracut_cmd" --kver="$i" "${dracut_args[@]}"
((ret+=$?))
done
exit $ret
fi
if ! [[ $kernel ]]; then
kernel=$(uname -r)
fi
export LC_ALL=C
export LANG=C
unset LC_MESSAGES
unset LC_CTYPE
unset LD_LIBRARY_PATH
unset LD_PRELOAD
unset GREP_OPTIONS
export DRACUT_LOG_LEVEL=warning
[[ $debug ]] && {
export DRACUT_LOG_LEVEL=debug
export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
set -x
}
[[ $profile ]] && {
export PS4='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: ';
set -x
debug=yes
}
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
# if we were not passed a config file, try the default one
if [[ ! -f $conffile ]]; then
if [[ $allowlocal ]]; then
conffile="$dracutbasedir/dracut.conf"
else
conffile="/etc/dracut.conf"
fi
fi
if [[ ! -d $confdir ]]; then
if [[ $allowlocal ]]; then
confdir="$dracutbasedir/dracut.conf.d"
else
confdir="/etc/dracut.conf.d"
fi
fi
# source our config file
if [[ -f $conffile ]]; then
check_conf_file "$conffile"
. "$conffile"
fi
# source our config dir
for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d"); do
check_conf_file "$f"
[[ -e $f ]] && . "$f"
done
DRACUT_PATH=${DRACUT_PATH:-/sbin /bin /usr/sbin /usr/bin}
for i in $DRACUT_PATH; do
rl=$i
if [ -L "$i" ]; then
rl=$(readlink -f $i)
fi
if [[ "$NPATH" != *:$rl* ]] ; then
NPATH+=":$rl"
fi
done
export PATH="${NPATH#:}"
unset NPATH
export SYSTEMCTL=${SYSTEMCTL:-systemctl}
# these options add to the stuff in the config file
(( ${#add_dracutmodules_l[@]} )) && add_dracutmodules+=" ${add_dracutmodules_l[@]} "
(( ${#force_add_dracutmodules_l[@]} )) && force_add_dracutmodules+=" ${force_add_dracutmodules_l[@]} "
(( ${#fscks_l[@]} )) && fscks+=" ${fscks_l[@]} "
(( ${#add_fstab_l[@]} )) && add_fstab+=" ${add_fstab_l[@]} "
(( ${#fstab_lines_l[@]} )) && fstab_lines+=( "${fstab_lines_l[@]}" )
(( ${#install_items_l[@]} )) && install_items+=" ${install_items_l[@]} "
(( ${#install_optional_items_l[@]} )) && install_optional_items+=" ${install_optional_items_l[@]} "
(( ${#hostonly_nics_l[@]} )) && hostonly_nics+=" ${hostonly_nics_l[@]} "
# these options override the stuff in the config file
(( ${#dracutmodules_l[@]} )) && dracutmodules="${dracutmodules_l[@]}"
(( ${#omit_dracutmodules_l[@]} )) && omit_dracutmodules="${omit_dracutmodules_l[@]}"
(( ${#filesystems_l[@]} )) && filesystems="${filesystems_l[@]}"
(( ${#fw_dir_l[@]} )) && fw_dir="${fw_dir_l[@]}"
(( ${#libdirs_l[@]} ))&& libdirs="${libdirs_l[@]}"
[[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l
[[ ! $stdloglvl ]] && stdloglvl=4
stdloglvl=$((stdloglvl + verbosity_mod_l))
((stdloglvl > 6)) && stdloglvl=6
((stdloglvl < 0)) && stdloglvl=0
[[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
[[ $do_strip_l ]] && do_strip=$do_strip_l
[[ $do_strip ]] || do_strip=yes
[[ $do_hardlink_l ]] && do_hardlink=$do_hardlink_l
[[ $do_hardlink ]] || do_hardlink=yes
[[ $prefix_l ]] && prefix=$prefix_l
[[ $prefix = "/" ]] && unset prefix
[[ $hostonly_l ]] && hostonly=$hostonly_l
[[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l
[[ $hostonly_mode_l ]] && hostonly_mode=$hostonly_mode_l
[[ "$hostonly" == "yes" ]] && ! [[ $hostonly_cmdline ]] && hostonly_cmdline="yes"
[[ $i18n_install_all_l ]] && i18n_install_all=$i18n_install_all_l
[[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l
[[ $use_fstab_l ]] && use_fstab=$use_fstab_l
[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
[[ $lvmconf_l ]] && lvmconf=$lvmconf_l
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
[[ $fw_dir ]] || fw_dir="/lib/firmware/updates:/lib/firmware:/lib/firmware/$kernel"
[[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
[[ $tmpdir ]] || tmpdir=/var/tmp
[[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
[[ $compress_l ]] && compress=$compress_l
[[ $show_modules_l ]] && show_modules=$show_modules_l
[[ $nofscks_l ]] && nofscks="yes"
[[ $ro_mnt_l ]] && ro_mnt="yes"
[[ $early_microcode_l ]] && early_microcode=$early_microcode_l
[[ $early_microcode ]] || early_microcode=yes
[[ $logfile_l ]] && logfile="$logfile_l"
[[ $reproducible_l ]] && reproducible="$reproducible_l"
[[ $loginstall_l ]] && loginstall="$loginstall_l"
[[ $uefi_stub_l ]] && uefi_stub="$uefi_stub_l"
[[ $kernel_image_l ]] && kernel_image="$kernel_image_l"
[[ $machine_id_l ]] && machine_id="$machine_id_l"
if ! [[ $outfile ]]; then
if [[ $machine_id != "no" ]]; then
[[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id
fi
if [[ $uefi == "yes" ]]; then
BUILD_ID=$(cat /etc/os-release /usr/lib/os-release \
| while read -r line || [[ $line ]]; do \
[[ $line =~ BUILD_ID\=* ]] && eval "$line" && echo "$BUILD_ID" && break; \
done)
if [[ -d /efi ]] && mountpoint -q /efi; then
efidir=/efi
else
efidir=/boot/EFI
if [[ -d /boot/efi/EFI ]] && mountpoint -q /boot/efi; then
efidir=/boot/efi/EFI
fi
fi
mkdir -p "$efidir/Linux"
outfile="$efidir/Linux/linux-$kernel${MACHINE_ID:+-${MACHINE_ID}}${BUILD_ID:+-${BUILD_ID}}.efi"
else
if [[ -e "/boot/vmlinuz-$kernel" ]]; then
outfile="/boot/initramfs-$kernel.img"
elif [[ $MACHINE_ID ]] && ( [[ -d /boot/${MACHINE_ID} ]] || [[ -L /boot/${MACHINE_ID} ]] ); then
outfile="/boot/${MACHINE_ID}/$kernel/initrd"
else
outfile="/boot/initramfs-$kernel.img"
fi
fi
fi
# eliminate IFS hackery when messing with fw_dir
export DRACUT_FIRMWARE_PATH=${fw_dir// /:}
fw_dir=${fw_dir//:/ }
# check for logfile and try to create one if it doesn't exist
if [[ -n "$logfile" ]];then
if [[ ! -f "$logfile" ]];then
touch "$logfile"
if [ ! $? -eq 0 ] ;then
printf "%s\n" "dracut: touch $logfile failed." >&2
fi
fi
fi
# handle compression options.
if [[ $_no_compress_l = "cat" ]]; then
compress="cat"
fi
[[ $hostonly = yes ]] && hostonly="-h"
[[ $hostonly != "-h" ]] && unset hostonly
case $hostonly_mode in
'')
[[ $hostonly ]] && hostonly_mode="sloppy" ;;
sloppy|strict)
if [[ ! $hostonly ]]; then
unset hostonly_mode
fi
;;
*)
printf "%s\n" "dracut: Invalid hostonly mode '$hostonly_mode'." >&2
exit 1
esac
[[ $reproducible == yes ]] && DRACUT_REPRODUCIBLE=1
readonly TMPDIR="$(realpath -e "$tmpdir")"
[ -d "$TMPDIR" ] || {
printf "%s\n" "dracut: Invalid tmpdir '$tmpdir'." >&2
exit 1
}
readonly DRACUT_TMPDIR="$(mktemp -p "$TMPDIR/" -d -t dracut.XXXXXX)"
[ -d "$DRACUT_TMPDIR" ] || {
printf "%s\n" "dracut: mktemp -p '$TMPDIR/' -d -t dracut.XXXXXX failed." >&2
exit 1
}
# Cache file used to optimize get_maj_min()
declare -x -r get_maj_min_cache_file="${DRACUT_TMPDIR}/majmin_cache"
: > "$get_maj_min_cache_file"
# clean up after ourselves no matter how we die.
trap '
ret=$?;
[[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; };
exit $ret;
' EXIT
# clean up after ourselves no matter how we die.
trap 'exit 1;' SIGINT
readonly initdir="${DRACUT_TMPDIR}/initramfs"
mkdir "$initdir"
if [[ $early_microcode = yes ]] || ( [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]] ); then
readonly early_cpio_dir="${DRACUT_TMPDIR}/earlycpio"
mkdir "$early_cpio_dir"
fi
export DRACUT_RESOLVE_LAZY="1"
if [[ $print_cmdline ]]; then
stdloglvl=0
sysloglvl=0
fileloglvl=0
kmsgloglvl=0
fi
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
. $dracutbasedir/dracut-version.sh
fi
if [[ -f $dracutbasedir/dracut-init.sh ]]; then
. $dracutbasedir/dracut-init.sh
else
printf "%s\n" "dracut: Cannot find $dracutbasedir/dracut-init.sh." >&2
printf "%s\n" "dracut: Are you running from a git checkout?" >&2
printf "%s\n" "dracut: Try passing -l as an argument to $dracut_cmd" >&2
exit 1
fi
if [[ $no_kernel != yes ]] && ! [[ -d $srcmods ]]; then
printf "%s\n" "dracut: Cannot find module directory $srcmods" >&2
printf "%s\n" "dracut: and --no-kernel was not specified" >&2
exit 1
fi
if ! [[ $print_cmdline ]]; then
inst /bin/sh
if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R "$initdir/bin/sh" &>/dev/null; then
unset DRACUT_RESOLVE_LAZY
export DRACUT_RESOLVE_DEPS=1
fi
rm -fr -- ${initdir}/*
fi
dracutfunctions=$dracutbasedir/dracut-functions.sh
export dracutfunctions
(( ${#drivers_l[@]} )) && drivers="${drivers_l[@]}"
drivers=${drivers/-/_}
(( ${#add_drivers_l[@]} )) && add_drivers+=" ${add_drivers_l[@]} "
add_drivers=${add_drivers/-/_}
(( ${#force_drivers_l[@]} )) && force_drivers+=" ${force_drivers_l[@]} "
force_drivers=${force_drivers/-/_}
(( ${#omit_drivers_l[@]} )) && omit_drivers+=" ${omit_drivers_l[@]} "
omit_drivers=${omit_drivers/-/_}
(( ${#kernel_cmdline_l[@]} )) && kernel_cmdline+=" ${kernel_cmdline_l[@]} "
omit_drivers_corrected=""
for d in $omit_drivers; do
[[ " $drivers $add_drivers " == *\ $d\ * ]] && continue
[[ " $drivers $force_drivers " == *\ $d\ * ]] && continue
omit_drivers_corrected+="$d|"
done
omit_drivers="${omit_drivers_corrected%|}"
unset omit_drivers_corrected
# prepare args for logging
for ((i=0; i < ${#dracut_args[@]}; i++)); do
[[ "${dracut_args[$i]}" == *\ * ]] && \
dracut_args[$i]="\"${dracut_args[$i]}\""
#" keep vim happy
done
dinfo "Executing: $dracut_cmd ${dracut_args[@]}"
[[ $do_list = yes ]] && {
for mod in $dracutbasedir/modules.d/*; do
[[ -d $mod ]] || continue;
[[ -e $mod/install || -e $mod/installkernel || \
-e $mod/module-setup.sh ]] || continue
printf "%s\n" "${mod##*/??}"
done
exit 0
}
# This is kinda legacy -- eventually it should go away.
case $dracutmodules in
""|auto) dracutmodules="all" ;;
esac
abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile"
if [[ $no_kernel != yes ]] && [[ -d $srcmods ]]; then
if ! [[ -f $srcmods/modules.dep ]]; then
if [[ -n "$(find "$srcmods" -name '*.ko*')" ]]; then
dfatal "$srcmods/modules.dep is missing. Did you run depmod?"
exit 1
else
dwarn "$srcmods/modules.dep is missing. Did you run depmod?"
fi
elif ! ( command -v gzip &>/dev/null && command -v xz &>/dev/null); then
read _mod < $srcmods/modules.dep
_mod=${_mod%%:*}
if [[ -f $srcmods/"$_mod" ]]; then
# Check, if kernel modules are compressed, and if we can uncompress them
case "$_mod" in
*.ko.gz) kcompress=gzip;;
*.ko.xz) kcompress=xz;;
esac
if [[ $kcompress ]]; then
if ! command -v "$kcompress" &>/dev/null; then
dfatal "Kernel modules are compressed with $kcompress, but $kcompress is not available."
exit 1
fi
fi
fi
fi
fi
if [[ ! $print_cmdline ]]; then
if [[ -f $outfile && ! $force ]]; then
dfatal "Will not override existing initramfs ($outfile) without --force"
exit 1
fi
outdir=${outfile%/*}
[[ $outdir ]] || outdir="/"
if [[ ! -d "$outdir" ]]; then
dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible."
exit 1
elif [[ ! -w "$outdir" ]]; then
dfatal "No permission to write to $outdir."
exit 1
elif [[ -f "$outfile" && ! -w "$outfile" ]]; then
dfatal "No permission to write $outfile."
exit 1
fi
if [[ $loginstall ]]; then
if ! mkdir -p "$loginstall"; then
dfatal "Could not create directory to log installed files to '$loginstall'."
exit 1
fi
loginstall=$(readlink -f "$loginstall")
fi
if [[ $uefi = yes ]]; then
if ! command -v objcopy &>/dev/null; then
dfatal "Need 'objcopy' to create a UEFI executable"
exit 1
fi
unset EFI_MACHINE_TYPE_NAME
case $(arch) in
x86_64)
EFI_MACHINE_TYPE_NAME=x64;;
ia32)
EFI_MACHINE_TYPE_NAME=ia32;;
*)
dfatal "Architecture '$(arch)' not supported to create a UEFI executable"
exit 1
;;
esac
if ! [[ -s $uefi_stub ]]; then
for uefi_stub in \
"${systemdutildir}/boot/efi/linux${EFI_MACHINE_TYPE_NAME}.efi.stub" \
"/usr/lib/gummiboot/linux${EFI_MACHINE_TYPE_NAME}.efi.stub"; do
[[ -s $uefi_stub ]] || continue
break
done
fi
if ! [[ -s $uefi_stub ]]; then
dfatal "Can't find a uefi stub '$uefi_stub' to create a UEFI executable"
exit 1
fi
if ! [[ $kernel_image ]]; then
for kernel_image in "/lib/modules/$kernel/vmlinuz" "/boot/vmlinuz-$kernel"; do
[[ -s "$kernel_image" ]] || continue
break
done
fi
if ! [[ -s $kernel_image ]]; then
dfatal "Can't find a kernel image '$kernel_image' to create a UEFI executable"
exit 1
fi
fi
fi
if [[ $acpi_override = yes ]] && ! ( check_kernel_config CONFIG_ACPI_TABLE_UPGRADE || check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE ); then
dwarn "Disabling ACPI override, because kernel does not support it. CONFIG_ACPI_INITRD_TABLE_OVERRIDE!=y or CONFIG_ACPI_TABLE_UPGRADE!=y"
unset acpi_override
fi
if [[ $early_microcode = yes ]]; then
if [[ $hostonly ]]; then
if [[ $(get_cpu_vendor) == "AMD" || $(get_cpu_vendor) == "Intel" ]]; then
check_kernel_config CONFIG_MICROCODE || unset early_microcode
else
unset early_microcode
fi
else
! check_kernel_config CONFIG_MICROCODE \
&& unset early_microcode
fi
# Do not complain on non-x86 architectures as it makes no sense
case $(uname -m) in
x86_64|i?86)
[[ $early_microcode != yes ]] \
&& dwarn "Disabling early microcode, because kernel does not support it. CONFIG_MICROCODE!=y"
;;
*) ;;
esac
fi
# Need to be able to have non-root users read stuff (rpcbind etc)
chmod 755 "$initdir"
if [[ $hostonly ]]; then
for i in /sys /proc /run /dev; do
if ! findmnt --target "$i" &>/dev/null; then
dwarning "Turning off host-only mode: '$i' is not mounted!"
unset hostonly
fi
done
fi
declare -A host_fs_types
for line in "${fstab_lines[@]}"; do
set -- $line
dev="$1"
#dev mp fs fsopts
case "$dev" in
UUID=*)
dev=$(blkid -l -t UUID=${dev#UUID=} -o device)
;;
LABEL=*)
dev=$(blkid -l -t LABEL=${dev#LABEL=} -o device)
;;
PARTUUID=*)
dev=$(blkid -l -t PARTUUID=${dev#PARTUUID=} -o device)
;;
PARTLABEL=*)
dev=$(blkid -l -t PARTLABEL=${dev#PARTLABEL=} -o device)
;;
esac
[ -z "$dev" ] && dwarn "Bad fstab entry $@" && continue
if [[ "$3" == btrfs ]]; then
for i in $(btrfs_devs "$2"); do
push_host_devs "$i"
done
fi
push_host_devs "$dev"
host_fs_types["$dev"]="$3"
done
for f in $add_fstab; do
[[ -e $f ]] || continue
while read dev rest || [ -n "$dev" ]; do
push_host_devs "$dev"
done < "$f"
done
for dev in $add_device; do
push_host_devs "$dev"
done
if (( ${#add_device_l[@]} )); then
add_device+=" ${add_device_l[@]} "
push_host_devs "${add_device_l[@]}"
fi
if [[ $hostonly ]] && [[ "$hostonly_default_device" != "no" ]]; then
# in hostonly mode, determine all devices, which have to be accessed
# and examine them for filesystem types
for mp in \
"/" \
"/etc" \
"/bin" \
"/sbin" \
"/lib" \
"/lib64" \
"/usr" \
"/usr/bin" \
"/usr/sbin" \
"/usr/lib" \
"/usr/lib64" \
"/boot" \
"/boot/efi" \
"/boot/zipl" \
;
do
mp=$(readlink -f "$mp")
mountpoint "$mp" >/dev/null 2>&1 || continue
_dev=$(find_block_device "$mp")
_bdev=$(readlink -f "/dev/block/$_dev")
[[ -b $_bdev ]] && _dev=$_bdev
[[ "$mp" == "/" ]] && root_devs+=("$_dev")
push_host_devs "$_dev"
if [[ $(find_mp_fstype "$mp") == btrfs ]]; then
for i in $(btrfs_devs "$mp"); do
[[ "$mp" == "/" ]] && root_devs+=("$i")
push_host_devs "$i"
done
fi
done
if [[ -f /proc/swaps ]] && [[ -f /etc/fstab ]]; then
while read dev type rest || [ -n "$dev" ]; do
[[ -b $dev ]] || continue
[[ "$type" == "partition" ]] || continue
while read _d _m _t _o _r || [ -n "$_d" ]; do
[[ "$_d" == \#* ]] && continue
[[ $_d ]] || continue
[[ $_t != "swap" ]] && continue
[[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue
[[ "$_o" == *noauto* ]] && continue
_d=$(expand_persistent_dev "$_d")
[[ "$_d" -ef "$dev" ]] || continue
if [[ -f /etc/crypttab ]]; then
while read _mapper _a _p _o || [ -n "$_mapper" ]; do
[[ $_mapper = \#* ]] && continue
[[ "$_d" -ef /dev/mapper/"$_mapper" ]] || continue
[[ "$_o" ]] || _o="$_p"
# skip entries with password files
[[ "$_p" == /* ]] && [[ -f $_p ]] && continue 2
# skip mkswap swap
[[ $_o == *swap* ]] && continue 2
done < /etc/crypttab
fi
_dev="$(readlink -f "$dev")"
push_host_devs "$_dev"
swap_devs+=("$_dev")
break
done < /etc/fstab
done < /proc/swaps
fi
# collect all "x-initrd.mount" entries from /etc/fstab
if [[ -f /etc/fstab ]]; then
while read _d _m _t _o _r || [ -n "$_d" ]; do
[[ "$_d" == \#* ]] && continue
[[ $_d ]] || continue
[[ "$_o" != *x-initrd.mount* ]] && continue
_dev=$(expand_persistent_dev "$_d")
_dev="$(readlink -f "$_dev")"
[[ -b $_dev ]] || continue
push_host_devs "$_dev"
if [[ "$_t" == btrfs ]]; then
for i in $(btrfs_devs "$_m"); do
push_host_devs "$i"
done
fi
done < /etc/fstab
fi
fi
unset m
unset rest
_get_fs_type() {
[[ $1 ]] || return
if [[ -b /dev/block/$1 ]]; then
ID_FS_TYPE=$(get_fs_env "/dev/block/$1") && host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE"
return 1
fi
if [[ -b $1 ]]; then
ID_FS_TYPE=$(get_fs_env "$1") && host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE"
return 1
fi
if fstype=$(find_dev_fstype "$1"); then
host_fs_types["$1"]="$fstype"
return 1
fi
return 1
}
for dev in "${host_devs[@]}"; do
_get_fs_type "$dev"
check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
done
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
rootopts=$(find_dev_fsopts "$dev")
if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
journaldev=$(fs_get_option $rootopts "jdev")
elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
journaldev=$(fs_get_option $rootopts "logdev")
fi
if [[ $journaldev ]]; then
dev="$(readlink -f "$dev")"
push_host_devs "$dev"
_get_fs_type "$dev"
check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
fi
done
[[ -d $udevdir ]] \
|| udevdir="$(pkg-config udev --variable=udevdir 2>/dev/null)"
if ! [[ -d "$udevdir" ]]; then
[[ -e /lib/udev/collect ]] && udevdir=/lib/udev
[[ -e /usr/lib/udev/collect ]] && udevdir=/usr/lib/udev
fi
[[ -d $udevconfdir ]] \
|| udevconfdir="$(pkg-config udev --variable=udevconfdir 2>/dev/null)"
if ! [[ -d "$udevconfdir" ]]; then
[[ -d /etc/udev ]] && udevconfdir=/etc/udev
fi
[[ -d $systemdutildir ]] \
|| systemdutildir=$(pkg-config systemd --variable=systemdutildir 2>/dev/null)
if ! [[ -d "$systemdutildir" ]]; then
[[ -e /lib/systemd/systemd-udevd ]] && systemdutildir=/lib/systemd
[[ -e /usr/lib/systemd/systemd-udevd ]] && systemdutildir=/usr/lib/systemd
fi
[[ -d $systemdsystemunitdir ]] \
|| systemdsystemunitdir=$(pkg-config systemd --variable=systemdsystemunitdir 2>/dev/null)
[[ -d "$systemdsystemunitdir" ]] || systemdsystemunitdir=${systemdutildir}/system
[[ -d $systemdsystemconfdir ]] \
|| systemdsystemconfdir=$(pkg-config systemd --variable=systemdsystemconfdir 2>/dev/null)
[[ -d "$systemdsystemconfdir" ]] || systemdsystemconfdir=/etc/systemd/system
[[ -d $tmpfilesdir ]] \
|| tmpfilesdir=$(pkg-config systemd --variable=tmpfilesdir 2>/dev/null)
if ! [[ -d "$tmpfilesdir" ]]; then
[[ -d /lib/tmpfiles.d ]] && tmpfilesdir=/lib/tmpfiles.d
[[ -d /usr/lib/tmpfiles.d ]] && tmpfilesdir=/usr/lib/tmpfiles.d
fi
export initdir dracutbasedir \
dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \
mods_to_load \
fw_dir drivers_dir debug no_kernel kernel_only \
omit_drivers mdadmconf lvmconf root_devs \
use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
debug host_fs_types host_devs swap_devs sshkey add_fstab \
DRACUT_VERSION udevdir prefix filesystems drivers \
systemdutildir systemdsystemunitdir systemdsystemconfdir \
hostonly_cmdline loginstall \
tmpfilesdir
mods_to_load=""
# check all our modules to see if they should be sourced.
# This builds a list of modules that we will install next.
for_each_module_dir check_module
for_each_module_dir check_mount
dracut_module_included "fips" && export DRACUT_FIPS_MODE=1
do_print_cmdline()
{
local -A _mods_to_print
for i in $modules_loaded $mods_to_load; do
_mods_to_print[$i]=1
done
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
_d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
[[ ${_mods_to_print[$_d_mod]} ]] || continue
module_cmdline "$_d_mod" "$moddir"
done
unset moddir
}
if [[ $print_cmdline ]]; then
do_print_cmdline
printf "\n"
exit 0
fi
# Create some directory structure first
[[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}"
[[ -h /lib ]] || mkdir -m 0755 -p "${initdir}${prefix}/lib"
[[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib"
if [[ $prefix ]]; then
for d in bin etc lib sbin tmp usr var $libdirs; do
[[ "$d" == */* ]] && continue
ln -sfn "${prefix#/}/${d#/}" "$initdir/$d"
done
fi
if [[ $kernel_only != yes ]]; then
for d in usr/bin usr/sbin bin etc lib sbin tmp usr var var/tmp $libdirs; do
[[ -e "${initdir}${prefix}/$d" ]] && continue
if [ -L "/$d" ]; then
inst_symlink "/$d" "${prefix}/$d"
else
mkdir -m 0755 -p "${initdir}${prefix}/$d"
fi
done
for d in dev proc sys sysroot root run; do
if [ -L "/$d" ]; then
inst_symlink "/$d"
else
mkdir -m 0755 -p "$initdir/$d"
fi
done
ln -sfn ../run "$initdir/var/run"
ln -sfn ../run/lock "$initdir/var/lock"
else
for d in lib "$libdir"; do
[[ -e "${initdir}${prefix}/$d" ]] && continue
if [ -h "/$d" ]; then
inst "/$d" "${prefix}/$d"
else
mkdir -m 0755 -p "${initdir}${prefix}/$d"
fi
done
fi
if [[ $kernel_only != yes ]]; then
mkdir -p "${initdir}/etc/cmdline.d"
for _d in $hookdirs; do
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
done
if [[ "$EUID" = "0" ]]; then
[ -c ${initdir}/dev/null ] || mknod ${initdir}/dev/null c 1 3
[ -c ${initdir}/dev/kmsg ] || mknod ${initdir}/dev/kmsg c 1 11
[ -c ${initdir}/dev/console ] || mknod ${initdir}/dev/console c 5 1
[ -c ${initdir}/dev/random ] || mknod ${initdir}/dev/random c 1 8
[ -c ${initdir}/dev/urandom ] || mknod ${initdir}/dev/urandom c 1 9
fi
fi
_isize=0 #initramfs size
modules_loaded=" "
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
_d_mod=${moddir##*/}; _d_mod=${_d_mod#[0-9][0-9]}
[[ "$mods_to_load" == *\ $_d_mod\ * ]] || continue
if [[ $show_modules = yes ]]; then
printf "%s\n" "$_d_mod"
else
dinfo "*** Including module: $_d_mod ***"
fi
if [[ $kernel_only == yes ]]; then
module_installkernel "$_d_mod" "$moddir" || {
dfatal "installkernel failed in module $_d_mod"
exit 1
}
else
module_install "$_d_mod" "$moddir"
if [[ $no_kernel != yes ]]; then
module_installkernel "$_d_mod" "$moddir" || {
dfatal "installkernel failed in module $_d_mod"
exit 1
}
fi
fi
mods_to_load=${mods_to_load// $_d_mod /}
modules_loaded+="$_d_mod "
#print the module install size
if [ -n "$printsize" ]; then
_isize_new=$(du -sk ${initdir}|cut -f1)
_isize_delta=$((_isize_new - _isize))
printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
_isize=$_isize_new
fi
done
unset moddir
for i in $modules_loaded; do
mkdir -p $initdir/lib/dracut
printf "%s\n" "$i" >> $initdir/lib/dracut/modules.txt
done
dinfo "*** Including modules done ***"
## final stuff that has to happen
if [[ $no_kernel != yes ]]; then
if [[ $hostonly ]]; then
echo "$(get_loaded_kernel_modules)" > $initdir/lib/dracut/loaded-kernel-modules.txt
fi
if [[ $drivers ]]; then
hostonly='' instmods $drivers
fi
if [[ -n "${add_drivers// }" ]]; then
hostonly='' instmods -c $add_drivers
fi
if [[ $force_drivers ]]; then
hostonly='' instmods -c $force_drivers
rm -f $initdir/etc/cmdline.d/20-force_driver.conf
for mod in $force_drivers; do
echo "rd.driver.pre=$mod" >>$initdir/etc/cmdline.d/20-force_drivers.conf
done
fi
if [[ $filesystems ]]; then
hostonly='' instmods -c $filesystems
fi
dinfo "*** Installing kernel module dependencies ***"
dracut_kernel_post
dinfo "*** Installing kernel module dependencies done ***"
if [[ $noimageifnotneeded == yes ]] && [[ $hostonly ]]; then
if [[ ! -f "$initdir/lib/dracut/need-initqueue" ]] && \
[[ -f ${initdir}/lib/modules/$kernel/modules.dep && ! -s ${initdir}/lib/modules/$kernel/modules.dep ]]; then
for i in ${initdir}/etc/cmdline.d/*.conf; do
# We need no initramfs image and do not generate one.
[[ $i == "${initdir}/etc/cmdline.d/*.conf" ]] && exit 0
done
fi
fi
fi
if [[ $kernel_only != yes ]]; then
(( ${#install_items[@]} > 0 )) && inst_multiple ${install_items[@]}
(( ${#install_optional_items[@]} > 0 )) && inst_multiple -o ${install_optional_items[@]}
[[ $kernel_cmdline ]] && printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf"
for line in "${fstab_lines[@]}"; do
line=($line)
if [ -z "${line[1]}" ]; then
# Determine device and mount options from current system
mountpoint -q "${line[0]}" || derror "${line[0]} is not a mount point!"
line=($(findmnt --raw -n --target "${line[0]}" --output=source,target,fstype,options))
dinfo "Line for ${line[1]}: ${line[@]}"
else
# Use default options
[ -z "${line[3]}" ] && line[3]="defaults"
fi
# Default options for freq and passno
[ -z "${line[4]}" ] && line[4]="0"
[ -z "${line[5]}" ] && line[5]="2"
strstr "${line[2]}" "nfs" && line[5]="0"
echo "${line[@]}" >> "${initdir}/etc/fstab"
done
for f in $add_fstab; do
cat "$f" >> "${initdir}/etc/fstab"
done
if [[ $systemdutildir ]]; then
if [ -d ${initdir}/$systemdutildir ]; then
mkdir -p ${initdir}/etc/conf.d
{
printf "%s\n" "systemdutildir=\"$systemdutildir\""
printf "%s\n" "systemdsystemunitdir=\"$systemdsystemunitdir\""
printf "%s\n" "systemdsystemconfdir=\"$systemdsystemconfdir\""
} > ${initdir}/etc/conf.d/systemd.conf
fi
fi
if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then
dinfo "*** Resolving executable dependencies ***"
find "$initdir" -type f -perm /0111 -not -path '*.ko' -print0 \
| xargs -r -0 $DRACUT_INSTALL ${initdir:+-D "$initdir"} -R ${DRACUT_FIPS_MODE:+-f} --
dinfo "*** Resolving executable dependencies done***"
fi
# Now we are done with lazy resolving, always install dependencies
unset DRACUT_RESOLVE_LAZY
export DRACUT_RESOLVE_DEPS=1
fi
for ((i=0; i < ${#include_src[@]}; i++)); do
src="${include_src[$i]}"
target="${include_target[$i]}"
if [[ $src && $target ]]; then
if [[ -f $src ]]; then
inst $src $target
else
ddebug "Including directory: $src"
destdir="${initdir}/${target}"
mkdir -p "$destdir"
# check for preexisting symlinks, so we can cope with the
# symlinks to $prefix
# Objectname is a file or a directory
reset_dotglob="$(shopt -p dotglob)"
shopt -q -s dotglob
for objectname in "$src"/*; do
[[ -e $objectname || -L $objectname ]] || continue
if [[ -d $objectname ]] && [[ ! -L $objectname ]]; then
# objectname is a directory, let's compute the final directory name
object_destdir=${destdir}/${objectname#$src/}
if ! [[ -e "$object_destdir" ]]; then
mkdir -m 0755 -p "$object_destdir"
chmod --reference="$objectname" "$object_destdir"
fi
$DRACUT_CP -t "$object_destdir" "$objectname"/.
else
$DRACUT_CP -t "$destdir" "$objectname"
fi
done
eval "$reset_dotglob"
fi
fi
done
if [[ $kernel_only != yes ]]; then
# make sure that library links are correct and up to date
build_ld_cache
fi
if [[ $do_hardlink = yes ]] && command -v hardlink >/dev/null; then
dinfo "*** Hardlinking files ***"
hardlink "$initdir" 2>&1
dinfo "*** Hardlinking files done ***"
fi
# strip binaries
if [[ $do_strip = yes ]] ; then
# Prefer strip from elfutils for package size
declare strip_cmd=$(command -v eu-strip)
test -z "$strip_cmd" && strip_cmd="strip"
for p in $strip_cmd xargs find; do
if ! type -P $p >/dev/null; then
dinfo "Could not find '$p'. Not stripping the initramfs."
do_strip=no
fi
done
fi
# cleanup empty ldconfig_paths directories
for d in $(ldconfig_paths); do
rmdir -p --ignore-fail-on-non-empty "$initdir/$d" >/dev/null 2>&1
done
if [[ $early_microcode = yes ]]; then
dinfo "*** Generating early-microcode cpio image ***"
ucode_dir=(amd-ucode intel-ucode)
ucode_dest=(AuthenticAMD.bin GenuineIntel.bin)
_dest_dir="$early_cpio_dir/d/kernel/x86/microcode"
_dest_idx="0 1"
mkdir -p $_dest_dir
if [[ $hostonly ]]; then
[[ $(get_cpu_vendor) == "AMD" ]] && _dest_idx="0"
[[ $(get_cpu_vendor) == "Intel" ]] && _dest_idx="1"
fi
for idx in $_dest_idx; do
_fw=${ucode_dir[$idx]}
for _fwdir in $fw_dir; do
if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then
_src="*"
dinfo "*** Constructing ${ucode_dest[$idx]} ***"
if [[ $hostonly ]]; then
_src=$(get_ucode_file)
[[ $_src ]] || break
[[ -r $_fwdir/$_fw/$_src ]] || break
fi
for i in $_fwdir/$_fw/$_src; do
[ -e "$i" ] && break
break 2
done
for i in $_fwdir/$_fw/$_src; do
[[ -e "$i" ]] || continue
# skip gpg files
str_ends "$i" ".asc" && continue
cat "$i" >> $_dest_dir/${ucode_dest[$idx]}
done
create_early_cpio="yes"
fi
done
done
fi
if [[ $acpi_override = yes ]] && [[ -d $acpi_table_dir ]]; then
dinfo "*** Packaging ACPI tables to override BIOS provided ones ***"
_dest_dir="$early_cpio_dir/d/kernel/firmware/acpi"
mkdir -p $_dest_dir
for table in $acpi_table_dir/*.aml; do
dinfo " Adding ACPI table: $table"
$DRACUT_CP $table $_dest_dir
create_early_cpio="yes"
done
fi
dinfo "*** Store current command line parameters ***"
if ! ( echo $PARMS_TO_STORE > $initdir/lib/dracut/build-parameter.txt ); then
dfatal "Could not store the current command line parameters"
exit 1
fi
if [[ $hostonly_cmdline == "yes" ]] ; then
unset _stored_cmdline
if [ -d $initdir/etc/cmdline.d ];then
dinfo "Stored kernel commandline:"
for conf in $initdir/etc/cmdline.d/*.conf ; do
[ -e "$conf" ] || continue
dinfo "$(< $conf)"
_stored_cmdline=1
done
fi
if ! [[ $_stored_cmdline ]]; then
dinfo "No dracut internal kernel commandline stored in the initramfs"
fi
fi
if [[ $kernel_only != yes ]]; then
# libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so
for _dir in $libdirs; do
for _f in "$dracutsysrootdir$_dir/libpthread.so"*; do
[[ -e "$_f" ]] || continue
inst_libdir_file "libgcc_s.so*"
break 2
done
done
# FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled
if [[ $DRACUT_FIPS_MODE ]]; then
for _dir in $libdirs; do
for _f in "$dracutsysrootdir$_dir/libcrypto.so"*; do
[[ -e "$_f" ]] || continue
inst_libdir_file -o "libssl.so*"
break 2
done
done
fi
fi
if dracut_module_included "squash"; then
readonly squash_dir="$initdir/squash/root"
readonly squash_img="$initdir/squash-root.img"
mkdir -p "$squash_dir"
dinfo "*** Install squash loader ***"
DRACUT_SQUASH_POST_INST=1 module_install "squash"
fi
if [[ $do_strip = yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
dinfo "*** Stripping files ***"
find "$initdir" -type f \
-executable -not -path '*/lib/modules/*.ko' -print0 \
| xargs -r -0 $strip_cmd -g -p 2>/dev/null
# strip kernel modules, but do not touch signed modules
find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \
| while read -r -d $'\0' f || [ -n "$f" ]; do
SIG=$(tail -c 28 "$f" | tr -d '\000')
[[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; }
done | xargs -r -0 $strip_cmd -g -p
dinfo "*** Stripping files done ***"
fi
if dracut_module_included "squash"; then
dinfo "*** Squashing the files inside the initramfs ***"
declare squash_compress_arg
# shellcheck disable=SC2086
if [[ $compress ]]; then
if ! mksquashfs /dev/null "$DRACUT_TMPDIR"/.squash-test.img -no-progress -comp $compress &>/dev/null; then
dwarn "mksquashfs doesn't support compressor '$compress', failing back to default compressor."
else
squash_compress_arg="$compress"
fi
fi
# shellcheck disable=SC2086
if ! mksquashfs "$squash_dir" "$squash_img" \
-no-xattrs -no-exports -noappend -no-recovery -always-use-fragments \
-no-progress ${squash_compress_arg:+-comp $squash_compress_arg} 1> /dev/null; then
dfatal "dracut: Failed making squash image"
exit 1
fi
rm -rf "$squash_dir"
dinfo "*** Squashing the files inside the initramfs done ***"
# Skip initramfs compress
compress="cat"
fi
dinfo "*** Creating image file '$outfile' ***"
if [[ $uefi = yes ]]; then
readonly uefi_outdir="$DRACUT_TMPDIR/uefi"
mkdir "$uefi_outdir"
fi
if [[ $DRACUT_REPRODUCIBLE ]]; then
find "$initdir" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
| xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
if [[ "$(cpio --help)" == *--reproducible* ]]; then
CPIO_REPRODUCIBLE=1
else
dinfo "cpio does not support '--reproducible'. Resulting image will not be reproducible."
fi
fi
[[ "$EUID" != 0 ]] && cpio_owner_root="-R 0:0"
if [[ $create_early_cpio = yes ]]; then
echo 1 > "$early_cpio_dir/d/early_cpio"
if [[ $DRACUT_REPRODUCIBLE ]]; then
find "$early_cpio_dir/d" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
| xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
fi
# The microcode blob is _before_ the initramfs blob, not after
if ! (
umask 077; cd "$early_cpio_dir/d"
find . -print0 | sort -z \
| cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null $cpio_owner_root -H newc -o --quiet > "${DRACUT_TMPDIR}/initramfs.img"
); then
dfatal "dracut: creation of $outfile failed"
exit 1
fi
fi
if ! [[ $compress ]]; then
# check all known compressors, if none specified
for i in pigz gzip lz4 lzop zstd lzma xz lbzip2 bzip2 cat; do
command -v "$i" &>/dev/null || continue
compress="$i"
break
done
if [[ $compress = cat ]]; then
printf "%s\n" "dracut: no compression tool available. Initramfs image is going to be big." >&2
fi
fi
# choose the right arguments for the compressor
case $compress in
bzip2|lbzip2)
if [[ "$compress" = lbzip2 ]] || command -v lbzip2 &>/dev/null; then
compress="lbzip2 -9"
else
compress="bzip2 -9"
fi
;;
lzma)
compress="lzma -9 -T0"
;;
xz)
compress="xz --check=crc32 --lzma2=dict=1MiB -T0"
;;
gzip|pigz)
if [[ "$compress" = pigz ]] || command -v pigz &>/dev/null; then
compress="pigz -9 -n -T -R"
elif command -v gzip &>/dev/null && gzip --help 2>&1 | grep -q rsyncable; then
compress="gzip -n -9 --rsyncable"
else
compress="gzip -n -9"
fi
;;
lzo|lzop)
compress="lzop -9"
;;
lz4)
compress="lz4 -l -9"
;;
zstd)
compress="zstd -15 -q -T0"
;;
esac
if ! (
umask 077; cd "$initdir"
find . -print0 | sort -z \
| cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null $cpio_owner_root -H newc -o --quiet \
| $compress >> "${DRACUT_TMPDIR}/initramfs.img"
); then
dfatal "dracut: creation of $outfile failed"
exit 1
fi
if (( maxloglvl >= 5 )) && (( verbosity_mod_l >= 0 )); then
if [[ $allowlocal ]]; then
"$dracutbasedir/lsinitrd.sh" "${DRACUT_TMPDIR}/initramfs.img"| ddebug
else
lsinitrd "${DRACUT_TMPDIR}/initramfs.img"| ddebug
fi
fi
umask 077
if [[ $uefi = yes ]]; then
if [[ $kernel_cmdline ]]; then
echo -n "$kernel_cmdline" > "$uefi_outdir/cmdline.txt"
elif [[ $hostonly_cmdline = yes ]] && [ -d $initdir/etc/cmdline.d ];then
for conf in $initdir/etc/cmdline.d/*.conf ; do
[ -e "$conf" ] || continue
printf "%s " "$(< $conf)" >> "$uefi_outdir/cmdline.txt"
done
else
do_print_cmdline > "$uefi_outdir/cmdline.txt"
fi
echo -ne "\x00" >> "$uefi_outdir/cmdline.txt"
dinfo "Using UEFI kernel cmdline:"
dinfo $(< "$uefi_outdir/cmdline.txt")
[[ -s /usr/lib/os-release ]] && uefi_osrelease="/usr/lib/os-release"
[[ -s /etc/os-release ]] && uefi_osrelease="/etc/os-release"
if objcopy \
${uefi_osrelease:+--add-section .osrel=$uefi_osrelease --change-section-vma .osrel=0x20000} \
--add-section .cmdline="${uefi_outdir}/cmdline.txt" --change-section-vma .cmdline=0x30000 \
--add-section .linux="$kernel_image" --change-section-vma .linux=0x40000 \
--add-section .initrd="${DRACUT_TMPDIR}/initramfs.img" --change-section-vma .initrd=0x3000000 \
"$uefi_stub" "${uefi_outdir}/linux.efi" \
&& cp --reflink=auto "${uefi_outdir}/linux.efi" "$outfile"; then
dinfo "*** Creating UEFI image file '$outfile' done ***"
else
rm -f -- "$outfile"
dfatal "*** Creating UEFI image file '$outfile' failed ***"
exit 1
fi
else
if cp --reflink=auto "${DRACUT_TMPDIR}/initramfs.img" "$outfile"; then
dinfo "*** Creating initramfs image file '$outfile' done ***"
else
rm -f -- "$outfile"
dfatal "dracut: creation of $outfile failed"
exit 1
fi
fi
command -v restorecon &>/dev/null && restorecon -- "$outfile"
# We sync/fsfreeze only if we're operating on a live booted system.
# It's possible for e.g. `kernel` to be installed as an RPM BuildRequires or equivalent,
# and there's no reason to sync, and *definitely* no reason to fsfreeze.
# Another case where this happens is rpm-ostree, which performs its own sync/fsfreeze
# globally. See e.g. https://github.com/ostreedev/ostree/commit/8642ef5ab3fec3ac8eb8f193054852f83a8bc4d0
if test -d /run/systemd/system; then
if ! sync "$outfile" 2> /dev/null; then
dinfo "dracut: sync operation on newly created initramfs $outfile failed"
exit 1
fi
# use fsfreeze only if we're not writing to /
if [[ "$(stat -c %m -- "$outfile")" != "/" && "$(stat -f -c %T -- "$outfile")" != "msdos" ]]; then
if ! $(fsfreeze -f $(dirname "$outfile") 2>/dev/null && fsfreeze -u $(dirname "$outfile") 2>/dev/null); then
dinfo "dracut: warning: could not fsfreeze $(dirname "$outfile")"
fi
fi
fi
exit 0
dracut-logger.sh 0000755 00000031770 15252504523 0007655 0 ustar 00 #!/bin/bash
#
# logging faciality module for dracut both at build- and boot-time
#
# Copyright 2010 Amadeusz Żołnowski
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
__DRACUT_LOGGER__=1
## @brief Logging facility module for dracut both at build- and boot-time.
#
# @section intro Introduction
#
# The logger takes a bit from Log4j philosophy. There are defined 6 logging
# levels:
# - TRACE (6)
# The TRACE Level designates finer-grained informational events than the
# DEBUG.
# - DEBUG (5)
# The DEBUG Level designates fine-grained informational events that are most
# useful to debug an application.
# - INFO (4)
# The INFO level designates informational messages that highlight the
# progress of the application at coarse-grained level.
# - WARN (3)
# The WARN level designates potentially harmful situations.
# - ERROR (2)
# The ERROR level designates error events that might still allow the
# application to continue running.
# - FATAL (1)
# The FATAL level designates very severe error events that will presumably
# lead the application to abort.
# Descriptions are borrowed from Log4j documentation:
# http://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/Level.html
#
# @section usage Usage
#
# First of all you have to start with dlog_init() function which initializes
# required variables. Don't call any other logging function before that one!
# If you're ready with this, you can use following functions which corresponds
# clearly to levels listed in @ref intro Introduction. Here they are:
# - dtrace()
# - ddebug()
# - dinfo()
# - dwarn()
# - derror()
# - dfatal()
# They take all arguments given as a single message to be logged. See dlog()
# function for details how it works. Note that you shouldn't use dlog() by
# yourself. It's wrapped with above functions.
#
# @see dlog_init() dlog()
#
# @section conf Configuration
#
# Logging is controlled by following global variables:
# - @var stdloglvl - logging level to standard error (console output)
# - @var sysloglvl - logging level to syslog (by logger command)
# - @var fileloglvl - logging level to file
# - @var kmsgloglvl - logging level to /dev/kmsg (only for boot-time)
# - @var logfile - log file which is used when @var fileloglvl is higher
# than 0
# and two global variables: @var maxloglvl and @var syslogfacility which must
# not be overwritten. Both are set by dlog_init(). @var maxloglvl holds
# maximum logging level of those three and indicates that dlog_init() was run.
# @var syslogfacility is set either to 'user' (when building initramfs) or
# 'daemon' (when booting).
#
# Logging level set by the variable means that messages from this logging level
# and above (FATAL is the highest) will be shown. Logging levels may be set
# independently for each destination (stderr, syslog, file, kmsg).
#
# @see dlog_init()
## @brief Initializes dracut Logger.
#
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
# @note This function need to be called before any other from this file.
#
# If any of the variables is not set, this function set it to default:
# - @var stdloglvl = 4 (info)
# - @var sysloglvl = 0 (no logging)
# - @var fileloglvl is set to 4 when @var logfile is set too, otherwise it's
# - @var kmsgloglvl = 0 (no logging)
# set to 0
#
# @warning Function sets global variables @var maxloglvl and @syslogfacility.
# See file doc comment for details.
dlog_init() {
local __oldumask
local ret=0; local errmsg
[ -z "$stdloglvl" ] && stdloglvl=4
[ -z "$sysloglvl" ] && sysloglvl=0
[ -z "$kmsgloglvl" ] && kmsgloglvl=0
# Skip initialization if it's already done.
[ -n "$maxloglvl" ] && return 0
if [ -z "$fileloglvl" ]; then
[ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0
elif (( $fileloglvl > 0 )); then
if [[ $logfile ]]; then
__oldumask=$(umask)
umask 0377
! [ -e "$logfile" ] && >"$logfile"
umask $__oldumask
if [ -w "$logfile" -a -f "$logfile" ]; then
# Mark new run in the log file
echo >>"$logfile"
if command -v date >/dev/null; then
echo "=== $(date) ===" >>"$logfile"
else
echo "===============================================" >>"$logfile"
fi
echo >>"$logfile"
else
# We cannot log to file, so turn this facility off.
fileloglvl=0
ret=1
errmsg="'$logfile' is not a writable file"
fi
fi
fi
if (( $UID != 0 )); then
kmsgloglvl=0
sysloglvl=0
fi
if (( $sysloglvl > 0 )); then
if [[ -d /run/systemd/journal ]] \
&& type -P systemd-cat &>/dev/null \
&& systemctl --quiet is-active systemd-journald.socket &>/dev/null \
&& { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
readonly _systemdcatfile="$DRACUT_TMPDIR/systemd-cat"
mkfifo "$_systemdcatfile"
readonly _dlogfd=15
systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
exec 15>"$_systemdcatfile"
elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
# We cannot log to syslog, so turn this facility off.
kmsgloglvl=$sysloglvl
sysloglvl=0
ret=1
errmsg="No '/dev/log' or 'logger' included for syslog logging"
fi
fi
if (($sysloglvl > 0)) || (($kmsgloglvl > 0 )); then
if [ -n "$dracutbasedir" ]; then
readonly syslogfacility=user
else
readonly syslogfacility=daemon
fi
export syslogfacility
fi
local lvl; local maxloglvl_l=0
for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl; do
(( $lvl > $maxloglvl_l )) && maxloglvl_l=$lvl
done
readonly maxloglvl=$maxloglvl_l
export maxloglvl
if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then
unset dtrace
dtrace() { :; };
fi
if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then
unset ddebug
ddebug() { :; };
fi
if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then
unset dinfo
dinfo() { :; };
fi
if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then
unset dwarn
dwarn() { :; };
unset dwarning
dwarning() { :; };
fi
if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then
unset derror
derror() { :; };
fi
if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then
unset dfatal
dfatal() { :; };
fi
[ -n "$errmsg" ] && derror "$errmsg"
return $ret
}
## @brief Converts numeric logging level to the first letter of level name.
#
# @param lvl Numeric logging level in range from 1 to 6.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes first letter of level name.
_lvl2char() {
case "$1" in
1) echo F;;
2) echo E;;
3) echo W;;
4) echo I;;
5) echo D;;
6) echo T;;
*) return 1;;
esac
}
## @brief Converts numeric level to logger priority defined by POSIX.2.
#
# @param lvl Numeric logging level in range from 1 to 6.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes logger priority.
_lvl2syspri() {
printf $syslogfacility.
case "$1" in
1) echo crit;;
2) echo error;;
3) echo warning;;
4) echo info;;
5) echo debug;;
6) echo debug;;
*) return 1;;
esac
}
## @brief Converts dracut-logger numeric level to syslog log level
#
# @param lvl Numeric logging level in range from 1 to 6.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes kernel console numeric log level
#
# Conversion is done as follows:
#
#
# none -> LOG_EMERG (0)
# none -> LOG_ALERT (1)
# FATAL(1) -> LOG_CRIT (2)
# ERROR(2) -> LOG_ERR (3)
# WARN(3) -> LOG_WARNING (4)
# none -> LOG_NOTICE (5)
# INFO(4) -> LOG_INFO (6)
# DEBUG(5) -> LOG_DEBUG (7)
# TRACE(6) /
#
#
# @see /usr/include/sys/syslog.h
_dlvl2syslvl() {
local lvl
case "$1" in
1) lvl=2;;
2) lvl=3;;
3) lvl=4;;
4) lvl=6;;
5) lvl=7;;
6) lvl=7;;
*) return 1;;
esac
[ "$syslogfacility" = user ] && echo $((8+$lvl)) || echo $((24+$lvl))
}
## @brief Prints to stderr and/or writes to file, to syslog and/or /dev/kmsg
# given message with given level (priority).
#
# @param lvl Numeric logging level.
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dtrace(), ddebug(), or others instead which wrap this one.
#
# This is core logging function which logs given message to standard error, file
# and/or syslog (with POSIX shell command logger) and/or to /dev/kmsg.
# The format is following:
#
# X: some message
#
# where @c X is the first letter of logging level. See module description for
# details on that.
#
# Message to syslog is sent with tag @c dracut. Priorities are mapped as
# following:
# - @c FATAL to @c crit
# - @c ERROR to @c error
# - @c WARN to @c warning
# - @c INFO to @c info
# - @c DEBUG and @c TRACE both to @c debug
_do_dlog() {
local lvl="$1"; shift
local lvlc=$(_lvl2char "$lvl") || return 0
local msg="$*"
local lmsg="$lvlc: $*"
(( $lvl <= $stdloglvl )) && printf -- 'dracut: %s\n' "$msg" >&2
if (( $lvl <= $sysloglvl )); then
if [[ "$_dlogfd" ]]; then
printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
else
logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
fi
fi
if (( $lvl <= $fileloglvl )) && [[ -w "$logfile" ]] && [[ -f "$logfile" ]]; then
echo "$lmsg" >>"$logfile"
fi
(( $lvl <= $kmsgloglvl )) && \
echo "<$(_dlvl2syslvl $lvl)>dracut[$$] $msg" >/dev/kmsg
}
## @brief Internal helper function for _do_dlog()
#
# @param lvl Numeric logging level.
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dtrace(), ddebug(), or others instead which wrap this one.
#
# This function calls _do_dlog() either with parameter msg, or if
# none is given, it will read standard input and will use every line as
# a message.
#
# This enables:
# dwarn "This is a warning"
# echo "This is a warning" | dwarn
dlog() {
[ -z "$maxloglvl" ] && return 0
(( $1 <= $maxloglvl )) || return 0
if (( $# > 1 )); then
_do_dlog "$@"
else
while read line || [ -n "$line" ]; do
_do_dlog "$1" "$line"
done
fi
}
## @brief Logs message at TRACE level (6)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dtrace() {
set +x
dlog 6 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at DEBUG level (5)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
ddebug() {
set +x
dlog 5 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at INFO level (4)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dinfo() {
set +x
dlog 4 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at WARN level (3)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarn() {
set +x
dlog 3 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief It's an alias to dwarn() function.
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarning() {
set +x
dwarn "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at ERROR level (2)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
derror() {
set +x
dlog 2 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at FATAL level (1)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dfatal() {
set +x
dlog 1 "$@"
[ -n "$debug" ] && set -x || :
}
dracut-install 0000755 00000224160 15252504523 0007430 0 ustar 00 ELF > P> @ 0 @ 8 @ ! @ @ @ ! ! p x
!
! D D ! ! Std Ptd 4 4 4 d d Qtd Rtd ! ! P P /lib64/ld-linux-x86-64.so.2 GNU GNU GNU | ),(U. j j l bAPv2 r c 8 D 7 x ? K ! % g # > > Y L j F 9 7 " . I
T = . ` x E T g i n i S 0 ~ S ( $ * ! ! K ! (! \ 0! libkmod.so.2 __gmon_start__ _ITM_deregisterTMCloneTable _ITM_registerTMCloneTable kmod_module_get_module kmod_module_dependency_symbol_get_symbol kmod_get_dirname kmod_unref kmod_module_new_from_loaded kmod_module_new_from_lookup kmod_module_get_name kmod_module_get_softdeps kmod_list_next kmod_module_info_get_key kmod_module_unref_list kmod_module_get_info kmod_module_info_free_list kmod_module_get_dependency_symbols kmod_module_unref kmod_module_get_dependencies kmod_module_dependency_symbols_free_list kmod_module_get_path kmod_module_new_from_path kmod_module_info_get_value kmod_module_symbol_get_symbol kmod_new libgcc_s.so.1 _Unwind_Resume __gcc_personality_v0 libc.so.6 __xpg_basename strcpy __printf_chk fopen strncmp optind regexec __open64_2 puts fork futimes __stack_chk_fail __lxstat unlink mkdir realloc abort _exit memchr strpbrk popen getpid strspn strdup fts_close isatty feof symlink execlp fgets calloc strlen writev strstr strcspn __errno_location memcmp strndup __fprintf_chk fchown fts_read memcpy fclose __vsnprintf_chk strtoul malloc umask realpath __ctype_b_loc getenv fts_set regcomp optarg ioctl __snprintf_chk getopt_long pclose usleep __getdelim geteuid waitpid strchr program_invocation_short_name qsort __cxa_finalize syscall fts_open __xstat uname strcmp strerror __asprintf_chk __libc_start_main stpcpy sysconf free __progname GCC_3.0 GCC_3.3.1 GLIBC_2.14 GLIBC_2.4 GLIBC_2.7 GLIBC_2.3 GLIBC_2.8 GLIBC_2.3.4 GLIBC_2.2.5 LIBKMOD_22 LIBKMOD_5
p 0 P&y V a_& ^ h ii
s ii
} ii
ii
ti ui "&
j ! 0? ! > ! ! ! ! ! S @! `!
! ! ! " ! + ! 4 ! 8 @! ? `! D ! P ! W ! g ! y ! ! @ ! A ` ! ! ! !
! 9
! E
! J @
! = H
! N P
! T X
! Y `
! ] h
! e p
! l x
! ! ! ! # ! * ! 1 ! ! k (! l 0! m ! ! ! ! ! ! ! ! !
! !
!
!
!
!
! (
! 0
! 8
! @
! H
! P
! X
! `
! h
! p
! x
!
!
!
! !
! "
! $
! %
! &
! '
! (
! )
! +
! ,
! -
! .
! /
! 0 ! 1 ! 2 ! 3 ! 4 ! 5 (! 6 0! 7 8! 8 @! 9 H! : P! ; X! < `! = h! > p! ? x! @ ! A ! B ! C ! D ! E ! F ! G ! H ! I ! J ! K ! L ! M ! N ! O ! P ! Q ! R ! S ! T ! U (! V 0! W 8! X @! Y H! Z P! [ X! \ `! ] h! ^ p! _ x! ` ! a ! b ! c ! d ! e ! f ! g ! h ! i HHy HtH 52 %3 h h h h h h h h q h a h Q h
A h 1 h ! h
h h h h h h h h h h q h a h Q h A h 1 h ! h h h h h! h" h# h$ h% h& h' q h( a h) Q h* A h+ 1 h, ! h- h. h/ h0 h1 h2 h3 h4 h5 h6 h7 q h8 a h9 Q h: A h; 1 h< ! h= h> h? h@ hA hB hC hD hE hF hG q hH a hI Q hJ A hK 1 hL ! hM hN hO hP hQ hR hS hT hU hV hW q hX a hY Q hZ A h[ 1 h\ ! h] h^ h_ h` ha hb hc % D % D % D % D % D % D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D % D % D E1H|$Ht.MtLMtLDH, H HH|$HtLHH|$HH?H<$fH H1HHDH8HHHDž HLHHLLA詁 AtD蛁 LpA IHDž KHE E1E1LHEH}{LsLkH}bHEIH}RHtHLH}9H HHE E1E1HE E1E1uHE E1E1bD躀 HE E1E1E In1gH}H}LH}HH(H HtH1H}HtH}HtHtHHEHtHL1 I1 I I1H}HtKH}Ht=HtH0LH11111111H}Ht
I1 I I1 I1v1o1h1a1Z1S1L1E1>17101)1" HHH HLH_HDžP HPHHtH@HtH3E1LHHt H HHDžP HDžP HDžP sHDžP cHDžP SE10L#HH] HDžP E1BE1:LHH1HH6f D AWAVAUATIUSH(dH%( HD$1t , 1%g i = e L5S L-S LLS =` H tQH== 1vHH HD$ H\$ HH= 1HZ Hu1H= HH IL 1 H
> H5& "d HH5C o H 2H HL ; C H5 Hj 1HHY H H@LLR LLH R H= H H H= H HtPvHH AH= 1 H= H5 H H; Lc- EuLA9}EJ H5 M<H$I?u"AEH$9 AM9u
IDI)݀=N ,$ =< =2 $ I/ O4OdLhH
LLA @ Åt<= u@PH
K MAVL 1H5 a ZY= 1 c HL$dH3 %( H([]A\A]A^A_H= H+ H 8 HH
HL H
g 1 H5H ?a H=( Ht @ HH=i Y Hu
D HH=Y Y Hu
D HpH=1 Y HuH=( SQ H= GQ H= ;Q H=< /H= f H= f O$E11J
LA HI` Lt
= AID94$5M $X 1L H
͝ H5 _ M,$/ LLHe HD$HtL|$1
I M/M M` 1L+ H
Y H5 _
LL A v ŅuMc 1L H
H56 7_ nM $q 1LD H
ܜ H5 _ H|$Te Iٺ L H
ߝ H5DŽ ^ K49 H== 1H1O,E1HHHHVMu IH= LQ HtLH?t$LH= HHO Li! AID9<$7Me 1 H5 L{ MH
՛ ] H5 LH[MZD L
1 L
H
H5 ] \L H$H\L<$1L-f
I I/H AQMIH
AV< H5> 1 8] AZA A[
LH% ÅuVL؆ IAVH
? 1H5 \ _AXdH<$2c La 1 H
H5 \ HL
H
H5s 1r\ L4 H
` H5C D\ z Ls H
7 H H H 1I^HHPTL H
/ H=R H= H H9tH> Ht H=i H5b H)HHH?HHtH Htf D == u+UH= Ht H= Id ] w Ht;SHHHu* HHt</HBu|/tH[f11[f AW1Ҿ AVAUATUSHH H<$H|$ dH%( H$8 1Hi HD$ HD$ HD$( yHIHb HL$Lt$0HL$f D Hxp HD$ H5 Hx(H5 IH[ H¾ LHb L
H!%t DHJHDщ HL)" H|0
uD0 HT$H<$LH\$ Htc H0HIHLHrH= HHJ H|$HcHHuH|$HtLdLHH<$Ht$EÅ Ld$Ll$LM D HD$ LHH$H H= H55| a H~ H= Hy H$ dH3 %( HĐ []A\W LH={ 1J -H5f H=
E} ` H5: H=^ 6 H5 H=* a\ UH5 H=r m )H5b H= A= Z H=6 H H= H H= = u!= t
H=y t 9tntj H=z HHJ ILy 1 H
H5y S H5y H_ H 1Ly H
q 1 H5]y YS HHtH H L
L H
H5 y 1R EL
LJ H
֑ L
L. H
L
Lچ H
L
u L H
k L 1 H
c H5Vx WR ff. fAVAUATUSL$ H H $ L9uH dH%( H$@ 1HHIHD$ HH H1HID IH LWIULD H9v+A8/u%JT-Hf Hz/uIH9u1H|$L Hw # H|$D$ Hw1f D /HHVuDE} HsDE1f /HIVuM A8D 1E1:uHHt2H* IMPH
y H5r 1 L XZHuH $H$ dH3%( HuFHĸ []A\A]A^A_1Կ Lr 1 H
H5Or PL =4 SHu=( uR [ E111HH= uIٺ L H
H5q K 1[ E111HH= tIٺ 1L H
a H5q K 1[Ð UH0r H SHH
dH%( HD$1HH$ H<$H5r HHtHHH 1Hq HoH<$HD$dH3%( u:H[] L $M 1L9 H
H5p J gL)q H
ɉ 1F H5p J H H f D SHHH=> 1Hq +x[ D H5 I1Y L H
H5o I XZ[f UIHAWELp AVAUATI SH0 Hq H
dH%( HE1VH5o HDž I H= XLZ@Ań% EtHH= LL L> I HHH H=Z HH?: H1HHKo 9/LH
Z 1{ HL o H8H{ HH[HH # At
(% = @ 2 = It' = tH1L3 DLuo 1H
D H5m G HM1LXo H
H5m G = _AXt= u H= LDž H0L h H% = R L1c5 H L1 :AŅ Ǿ @1k PLDtKPDt4ML4n H
H5Nl JF HxDHHDž HDž HHEH DZ^ DR^ D A D Lt( Ll H
1 H5k E 1E1H HDH]dH3 %( He[A\A]A^A_]f. Mt 1Lz H
H5k E 1A D IRLz H
j 1 H5j D L A1E LLk 1H
! y H5j D f D HIك8 Lk H
߂ 1 H5Sj OD HH HHHA 1ɺ H` HDL *\ f. {ADžV L H8 1LDxDLk 1H
K H5Vi RC DDuH=* tLE 1Lj H
H5i C fILi 1 H
` H5h B fLhH= HH4 Li H
1 H5h B HDž HA LLi 1H
H57h 3B H Af. 1L&IH E1HHa LL :ADž[ HL 1H
2 HDž HA} /Hg MD 1( LHL
HIH1AV Lh H
H5g A HA[LXr H~Hr= L]E DžumHMLv D AVH
~ H5f @ XZM 1Lg H
~ H5Of P@ A p D HMLv 1AVH
H~ G H5f @ XZf. L( D LL"g 1H
I~ H5e ? (H@5AIٺ 1Lu H
} H5se t? AM 1Lf H
} H5:e ;? W fH1Le
;HL1Lf AVH
c} H5d > AYAZLAe H
9} 1 H5d > ! H5d 1> 8Ld H
| 1 H5`d \> u@VH5Ff L
f j Lqt HH
f AVHf ATH QH5f 1L
e j Le HH
e AVHe ATH I+ I0 I@ I' IM I I2 I | u j I U L C : I % Iff. UHAWAVAUATSHXH} dH%( HE1HE HE 2HEH H}H5d 5HH HM1H} Hd H}H5;e FHHEE HEHEHE @ HP HuH}Hٺ
H~LM 1LAd H
z H5a ; HEH5r HInH H5d LVH- H5d L>H H5d L&H H5d LH H5 d LH H5d LH H5d LH H5 LIH H5c L/ HIDHIH <
L
t Hu L A 11HHIHEpE= HuMZ Loq H
xx 1H5$` %: XZL}H5Cc LHt!@ A 11LLZ H}qLyHHEMIH! HYHI.IHB H:HIHEH HHEH H}LaLI
H=}b LeHH} ME 1H5Sc HL1*V A 11HHI: H5 b LH @ A 11LL LM 1La H
v H5^ 8 M 1Lb H
v H5h^ i8 E D H}HtH*H}EH]dH3 %( He[A\A]A^A_] @ LM\ 1La H
:v H5] 7 f E1LeH}\LTLLH}CMM E1HE E1LMf 1L` H
u H5e] f7 wE1HE sH} 1Aąx H}ILA H/\ 1 h 1H}ILH\ CLX H
p 15 H5YX U2 &LX H
mp 1# H51X -2 s 1LX H
)p 1) H5W 1 LYX H
p 1/ H5W 1 H UHAWAVH AUATSH HdH%( HE1HDž Å< L Mw L0 @ H LyIH LHǹ H5Z uLIILZ 1H
n H5V 0 H P H% H; Dž L({f. H(A 11H H(u.I L!Z H
kn H5NV O0 H(H H; 1MHV LHDž( H & H(L DL(L^V 1H
m H5U / cf ZHHMLg PH
m H5nU 1 h/ XZ1H Ht HMdH3 %( He[A\A]A^A_]ÉHIHI1 AWLRf H
m H5T . ^_1LLU H
l 1 H5T . U H Hff. fUHAWAVAUATSHHdH%( HE1H_ HEIIE1HEHEL=K HE LHHE̿HHp H=a H H=R HB H}Y=ʣ tE111HL~ H57 11HA HAH HE HILGW PH
Yk H5\S 1 HE HE F- H}Y^H}HHAƅ H}HtH}HtHtHӿH}HtLLIHHMdH3 %( D He[A\A]A^A_]f HEHtHfHIL:d PH
ej H5hR 1 b, XZh HUHuH}臾Aƅ H}H}AEDD H}AH70- E1"蛿 I I5 4 I I I @ UHAWAVAUATISH(dH%( HE1HE HE ؼ=I H = LHH H=x H H=i H 1E1H}HtƽH}Ht踽HtH諽HMdH3 %( D He[A\A]A^A_]f D H= HaNIٺ) 1Lkb H
i H5_P `* b H =; HE =% H HILS H
h < HH5O P1) H5o XA 1ZH1HAƅ =e 1ۀ=U L!ILS 1C H
1h H5|O x) 1}HuL$< HE=J I? H L5 f D H}LdIH L耻E111HLI軹uLoHI1 AUL(a H
ag H5N ( _H}AXHt 蟼 Iٺ8 1LBa H
3g H5~N ( 1A ~fE111HH=o
Iٺ$ 1L` H
f H5(N )( + @ L9` H
f 1 H5M ' HE= I MLŻLHILxQ 1@ H
Xf H5M ' LLHHAƅHUHuL詹AƅjH}H}AEAEAFf. HEIMxLk HEIǀ= MKL5| f. H}LIHtL4E111HLIouL#HI1 AUL _ H
e H5sL t& H}Y^H?P5 1AWAL=3 ٹ I颾 Iɾ I I鹾 I鱾 I驾 I顾 I陾 I鑾 H鉾 I I I闾 I钾 } ` I{ Iv Iq Il Ig Ib I] IX IS IU UHAWAVI1AUAATSH H=] dH%( HE1HDžx ~HI3H5N HHQHt
H)H
= 1 E AELhIDE1HHHH`HxHXHhLoN 1H
b H5
J L $ H 뿀=m =_ dAVMLQ 1SH
}W H5> JL
HHHh LQ H
+W H5>> L15 >苫8 H@HtH H蒩H膩HzwATML1Q 1SH
V H5= ^_HhAPM LA H
sV 0H5= 1~ ^_L^B H
IV 1 H5U= Q *= t
Hh LOB H
U H5= L1 貪Lt= H
U 1. H5< "LD= H
U 1( H5< L = H
|U 14 H5< H Hׯ ˯ H H( HŰ H Hѯ H( H) H* H. H) H- H) H* 齯 H8 H3 H/f. D f 1H9Bff. HHtwH HN HF(HtAHA(HF(Ht=HH HNHFHtHAHFHt&HHG tkG HHGHuHOHL( H
T H5S H=@ A H
T H5S H=X ! H
T H5S H=S HHtH HD(HHF HVHHtHrH0HGHF HF(Ht$H Hp G HwtkHf D H Hw H
S H5S H=? Y f H
S H5R H=W 1 H
S H5R H=R H
yS H5R H=R H
YS H5{R H=R ATUSHHt$P H9szJHHrH H[]A\ @ HI * H1H|HH!HGHH耣HtI$X @ HI$f. ɸ Bȉff. ATUSHtGHIH\(Hu# H[HtLH;UuH[]A\f1H[]A\f D H
IR ( H5[Q H=;> USHHtuHH HH>U HHiHΉH )H))Љ}$ tHr H k HH[]ÐHH[]2fH
Q H5P H== H
Q H5P H=U SHwHHt H(HsHu{$ tH H H[f D H[駢 tHu 鷤 ATUHSH=* AĄ Hk H HHX HzH1H Hǂ HH) HHHB HDHHHB HDHB HH*HZDb$[]A\ @ H=܇ HHk1[H]A\f HHk1А SHHt3H? t
1[f HHHHu[f D H
O H5N H=; Htfff. @ HtGUSHHHwHt"HnH HtH謠HsHuHH[] D ff. @ Ht/SHwHHtf. HHsHu[ D AUATUSHH IHHIAU LHiHډH )))HƉHt!L9` EH[]A\A] D A}$ t9H5҅ HtmHHÅ H.LLfH []A\A]f0 膞HHu˸ H
M 6 H5L H=9 A 0 H=\ _Hf. ATUSHtkHHHIU HHiHщH ))H)ȉHtHL`1[]A\LHH[]A\nf D H
M V H53L H=9 f HtgUHSHHHH߉HiH IȉD)D))HHtH@H[] H1[] 1ff. f USHHtaHHHHiHωH )H))HHt HhHHHH[] 1HH[] @ H AWAVIAUIATIHUHSHA$LHiH )))HƉIHtxLA$LHiHH )))LƉHu#LLM/LMwL1H[]A\A]A^A_ú H AWAVIAUIATIHUHSHA$LHiH )))HƉIH LA$LHiHH )))LƉHtI9t HL'LLM/LMwL1H[]A\A]A^A_ø HtwATIUHHSHU HiHωH )H))L#Ht H9XuHH}H[]A\ D [1]A\f 1ff. f HtgHtJHHtAHt,HH HHHDHHtHH
H@ HGHu H1HtH fHH
H H5H H=JH m
ff. f HtWHt:HHt2Ht HH(HHtHH
H@ D HGHu H 1HtH fHH
%H H5G H=G ff. f HtgATIUHHSHU HHiH IȉD)D))LaHt H[H@]A\[1]A\f 1ff. f HtHGHtH@f 1ff. f HtHGHtH f. 1ff. f HtHGHtH@f 1ff. f SHt HwHtH^H[ 1H[Ð SHtHwHt
H H[1H[f HtG 1ff. f HtG f D f USHHtAHt-H^HHt!HSH3Htx H[ Hu1H[]f D H
E v H5[E H=;2 AVAUATUSH IH LvHM I>Mf U HHiH )))IƉ HuEI>AU LHiHΉH )L))Љ!LHMMp[]A\A]A^ H
D H5cD H=C1 f H AVIAUIATIUSH HAU LHiH )))LƉ2H LA$LHiHH )))LƉIHt^HƉLLL1[]A\A]A^f1 D H
C H5cC H=C0 f 뾸f USHHt1HwHH?"HHtHHOx+HH[]ÐH
9C H5B H=/ A H1F @ AVAUATIUSHdH%( HD$1G xHHHtPI1LH$ LHtY @ 1LLHDLcHHuJD H HL$dH3 %( HuH[]A\A]A^f D H薖f D AWAVAUATUSHhdH%( HD$X1= HIL5C L-n) H H5F H耕H\ ; H5fF H1ђHt HhD=x ExfHL4$AD$AD$(AD$8ID$H HD$ H\$谓 LDHD$Ll$ HD$( =HL? =1HL$XdH3 %( uHh[]A\A]A^A_Zf. AWIAVAAUIATUSH( HL$Hl$dH%( H$ 1ĔLL$MH D Hþ HDLƄ$ ID#H$ dH3 %( uH( []A\A]A^A_謔ff. UIH=x S1HHQ R V rH HHx z a S ]v x
謑t[ D 9v [ ff. @ f. ff. ;=u H~ 1f LLHbf H ILL$Ht7)D$P)L$`)T$p)$ )$ )$ )$ )$ dH%( HD$1H$ $( HD$HD$ HD$1;=Cu D$0 ~ HL$dH3 %( u H D HLLff. t S1ۅx[ 3tt [þ H=n? t x-L@ H
A 1I H5P? D ؉_E L? H
LA IH5? 1 Ht \ff. PXL? Hjf. PXH
@ \ H5> H=> Hff. 9u s @ Hff. @ PXL? Hf. Hx/=} H @ H
!@ H5$> H=C> !H
@ H5> H=/> Hs xu s 1H } D r D wHcHl H 1ff. f AUL-sl ATIH=V= US1HdH%( HD$1D$ Mu`I| Ht L|t*HH uHt$LQ xLl$GHT$dH3%( u2H[]A\A]ÐH
> % H5< H=& Տ D H#x81HÐf SH=< HtHHxUH=< HHt H8x[fIL= [H
= H5 < 1vIٺ
1LH= H
= H5; Mf. H6H?UHSHH?HtH @ 裌HH;HuHH[]鉌f 1H? t HH? ufff. @ ATUSHtSHHt;H/IHu#f D Ht"H+HtLH_uH[]A\ 1[H]A\f D H
> H5= H=& AUATUSHHtmHHtUH/Ht=HI貋I D Ht2H+HtLLH|uHLtHH[]A\A]fH1[H]A\A]H
I= , H5n< H=& 1 Htbfff. @ ATUSHtkH{xHIHt=H;HHu Wf. HH;HHt=ˌHE HuLE1[]LA\ 螉HHtIHE L[]A\ Htf1ff. f ATUSH dH%( HD$1HK o1HIH$HNxHL$%f D Hʉ$HHt*HNj$/vHT$HBHD$HHuHʈHH I L謋HH A f. E /w7HUE H:Ht7HtiDHHt]E A/vHUHBHEH:HuJH Ht$dH34%( HuEH []A\f D E1x H(1 @ HHu1 D H Ht$(HT$0HL$8LD$@LL$Ht7)D$P)L$`)T$p)$ )$ )$ )$ )$ dH%( HD$1H$ H$ HD$HD$ D$0 HD$HT$dH3%( uH &f D AUATIUSHH HH UHK|HΆIHt?H} HHu] HH} HHtD蚉HHuLE1HL[]A\A]f kHHtHII<$HuH HL[]A\A] D HH[]A\A]f D AVAUATUHSH HIIjH HW|HڅIHt8H} HHuT @ HH} HHt?誈HHuLE1[]LA\A]A^ L HHtHII<$HuH L[]A\A]A^ @ xHDHHtI []A\A]A^ AWAVAUATUSH(dH%( HD$1H Ll$L|$IHLLHHD$ H 1DLLLHDsx Hu{H藄IHtkLLLHHD$ E H 1! LLLH HtGHt$HIHuLE1THL$dH3 %( LuPH([]A\A]A^A_fIH H
6 H55 H= *L̆ff. AWAVAUATUSH(dH%( HD$1H Ld$Lt$HHD$ LL H 1
DLLDkHk Hu{H*IHtgLLHHD$ ; H 1 f D LLH HtRHt$HM| IHuLE1HL$dH3 %( LuWH([]A\A]A^A_f ID H fH
95 H54 H=< Q 'L\ff. USHHtQH55 HHt.Ht"H,H} Ht? u
HE HH[] D H
y4 . H53 H= AWAVAUATUHSHH HI藂IH Lm I1LMu z I<$HtJ;HHEWHIuH{EHH Hf D LhHHt?Lm Mt6HH9tHLCHο HHtKHf HH[]A\A]A^A_ A L50 " 謀HHHu1ff. f AUIATUSHH HH xHYIHt:H;HHuD @ HH;HHt0+HE HuLE1GHL[]A\A]f LHE HtHE HL[]A\A]f H[]A\A]HL11[]A\A]f. HtWATUHSHHHtMHpAHH諃Ht8DH AT$H HE 1[]A\ 1 D E1뻸 UHHSHHt1HHH\xH[]ÐH߉D$ D$ H[]øf Ht D 1ff. f AVIAUATUSHtdIHtlH IHHuD @ HI $IH] Ht+LH蠁uHH@H] Hu I$ [L]A\A]A^ @ H
0 H560 H= f UHSHHt'H7Ht H H3HtHH HuHH[]ff. f AWIAVAUATUSHHtpIHt~H IHHu"Qf D It2HHW~H] Ht1LV~LHHI5}tHI IH] HuI HL[]A\A]A^A_ @ H
y/ H5 / H= AWAVAUATUSHHHu H= HT H,3HE1 H9v8 A~u AVAHH9u|3 H$H E1H9w8 f D HHHT$H)-HT$HItFHZAH9vwI1HI)LP{H $HDL SDRЉA DRA@ A7ACDSEZDA EZA A AJɅ HH ʈPA HH) HH HH
HH
HH HH HH HH \HHD[DA0Dڃ0 kA00~ 0ExvxrAAHHE D @hL 'HH9 "HH) \H L[]A\A]A^f. E1[]LA\A]A^Ð \HHH D L`oHtI 0' \x HHfPf. H
$ H5 " H= AJ
AJWf D 1 D AVAUATUSH IH HH HH5! HHDHpH3@ @'tUIL-! @" @\ LpHu
IA6@uLH)I$HLu []A\A]A^fSHsHu)H1Cf. ' PHHt HȀ\ux PHHuHH)I$9HHHHM []A\A]A^f A~ 3 AvIFI@ ? CHK! H<\tQ<"tfHBRt\t?"t HuHH)I4$8HHHE H[]A\A]A^ HЀx HP@uHHH) @ 1H[]A\A]A^f. H
a" H5 H= H
A" H5 H= H
!" H5 H= aHHH)I HHH H1ff. f AUATUSHHHHD߀; tC? t>IHHHIZnLHHoIE HHE HH[]A\A] H1H[]A\A] G< v%G<vG<w'@G @G@G f. G<w
@G D f AWIAVIAUAATL%F UH-F SL)HocHt 1 LLDAHH9uH[]A\A]A^A_ff. HH /sys/devices modalias install/dracut-install.c 2 madfhlL:oD:HRp:P:s:S:N: DRACUT_FIRMWARE_PATH DRACUT_FIRMWARE_PATH=%s No SOURCE argument given %s/%s Out of memory! stat(%s) != 0 find_binary(%s) == %s %s/lib/dracut/hostonly-files a %s
dracut_install('%s', '%s') hash hit items for '%s' ERROR: stat '%s': %m '%s' already exists dest dir '%s' does not exist mkdir '%s' '%s' install error lstat '%s': %m ln -s '%s' '%s' ERROR: ln -s '%s' '%s': %m dracut_install ret = %d cp '%s' '%s' Failed to chown %s: %m -fL --sparse=auto --reflink=auto cp --preserve=mode,timestamps cp ret = %d .so Script install: '%s' ERROR: failed to install '%s' ldd %s 2>&1 ldd: '%s' Not a valid dynamic program cannot execute binary file not a dynamic executable loader cannot load itself not regular file cannot read header cannot be preloaded => Lib install: '%s' .so. glibc-hwcaps /lib/fipscheck /lib64/fipscheck /lib/hmaccalc /lib64/hmaccalc %s/.%s.hmac %s/%s.hmac hmac cp '%s' '%s') firmware Firmware %s dracut_install '%s' OK dracut_install '%s' '%s' OK dracut_install '%s' '%s' dracut_install '%s' ERROR /lib/modules/ DRACUT_KERNEL_MODALIASES Handle module '%s' Failed to find module '%s' %s ERROR: installing module '%s' Handling =%s %s/kernel/%s %s/extra/%s %s/updates/%s Skipping %s Ignoring %s Handling %s FTS ERROR: %m .ko .ko.xz .ko.gz Failed to find module '%s' ERROR: installing '%s' PATH is not set DESTROOTDIR Out of memory %s/%d.log resolve_deps('%s') Handle '%s' dracut_install '%s' help version debug verbose ldd resolvelazy optional hostonly all module fips destrootdir logdir mod-filter-path mod-filter-nopath mod-filter-symbol mod-filter-nosymbol mod-filter-noname silent kerneldir firmwaredirs Could not get list of loaded modules: %m. Switching to non-hostonly mode. Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE...
or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST
or: %s -D DESTROOTDIR [OPTION]... -m KERNELMODULE [KERNELMODULE …]
Install SOURCE to DEST in DESTROOTDIR with all needed dependencies.
KERNELMODULE can have the format:
with a leading /
=[/…] like '=drivers/hid'
-D --destrootdir Install all files to DESTROOTDIR as the root
-a --all Install all SOURCE arguments to DESTROOTDIR
-o --optional If SOURCE does not exist, do not fail
-d --dir SOURCE is a directory
-l --ldd Also install shebang executables and libraries
-L --logdir Log files, which were installed from the host to
-R --resolvelazy Only install shebang executables and libraries
for all SOURCE files
-H --hostonly Mark all SOURCE files as hostonly
-f --fips Also install all '.SOURCE.hmac' files
--module,-m Install kernel modules, instead of files
--kerneldir Specify the kernel module directory
--firmwaredirs Specify the firmware directory search path with : separation
--silent Don't display error messages for kernel module install
--modalias Only generate module list from /sys/devices modalias list
-o --optional If kernel module does not exist, do not fail
-p --mod-filter-path Filter kernel modules by path regexp
-P --mod-filter-nopath Exclude kernel modules by path regexp
-s --mod-filter-symbol Filter kernel modules by symbol regexp
-S --mod-filter-nosymbol Exclude kernel modules by symbol regexp
-N --mod-filter-noname Exclude kernel modules by name regexp
-v --verbose Show more output
--debug Show debug output
--version Show package version
-h --help Show this help
Module path filter %s is not a regular expression Module symbol filter %s is not a regular expression Environment variable DRACUT_FIRMWARE_PATH is not set convert_abs_rel(): target '%s' directory has no realpath. Path %s matched exclusion filter Path %s matched inclusion filter Could not open '%s' for writing. Could not append '%s' to logfile '%s': %m hash hit items_failed for '%s' '%s' already exists, but checking for any deps ERROR: failed to create directory '%s' --preserve=mode,xattr,timestamps Failed: cp --reflink=auto --sparse=auto --preserve=mode,xattr,timestamps -fL %s %s Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s you do not have execution permission ERROR: failed to install '%s' for '%s' could not get modinfo from '%s': %s
Possible missing firmware %s for kernel module %s dracut_install '%s' '%s' ERROR dracut_install '%s' is excluded dracut_install '%s' not hostonly kmod_module_get_dependency_symbols failed Module %s: symbol %s matched exclusion filter Module %s: symbol %s matched inclusion filter No symbol or path match for '%s' Adding module '%s' to hostonly module list Failed to lookup modules path '%s': %m Failed to get name for module '%s' 3 Failed to lookup alias '%s': %d Failed to lookup alias '%s': %m Environment DESTROOTDIR or argument -D is not set! Environment DESTROOTDIR or argument -D is set to '/'! Environment DESTROOTDIR or argument -D is set to '%s': %m Could not open %s for logging: %m ERROR: installing '%s' to '%s' 'qrrrqrrrqrprprpsprrrrrrrrrrrrrgprr[prOprqrrrCp7pr+porrorrorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrooyodoHon_entries >= 1 !h->iterate_list_head i hashmap_copy hashmap_move_one hashmap_move hashmap_merge hashmap_iterate_backwards hashmap_iterate hashmap_replace link_entry hash_scan hashmap_put unlink_entry remove_entry hashmap_ensure_allocated dracut-install: /dev/console install/log.c (level & 0x07) == level target >= 0 target < _LOG_TARGET_MAX DRACUT_LOG_TARGET DRACUT_LOG_LEVEL safe null Failed to open /dev/console for logging: %s Successfully opened /dev/console for logging. Assertion '%s' failed at %s:%u, function %s(). Aborting. Code should not be reached '%s' at %s:%u, function %s(). Aborting. Failed to parse log target %s. Ignoring. Failed to parse log level %s. Ignoring. log_target_from_string log_parse_environment log_set_target log_set_max_level log_open_console install/strv.c s || l == 0 i == c strv_parse_nulstr strv_remove_prefix strv_remove strv_split_newlines strv_split_quoted strv_split strv_find_prefix strv_find install/util.c postfix fd >= 0 close_nointr(fd) == 0 ret_u emerg state
alert crit err warning notice info (r = sysconf(_SC_PAGESIZE)) > 0 split_quoted cunescape_length_with_prefix log_level_from_string safe_atou close_nointr_nofail close_nointr endswith page_size ;` ,B |H N O 5O WO` P P Q` :Q Q
R
SP S
]| ^ \^ \b b f j k l m< n ,o L|x l l x ,0
l ̣ ܥ 0 h < L L
̩$
,P
ll
,
0 ,d H L` ܰx \ L0 lD X |@ < | , |L ̸p ܸ ̺ $ ,8 LT p ܻ , , ܽD X , \ ܾ | 4 ! h S d
v l R " o + H 4 a 8 m ? f D D P L W p g P y s S N A 9 E J = N T Y ] e l p @#
! ! o h
! ` x h o o o o o &
! p# # # # # # # # # $ $ $ 0$ @$ P$ `$ p$ $ $ $ $ $ $ $ $ % % % 0% @% P% `% p% % % % % % % % % & & & 0& @& P& `& p& & & & & & & & & ' ' ' 0' @' P' `' p' ' ' ' ' ' ' ' ' ( ( ( 0( @( P( `( p( ( ( ( ( ( ( ( ( ) ) ) 0) @) P) `) p) ) ) ) GA$3a1 @# > GA$3p1113 / GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA* GA!
GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*GOW * GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA$3a1 > % GA$3p1113 Є GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA!
GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA* Є I GA*GOW * GA* GA*GOW *
GA*FORTIFY @? GA+GLIBCXX_ASSERTIONS
GA*FORTIFY Є GA+GLIBCXX_ASSERTIONS dracut-install-049-246.git20260728.el8_10.x86_64.debug * 7zXZ ִF ! t/%g _] ?Eh=ڊ2Nc } M89iCu]E7CX:e5,o=Dy֤
#s؈6ˠYĦ {$s)R
v8poׄxOK X>-[Tա#
y b<יkZˁF, <0 4x33P6ʬ 9M\ p}
!=^yN"#t_;aӹ{l/zsܵLٹ]ҷ́@ (]s0_ [ ]fCQrYm DTO%p6FԎ2>̱b?gz3f|B:=!P[ 0CFF>( DßbQ,4p(0/ĥ![bHFS~Hl aN'l-O1+@eb6/V>t"WGg+|dڨ#t !tgjL&^v5-L ټLؽ|Oƻqhd1Pfxph7 1E6ݲ,k1dӺZ`
ђGD!e3K,@ѐSNE˛v78.sjLi߲U7(uSx̭b#1YoIyKqBCM|0qT
@N|YlYS[*Њ6ȃ,t=FbYNgp_Yg!{i:x - V,m~SIۡ+ 'Xd8 vs]O05iiA e Wvd63IN ؚX>t.]O(|vUP ,bB *n[g~jmSH8O|z{>VI1{
_,
rkO<>ۢp5 Oz;nAp c~9 }liXd4"L96f}
qDeO$-(77IM zmDI#LTKgJn5/ ߺ~
d8,/"ڿ]dž6PLD5V*t==?jЯKȖ6%>`pqwBJmoG{ۿ+q. br`|~Kv|t
7dV ,..S5^[=w}Q p ҩV5 beVAgӟ3EnYwOg'ãjx ̅cE`< V49evl k(OXL5p FNڰ vߎ sR/Ugml=3;;"5뉩XNr <~א B NGH|;Y6C.qC_u[65MU
n'\],rm
lQĵ-['?C59 V
]S hu }/yV[ 1蛼EK2?Z-| <)TT/Ƅ ֶ]YO J $ȱg YZ .shstrtab .interp .note.gnu.property .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rela.dyn .rela.plt .init .plt.sec .text .fini .rodata .eh_frame_hdr .eh_frame .gcc_except_table .tbss .init_array .fini_array .data.rel.ro .dynamic .got .data .bss .gnu.build.attributes .gnu_debuglink .gnu_debugdata & 4 @ @ $ G o h h 4 Q P
Y
a o n o } x x h B ` @# @# `# `# P ) ) @ / / %
0 0 ! 4 4 d @ ! ! ! !
!
! ` ! !
" (a 8 < G 8 V dracut-version.sh 0000644 00000000052 15252504523 0010045 0 ustar 00 DRACUT_VERSION=049-246.git20260728.el8_10
modules.d/03rescue/module-setup.sh 0000755 00000000571 15252504523 0013057 0 ustar 00 #!/bin/bash
# called by dracut
check() {
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple -o ps grep more cat rm strace free showmount \
ping netstat rpcinfo vi scp ping6 ssh \
fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck
}
modules.d/01systemd-initrd/module-setup.sh 0000755 00000003451 15252504523 0014546 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if ! dracut_module_included "systemd"; then
derror "systemd-initrd needs systemd in the initramfs"
return 1
fi
return 0
}
# called by dracut
depends() {
echo "systemd"
}
installkernel() {
return 0
}
# called by dracut
install() {
local _mods
inst_multiple -o \
$systemdsystemunitdir/initrd.target \
$systemdsystemunitdir/initrd-fs.target \
$systemdsystemunitdir/initrd-root-device.target \
$systemdsystemunitdir/initrd-root-fs.target \
$systemdsystemunitdir/initrd-switch-root.target \
$systemdsystemunitdir/initrd-switch-root.service \
$systemdsystemunitdir/initrd-cleanup.service \
$systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
$systemdsystemunitdir/initrd-parse-etc.service
systemctl -q --root "$initdir" set-default initrd.target
local VERSION=""
local PRETTY_NAME=""
if [ -e /etc/os-release ]; then
. /etc/os-release
[[ -n ${VERSION} ]] && VERSION+=" "
[[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" "
fi
NAME=dracut
ID=dracut
VERSION+="dracut-$DRACUT_VERSION"
PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
VERSION_ID=$DRACUT_VERSION
ANSI_COLOR="0;34"
{
echo NAME=\"$NAME\"
echo VERSION=\"$VERSION\"
echo ID=$ID
echo VERSION_ID=$VERSION_ID
echo PRETTY_NAME=\"$PRETTY_NAME\"
echo ANSI_COLOR=\"$ANSI_COLOR\"
} > $initdir/usr/lib/initrd-release
echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
ln -sf initrd-release $initdir/usr/lib/os-release
ln -sf initrd-release $initdir/etc/os-release
}
modules.d/97biosdevname/parse-biosdevname.sh 0000755 00000000465 15252504523 0015065 0 ustar 00 #!/bin/sh
if ! getargbool 1 biosdevname; then
info "biosdevname=0: removing biosdevname network renaming"
udevproperty UDEV_BIOSDEVNAME=
rm -f -- /etc/udev/rules.d/71-biosdevname.rules
else
info "biosdevname=1: activating biosdevname network renaming"
udevproperty UDEV_BIOSDEVNAME=1
fi
modules.d/97biosdevname/module-setup.sh 0000755 00000000437 15252504523 0014103 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ "$mount_needs" ]] && return 1
require_binaries biosdevname || return 1
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple biosdevname
inst_rules 71-biosdevname.rules
}
modules.d/90crypt/crypt-run-generator.sh 0000755 00000001402 15252504523 0014236 0 ustar 00 #!/bin/sh
. /lib/dracut-lib.sh
type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
dev=$1
luks=$2
crypttab_contains "$luks" "$dev" && exit 0
allowdiscards="-"
# parse for allow-discards
if strstr "$(cryptsetup --help)" "allow-discards"; then
if discarduuids=$(getargs "rd.luks.allow-discards"); then
discarduuids=$(str_replace "$discarduuids" 'luks-' '')
if strstr " $discarduuids " " ${luks##luks-}"; then
allowdiscards="discard"
fi
elif getargbool 0 rd.luks.allow-discards; then
allowdiscards="discard"
fi
fi
echo "$luks $dev - timeout=0,$allowdiscards" >> /etc/crypttab
if command -v systemctl >/dev/null; then
systemctl daemon-reload
systemctl start cryptsetup.target
fi
exit 0
modules.d/90crypt/crypt-lib.sh 0000755 00000016743 15252504523 0012232 0 ustar 00 #!/bin/sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
# check if the crypttab contains an entry for a LUKS UUID
crypttab_contains() {
local luks="$1"
local dev="$2"
local l d rest
if [ -f /etc/crypttab ]; then
while read l d rest || [ -n "$l" ]; do
strstr "${l##luks-}" "${luks##luks-}" && return 0
strstr "$d" "${luks##luks-}" && return 0
if [ -n "$dev" ]; then
for _dev in $(devnames $d); do
[ "$dev" -ef "$_dev" ] && return 0
done
fi
if [ -e /etc/block_uuid.map ]; then
# search for line starting with $d
_line=$(sed -n "\,^$d .*$,{p}" /etc/block_uuid.map)
[ -z "$_line" ] && continue
# get second column with uuid
_uuid="$(echo $_line | sed 's,^.* \(.*$\),\1,')"
strstr "$_uuid" "${luks##luks-}" && return 0
fi
done < /etc/crypttab
fi
return 1
}
# ask_for_password
#
# Wraps around plymouth ask-for-password and adds fallback to tty password ask
# if plymouth is not present.
#
# --cmd command
# Command to execute. Required.
# --prompt prompt
# Password prompt. Note that function already adds ':' at the end.
# Recommended.
# --tries n
# How many times repeat command on its failure. Default is 3.
# --ply-[cmd|prompt|tries]
# Command/prompt/tries specific for plymouth password ask only.
# --tty-[cmd|prompt|tries]
# Command/prompt/tries specific for tty password ask only.
# --tty-echo-off
# Turn off input echo before tty command is executed and turn on after.
# It's useful when password is read from stdin.
ask_for_password() {
local cmd; local prompt; local tries=3
local ply_cmd; local ply_prompt; local ply_tries=3
local tty_cmd; local tty_prompt; local tty_tries=3
local ret
while [ $# -gt 0 ]; do
case "$1" in
--cmd) ply_cmd="$2"; tty_cmd="$2"; shift;;
--ply-cmd) ply_cmd="$2"; shift;;
--tty-cmd) tty_cmd="$2"; shift;;
--prompt) ply_prompt="$2"; tty_prompt="$2"; shift;;
--ply-prompt) ply_prompt="$2"; shift;;
--tty-prompt) tty_prompt="$2"; shift;;
--tries) ply_tries="$2"; tty_tries="$2"; shift;;
--ply-tries) ply_tries="$2"; shift;;
--tty-tries) tty_tries="$2"; shift;;
--tty-echo-off) tty_echo_off=yes;;
esac
shift
done
{ flock -s 9;
# Prompt for password with plymouth, if installed and running.
if type plymouth >/dev/null 2>&1 && plymouth --ping 2>/dev/null; then
plymouth ask-for-password \
--prompt "$ply_prompt" --number-of-tries=$ply_tries \
--command="$ply_cmd"
ret=$?
else
if [ "$tty_echo_off" = yes ]; then
stty_orig="$(stty -g)"
stty -echo
fi
local i=1
while [ $i -le $tty_tries ]; do
[ -n "$tty_prompt" ] && \
printf "$tty_prompt [$i/$tty_tries]:" >&2
eval "$tty_cmd" && ret=0 && break
ret=$?
i=$(($i+1))
[ -n "$tty_prompt" ] && printf '\n' >&2
done
[ "$tty_echo_off" = yes ] && stty $stty_orig
fi
} 9>/.console_lock
[ $ret -ne 0 ] && echo "Wrong password" >&2
return $ret
}
# Try to mount specified device (by path, by UUID or by label) and check
# the path with 'test'.
#
# example:
# test_dev -f LABEL="nice label" /some/file1
test_dev() {
local test_op=$1; local dev="$2"; local f="$3"
local ret=1; local mount_point=$(mkuniqdir /mnt testdev)
local path
[ -n "$dev" -a -n "$*" ] || return 1
[ -d "$mount_point" ] || die 'Mount point does not exist!'
if mount -r "$dev" "$mount_point" >/dev/null 2>&1; then
test $test_op "${mount_point}/${f}"
ret=$?
umount "$mount_point"
fi
rmdir "$mount_point"
return $ret
}
# match_dev devpattern dev
#
# Returns true if 'dev' matches 'devpattern'. Both 'devpattern' and 'dev' are
# expanded to kernel names and then compared. If name of 'dev' is on list of
# names of devices matching 'devpattern', the test is positive. 'dev' and
# 'devpattern' may be anything which function 'devnames' recognizes.
#
# If 'devpattern' is empty or '*' then function just returns true.
#
# Example:
# match_dev UUID=123 /dev/dm-1
# Returns true if /dev/dm-1 UUID starts with "123".
match_dev() {
[ -z "$1" -o "$1" = '*' ] && return 0
local devlist; local dev
devlist="$(devnames "$1")" || return 255
dev="$(devnames "$2")" || return 255
strstr "
$devlist
" "
$dev
"
}
# getkey keysfile for_dev
#
# Reads file produced by probe-keydev and looks for first line to
# which device matches. The successful result is printed in format
# ":". When nothing found, just false is returned.
#
# Example:
# getkey /tmp/luks.keys /dev/sdb1
# May print:
# /dev/sdc1:/keys/some.key
getkey() {
local keys_file="$1"; local for_dev="$2"
local luks_dev; local key_dev; local key_path
[ -z "$keys_file" -o -z "$for_dev" ] && die 'getkey: wrong usage!'
[ -f "$keys_file" ] || return 1
local IFS=:
while read luks_dev key_dev key_path || [ -n "$luks_dev" ]; do
if match_dev "$luks_dev" "$for_dev"; then
echo "${key_dev}:${key_path}"
return 0
fi
done < "$keys_file"
return 1
}
# readkey keypath keydev device
#
# Mounts , reads key from file , optionally processes it (e.g.
# if encrypted with GPG) and prints to standard output which is supposed to be
# read by cryptsetup. is just passed to helper function for
# informational purpose.
readkey() {
local keypath="$1"
local keydev="$2"
local device="$3"
# No mounting needed if the keyfile resides inside the initrd
if [ "/" == "$keydev" ]; then
local mntp=/
else
# This creates a unique single mountpoint for *, or several for explicitly
# given LUKS devices. It accomplishes unlocking multiple LUKS devices with
# a single password entry.
local mntp="/mnt/$(str_replace "keydev-$keydev-$keypath" '/' '-')"
if [ ! -d "$mntp" ]; then
mkdir "$mntp"
mount -r "$keydev" "$mntp" || die 'Mounting rem. dev. failed!'
fi
fi
case "${keypath##*.}" in
gpg)
if [ -f /lib/dracut-crypt-gpg-lib.sh ]; then
. /lib/dracut-crypt-gpg-lib.sh
gpg_decrypt "$mntp" "$keypath" "$keydev" "$device"
else
die "No GPG support to decrypt '$keypath' on '$keydev'."
fi
;;
img)
if [ -f /lib/dracut-crypt-loop-lib.sh ]; then
. /lib/dracut-crypt-loop-lib.sh
loop_decrypt "$mntp" "$keypath" "$keydev" "$device"
printf "%s\n" "umount \"$mntp\"; rmdir \"$mntp\";" > ${hookdir}/cleanup/"crypt-loop-cleanup-99-${mntp##*/}".sh
return 0
else
die "No loop file support to decrypt '$keypath' on '$keydev'."
fi
;;
*) cat "$mntp/$keypath" ;;
esac
# No unmounting if the keyfile resides inside the initrd
if [ "/" != "$keydev" ]; then
# General unmounting mechanism, modules doing custom cleanup should return earlier
# and install a pre-pivot cleanup hook
umount "$mntp"
rmdir "$mntp"
fi
}
modules.d/90crypt/parse-crypt.sh 0000755 00000015741 15252504523 0012573 0 ustar 00 #!/bin/sh
type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
_cryptgetargsname() {
debug_off
local _o _found _key
unset _o
unset _found
CMDLINE=$(getcmdline)
_key="$1"
set --
for _o in $CMDLINE; do
if [ "$_o" = "$_key" ]; then
_found=1;
elif [ "${_o%=*}" = "${_key%=}" ]; then
[ -n "${_o%=*}" ] && set -- "$@" "${_o#*=}";
_found=1;
fi
done
if [ -n "$_found" ]; then
[ $# -gt 0 ] && printf '%s' "$*"
return 0
fi
return 1;
}
if ! getargbool 1 rd.luks -d -n rd_NO_LUKS; then
info "rd.luks=0: removing cryptoluks activation"
rm -f -- /etc/udev/rules.d/70-luks.rules
else
{
echo 'SUBSYSTEM!="block", GOTO="luks_end"'
echo 'ACTION!="add|change", GOTO="luks_end"'
} > /etc/udev/rules.d/70-luks.rules.new
PARTUUID=$(getargs rd.luks.partuuid -d rd_LUKS_PARTUUID)
SERIAL=$(getargs rd.luks.serial -d rd_LUKS_SERIAL)
LUKS=$(getargs rd.luks.uuid -d rd_LUKS_UUID)
tout=$(getarg rd.luks.key.tout)
if [ -e /etc/crypttab ]; then
while read -r _ _dev _ || [ -n "$_dev" ]; do
set_systemd_timeout_for_dev "$_dev"
done < /etc/crypttab
fi
if [ -n "$PARTUUID" ]; then
for uuid in $PARTUUID; do
uuid=${uuid##luks-}
if luksname=$(_cryptgetargsname "rd.luks.name=$uuid="); then
luksname="${luksname#$uuid=}"
else
luksname="luks-$uuid"
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_PART_ENTRY_UUID}=="*%s*", ' "$uuid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)"
printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
luksname=$(dev_unit_name "$luksname")
luksname="$(str_replace "$luksname" '\' '\\')"
if ! crypttab_contains "$uuid"; then
{
printf -- 'ENV{ID_PART_ENTRY_UUID}=="*%s*", ' "$uuid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)"
printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
done
elif [ -n "$SERIAL" ]; then
for serialid in $SERIAL; do
serialid=${serialid##luks-}
if luksname=$(_cryptgetargsname "rd.luks.name=$serialid="); then
luksname="${luksname#$serialid=}"
else
luksname="luks-$serialid"
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_SERIAL_SHORT}=="*%s*", ' "$serialid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)"
printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
luksname=$(dev_unit_name "$luksname")
luksname="$(str_replace "$luksname" '\' '\\')"
if ! crypttab_contains "$serialid"; then
{
printf -- 'ENV{ID_SERIAL_SHORT}=="*%s*", ' "$serialid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)"
printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
done
elif [ -n "$LUKS" ]; then
for luksid in $LUKS; do
luksid=${luksid##luks-}
if luksname=$(_cryptgetargsname "rd.luks.name=$luksid="); then
luksname="${luksname#$luksid=}"
else
luksname="luks-$luksid"
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
printf -- 'ENV{ID_FS_UUID}=="*%s*", ' "$luksid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)"
printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
luksname=$(dev_unit_name "$luksname")
luksname="$(str_replace "$luksname" '\' '\\')"
if ! crypttab_contains "$luksid"; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
printf -- 'ENV{ID_FS_UUID}=="*%s*", ' "$luksid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)"
printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
uuid=$luksid
while [ "$uuid" != "${uuid#*-}" ]; do uuid=${uuid%%-*}${uuid#*-}; done
printf -- '[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*%s*-* ] || exit 1\n' $uuid \
>> "$hookdir/initqueue/finished/90-crypt.sh"
{
printf -- '[ -e /dev/disk/by-uuid/*%s* ] || ' $luksid
printf -- 'warn "crypto LUKS UUID "%s" not found"\n' $luksid
} >> "$hookdir/emergency/90-crypt.sh"
done
elif getargbool 0 rd.auto; then
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' "$(command -v initqueue)"
printf -- '--unique --settled --onetime --name cryptroot-ask-%%k '
printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' "$(command -v cryptroot-ask)" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' "$(command -v initqueue)"
printf -- '--unique --settled --onetime --name crypt-run-generator-%%k '
printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID}"\n' "$(command -v crypt-run-generator)"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
echo 'LABEL="luks_end"' >> /etc/udev/rules.d/70-luks.rules.new
mv /etc/udev/rules.d/70-luks.rules.new /etc/udev/rules.d/70-luks.rules
fi
modules.d/90crypt/crypt-cleanup.sh 0000755 00000000672 15252504523 0013105 0 ustar 00 #!/bin/sh
# close everything which is not busy
rm -f -- /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
if ! getarg rd.luks.uuid -d rd_LUKS_UUID >/dev/null 2>&1 && getargbool 1 rd.luks -d -n rd_NO_LUKS >/dev/null 2>&1; then
while true; do
local do_break="y"
for i in /dev/mapper/luks-*; do
cryptsetup luksClose $i >/dev/null 2>&1 && do_break=n
done
[ "$do_break" = "y" ] && break
done
fi
modules.d/90crypt/probe-keydev.sh 0000755 00000000576 15252504523 0012716 0 ustar 00 #!/bin/sh
. /lib/dracut-crypt-lib.sh
real_keydev="$1"; keypath="$2"; luksdev="$3"
[ -z "$real_keydev" -o -z "$keypath" ] && die 'probe-keydev: wrong usage!'
[ -z "$luksdev" ] && luksdev='*'
info "Probing $real_keydev for $keypath..."
test_dev -f "$real_keydev" "$keypath" || exit 1
info "Found $keypath on $real_keydev"
echo "$luksdev:$real_keydev:$keypath" >> /tmp/luks.keys
modules.d/90crypt/parse-keydev.sh 0000755 00000002541 15252504523 0012713 0 ustar 00 #!/bin/sh
if getargbool 1 rd.luks -n rd_NO_LUKS && \
[ -n "$(getarg rd.luks.key)" ]; then
exec 7>/etc/udev/rules.d/65-luks-keydev.rules
echo 'SUBSYSTEM!="block", GOTO="luks_keydev_end"' >&7
echo 'ACTION!="add|change", GOTO="luks_keydev_end"' >&7
for arg in $(getargs rd.luks.key); do
unset keypath keydev luksdev
splitsep : "$arg" keypath keydev luksdev
info "rd.luks.key: keypath='$keypath' keydev='$keydev' luksdev='$luksdev'"
if [ -z "$keypath" ]; then
warn 'keypath required!'
continue
fi
# A keydev of '/' is treated as the initrd itself
if [ "/" == "$keydev" ]; then
[ -z "$luksdev" ] && luksdev='*'
echo "$luksdev:$keydev:$keypath" >> /tmp/luks.keys
continue
elif [ -n "$keydev" ]; then
udevmatch "$keydev" >&7 || {
warn 'keydev incorrect!'
continue
}
printf ', ' >&7
fi
{
printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
printf -- '--name probe-keydev-%%k '
printf -- '%s /dev/%%k %s %s"\n' \
$(command -v probe-keydev) "${keypath}" "${luksdev}"
} >&7
done
unset arg keypath keydev luksdev
echo 'LABEL="luks_keydev_end"' >&7
exec 7>&-
fi
modules.d/90crypt/cryptroot-ask.sh 0000755 00000011406 15252504523 0013135 0 ustar 00 #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
NEWROOT=${NEWROOT:-"/sysroot"}
# do not ask, if we already have root
[ -f $NEWROOT/proc ] && exit 0
. /lib/dracut-lib.sh
# if device name is /dev/dm-X, convert to /dev/mapper/name
if [ "${1##/dev/dm-}" != "$1" ]; then
device="/dev/mapper/$(dmsetup info -c --noheadings -o name "$1")"
else
device="$1"
fi
# default luksname - luks-UUID
luksname=$2
# number of tries
numtries=${3:-10}
# TODO: improve to support what cmdline does
if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; then
while read name dev luksfile luksoptions || [ -n "$name" ]; do
# ignore blank lines and comments
if [ -z "$name" -o "${name#\#}" != "$name" ]; then
continue
fi
# PARTUUID used in crypttab
if [ "${dev%%=*}" = "PARTUUID" ]; then
if [ "luks-${dev##PARTUUID=}" = "$luksname" ]; then
luksname="$name"
break
fi
# UUID used in crypttab
elif [ "${dev%%=*}" = "UUID" ]; then
if [ "luks-${dev##UUID=}" = "$luksname" ]; then
luksname="$name"
break
fi
# ID used in crypttab
elif [ "${dev%%=*}" = "ID" ]; then
if [ "luks-${dev##ID=}" = "$luksname" ]; then
luksname="$name"
break
fi
# path used in crypttab
else
cdev=$(readlink -f $dev)
mdev=$(readlink -f $device)
if [ "$cdev" = "$mdev" ]; then
luksname="$name"
break
fi
fi
done < /etc/crypttab
unset name dev
fi
# check if destination already exists
[ -b /dev/mapper/$luksname ] && exit 0
# we already asked for this device
asked_file=/tmp/cryptroot-asked-$luksname
[ -f $asked_file ] && exit 0
# load dm_crypt if it is not already loaded
[ -d /sys/module/dm_crypt ] || modprobe dm_crypt
. /lib/dracut-crypt-lib.sh
#
# Open LUKS device
#
info "luksOpen $device $luksname $luksfile $luksoptions"
OLD_IFS="$IFS"
IFS=,
set -- $luksoptions
IFS="$OLD_IFS"
while [ $# -gt 0 ]; do
case $1 in
noauto)
# skip this
exit 0
;;
swap)
# skip this
exit 0
;;
tmp)
# skip this
exit 0
;;
allow-discards)
allowdiscards="--allow-discards"
;;
header=*)
cryptsetupopts="${cryptsetupopts} --${1}"
;;
esac
shift
done
# parse for allow-discards
if strstr "$(cryptsetup --help)" "allow-discards"; then
if discarduuids=$(getargs "rd.luks.allow-discards"); then
discarduuids=$(str_replace "$discarduuids" 'luks-' '')
if strstr " $discarduuids " " ${luksdev##luks-}"; then
allowdiscards="--allow-discards"
fi
elif getargbool 0 rd.luks.allow-discards; then
allowdiscards="--allow-discards"
fi
fi
if strstr "$(cryptsetup --help)" "allow-discards"; then
cryptsetupopts="$cryptsetupopts $allowdiscards"
fi
unset allowdiscards
# fallback to passphrase
ask_passphrase=1
if [ -n "$luksfile" -a "$luksfile" != "none" -a -e "$luksfile" ]; then
if cryptsetup --key-file "$luksfile" $cryptsetupopts luksOpen "$device" "$luksname"; then
ask_passphrase=0
fi
else
while [ -n "$(getarg rd.luks.key)" ]; do
if tmp=$(getkey /tmp/luks.keys $device); then
keydev="${tmp%%:*}"
keypath="${tmp#*:}"
else
if [ $numtries -eq 0 ]; then
warn "No key found for $device. Fallback to passphrase mode."
break
fi
sleep 1
info "No key found for $device. Will try $numtries time(s) more later."
initqueue --unique --onetime --settled \
--name cryptroot-ask-$luksname \
$(command -v cryptroot-ask) "$device" "$luksname" "$(($numtries-1))"
exit 0
fi
unset tmp
info "Using '$keypath' on '$keydev'"
readkey "$keypath" "$keydev" "$device" \
| cryptsetup -d - $cryptsetupopts luksOpen "$device" "$luksname"
unset keypath keydev
ask_passphrase=0
break
done
fi
if [ $ask_passphrase -ne 0 ]; then
luks_open="$(command -v cryptsetup) $cryptsetupopts luksOpen"
_timeout=$(getargs "rd.luks.timeout")
_timeout=${_timeout:-0}
ask_for_password --ply-tries 5 \
--ply-cmd "$luks_open -T1 $device $luksname" \
--ply-prompt "Password ($device)" \
--tty-tries 1 \
--tty-cmd "$luks_open -T5 -t $_timeout $device $luksname"
unset luks_open
unset _timeout
fi
unset device luksname luksfile
# mark device as asked
>> $asked_file
need_shutdown
udevsettle
exit 0
modules.d/90crypt/module-setup.sh 0000755 00000011154 15252504523 0012737 0 ustar 00 #!/bin/bash
# called by dracut
check() {
local _rootdev
# if cryptsetup is not installed, then we cannot support encrypted devices.
require_any_binary $systemdutildir/systemd-cryptsetup cryptsetup || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs = "crypto_LUKS" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
echo dm rootfs-block
return 0
}
# called by dracut
installkernel() {
hostonly="" instmods drbg
arch=$(arch)
[[ $arch == x86_64 ]] && arch=x86
[[ $arch == s390x ]] && arch=s390
instmods dm_crypt =crypto =drivers/crypto =arch/$arch/crypto
}
# called by dracut
cmdline() {
local dev UUID
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != "crypto_LUKS" ]] && continue
UUID=$(
blkid -u crypto -o export $dev \
| while read line || [ -n "$line" ]; do
[[ ${line#UUID} = $line ]] && continue
printf "%s" "${line#UUID=}"
break
done
)
[[ ${UUID} ]] || continue
printf "%s" " rd.luks.uuid=luks-${UUID}"
done
}
# called by dracut
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
local _cryptconf=$(cmdline)
[[ $_cryptconf ]] && printf "%s\n" "$_cryptconf" >> "${initdir}/etc/cmdline.d/90crypt.conf"
fi
inst_hook cmdline 30 "$moddir/parse-crypt.sh"
if ! dracut_module_included "systemd"; then
inst_multiple cryptsetup rmdir readlink umount
inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
inst_script "$moddir"/probe-keydev.sh /sbin/probe-keydev
inst_hook cmdline 10 "$moddir/parse-keydev.sh"
inst_hook cleanup 30 "$moddir/crypt-cleanup.sh"
fi
if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
# filter /etc/crypttab for the devices we need
while read _mapper _dev _luksfile _luksoptions || [ -n "$_mapper" ]; do
[[ $_mapper = \#* ]] && continue
[[ $_dev ]] || continue
[[ $_dev == PARTUUID=* ]] && \
_dev="/dev/disk/by-partuuid/${_dev#PARTUUID=}"
[[ $_dev == UUID=* ]] && \
_dev="/dev/disk/by-uuid/${_dev#UUID=}"
[[ $_dev == ID=* ]] && \
_dev="/dev/disk/by-id/${_dev#ID=}"
echo "$_dev $(blkid $_dev -s UUID -o value)" >> "${initdir}/etc/block_uuid.map"
# loop through the options to check for the force option
luksoptions=${_luksoptions}
OLD_IFS="${IFS}"
IFS=,
set -- ${luksoptions}
IFS="${OLD_IFS}"
while [ $# -gt 0 ]; do
case $1 in
force)
forceentry="yes"
break
;;
esac
shift
done
# include the entry regardless
if [ "${forceentry}" = "yes" ]; then
echo "$_mapper $_dev $_luksfile $_luksoptions"
else
for _hdev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$_hdev]} == "crypto_LUKS" ]] || continue
if [[ $_hdev -ef $_dev ]] || [[ /dev/block/$_hdev -ef $_dev ]]; then
echo "$_mapper $_dev $_luksfile $_luksoptions"
break
fi
done
fi
done < /etc/crypttab > $initdir/etc/crypttab
mark_hostonly /etc/crypttab
fi
inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
if dracut_module_included "systemd"; then
# the cryptsetup targets are already pulled in by 00systemd, but not
# the enablement symlinks
inst_multiple -o \
$systemdutildir/system-generators/systemd-cryptsetup-generator \
$systemdutildir/systemd-cryptsetup \
$systemdsystemunitdir/systemd-ask-password-console.path \
$systemdsystemunitdir/systemd-ask-password-console.service \
$systemdsystemunitdir/cryptsetup.target \
$systemdsystemunitdir/sysinit.target.wants/cryptsetup.target \
$systemdsystemunitdir/remote-cryptsetup.target \
$systemdsystemunitdir/initrd-root-device.target.wants/remote-cryptsetup.target \
systemd-ask-password systemd-tty-ask-password-agent
inst_script "$moddir"/crypt-run-generator.sh /sbin/crypt-run-generator
fi
dracut_need_initqueue
}
modules.d/90kernel-network-modules/module-setup.sh 0000755 00000002614 15252504523 0016214 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
# Include wired net drivers, excluding wireless
local _arch=$(uname -m)
local _net_symbols='eth_type_trans|register_virtio_device|usbnet_open'
local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
local _net_drivers
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/s390/net"
fi
if [[ $hostonly_mode == 'strict' ]] && [[ -n ${hostonly_nics+x} ]]; then
for _nic in $hostonly_nics; do
_net_drivers=$(get_dev_module /sys/class/net/$_nic)
if ! [[ $_net_drivers ]]; then
derror "--hostonly-nics contains invalid NIC '$_nic'"
continue
fi
hostonly="" instmods $_net_drivers
done
return 0
fi
dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/net"
#instmods() will take care of hostonly
instmods \
=drivers/net/phy \
=drivers/net/team \
=drivers/net/ethernet \
ecb arc4 bridge stp llc ipv6 bonding 8021q ipvlan macvlan af_packet virtio_net xennet
hostonly="" instmods iscsi_ibft crc32c iscsi_boot_sysfs
}
# called by dracut
install() {
return 0
}
modules.d/04watchdog-modules/module-setup.sh 0000755 00000003623 15252504523 0015041 0 ustar 00 #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
return 0
}
installkernel() {
local -A _drivers
local _alldrivers _wdtdrv _wdtppath _dir
[[ -d /sys/class/watchdog/ ]] || return
for _dir in /sys/class/watchdog/*; do
[[ -d "$_dir" ]] || continue
[[ -f "$_dir/state" ]] || continue
# device/modalias will return driver of this device
_wdtdrv=$(< "$_dir/device/modalias")
# There can be more than one module represented by same
# modalias. Currently load all of them.
# TODO: Need to find a way to avoid any unwanted module
# represented by modalias
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
# however in some cases, we also need to check that if there is
# a specific driver for the parent bus/device. In such cases
# we also need to enable driver for parent bus/device.
_wdtppath=$(readlink -f "$_dir/device")
while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do
_wdtppath=$(readlink -f "$_wdtppath/..")
[[ -f "$_wdtppath/modalias" ]] || continue
_wdtdrv=$(< "$_wdtppath/modalias")
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
done
done
# ensure that watchdog module is loaded as early as possible
_alldrivers="${!_drivers[*]}"
[[ $_alldrivers ]] && echo "rd.driver.pre=${_alldrivers// /,}" > ${initdir}/etc/cmdline.d/00-watchdog.conf
return 0
}
modules.d/98dracut-systemd/dracut-mount.sh 0000755 00000002034 15252504523 0014552 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
i=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
i=$(($i+1))
[ $i -gt 20 ] && emergency_shell "Can't mount root filesystem"
done
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-pre-pivot.service.8.asc 0000644 00000000655 15252504523 0017302 0 ustar 00 DRACUT-PRE-PIVOT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-pivot.service - runs the dracut hooks before switching root
SYNOPSIS
--------
dracut-pre-pivot.service
DESCRIPTION
-----------
This service runs all dracut hooks before the system switched to the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-initqueue.service 0000644 00000001465 15252504523 0016452 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut initqueue hook
Documentation=man:dracut-initqueue.service(8)
DefaultDependencies=no
Before=remote-fs-pre.target
Wants=remote-fs-pre.target
After=systemd-udev-trigger.service
Wants=systemd-udev-trigger.service
ConditionPathExists=/usr/lib/initrd-release
ConditionPathExists=|/lib/dracut/need-initqueue
ConditionKernelCommandLine=|rd.break=initqueue
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-initqueue
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-cmdline.service 0000644 00000001610 15252504523 0016045 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut cmdline hook
Documentation=man:dracut-cmdline.service(8)
DefaultDependencies=no
Before=dracut-pre-udev.service
After=systemd-journald.socket
Wants=systemd-journald.socket
ConditionPathExists=/usr/lib/initrd-release
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline
ConditionKernelCommandLine=|rd.break=cmdline
ConditionKernelCommandLine=|resume
ConditionKernelCommandLine=|noresume
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-mount.service 0000644 00000001466 15252504523 0016371 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-mount hook
Documentation=man:dracut-pre-mount.service(8)
DefaultDependencies=no
Before=initrd-root-fs.target sysroot.mount systemd-fsck-root.service
After=dracut-initqueue.service cryptsetup.target
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-mount
ConditionKernelCommandLine=|rd.break=pre-mount
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-mount.sh 0000755 00000000766 15252504523 0015350 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-mount' 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-emergency.sh 0000755 00000002546 15252504523 0015376 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
type plymouth >/dev/null 2>&1 && plymouth quit
export _rdshell_name="dracut" action="Boot" hook="emergency"
_emergency_action=$(getarg rd.emergency)
if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
FSTXT="/run/dracut/fsck/fsck_help_$fstype.txt"
source_hook "$hook"
echo
rdsosreport
echo
echo
echo 'Entering emergency mode. Exit the shell to continue.'
echo 'Type "journalctl" to view system logs.'
echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
echo 'after mounting them and attach it to a bug report.'
echo
echo
[ -f "$FSTXT" ] && cat "$FSTXT"
[ -f /etc/profile ] && . /etc/profile
[ -z "$PS1" ] && export PS1="$_name:\${PWD}# "
exec sh -i -l
else
export hook="shutdown-emergency"
warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
source_hook "$hook"
[ -z "$_emergency_action" ] && _emergency_action=halt
fi
/bin/rm -f -- /.console_lock
case "$_emergency_action" in
reboot)
reboot || exit 1;;
poweroff)
poweroff || exit 1;;
halt)
halt || exit 1;;
esac
exit 0
modules.d/98dracut-systemd/dracut-pre-udev.service.8.asc 0000644 00000000650 15252504523 0017077 0 ustar 00 DRACUT-PRE-UDEV.SERVICE(8)
==========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-udev.service - runs the dracut hooks before udevd is started
SYNOPSIS
--------
dracut-pre-udev.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is started in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-mount.service.8 0000644 00000002773 15252504523 0015755 0 ustar 00 '\" t
.\" Title: dracut-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-MOUNT\&.SERV" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-mount.service \- runs the dracut hooks after /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks after the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-shutdown-onfailure.service 0000644 00000000465 15252504523 0020276 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Service executing upon dracut-shutdown failure to perform cleanup
Documentation=man:dracut-shutdown.service(8)
DefaultDependencies=no
[Service]
Type=oneshot
ExecStart=-/bin/rm /run/initramfs/shutdown
StandardError=null
modules.d/98dracut-systemd/dracut-cmdline-ask.service 0000644 00000001517 15252504523 0016627 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut ask for additional cmdline parameters
DefaultDependencies=no
Before=dracut-cmdline.service
After=systemd-journald.socket
After=systemd-vconsole-setup.service
Requires=systemd-vconsole-setup.service
Wants=systemd-journald.socket
ConditionPathExists=/usr/lib/initrd-release
ConditionKernelCommandLine=|rd.cmdline=ask
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline-ask
StandardInput=tty
StandardOutput=inherit
StandardError=inherit
RemainAfterExit=yes
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-pivot.sh 0000755 00000001577 15252504523 0015350 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-pivot' 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
_bv=$(getarg rd.break -d rdbreak) && [ -z "$_bv" ] &&
emergency_shell -n switch_root "Break before switch_root"
unset _bv
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
[ -h /dev/nfs ] && rm -f -- /dev/nfs
exit 0
modules.d/98dracut-systemd/dracut-pre-trigger.service.8.asc 0000644 00000000670 15252504523 0017601 0 ustar 00 DRACUT-PRE-TRIGGER.SERVICE(8)
=============================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-trigger.service - runs the dracut hooks before udevd is triggered
SYNOPSIS
--------
dracut-pre-trigger.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is triggered in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-pre-trigger.service 0000644 00000001622 15252504523 0016664 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-trigger hook
Documentation=man:dracut-pre-trigger.service(8)
DefaultDependencies=no
Before=systemd-udev-trigger.service dracut-initqueue.service
After=dracut-pre-udev.service systemd-udevd.service systemd-tmpfiles-setup-dev.service
Wants=dracut-pre-udev.service systemd-udevd.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-trigger
ConditionKernelCommandLine=|rd.break=pre-trigger
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-trigger
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-udev.service.8 0000644 00000003001 15252504523 0016323 0 ustar 00 '\" t
.\" Title: dracut-pre-udev.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-UDEV\&." "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-udev.service \- runs the dracut hooks before udevd is started
.SH "SYNOPSIS"
.sp
dracut\-pre\-udev\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is started in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-shutdown.service.8.asc 0000644 00000003530 15252504523 0017223 0 ustar 00 DRACUT-SHUTDOWN.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-shutdown.service - unpack the initramfs to /run/initramfs
SYNOPSIS
--------
dracut-shutdown.service
DESCRIPTION
-----------
This service unpacks the initramfs image to /run/initramfs.
systemd pivots into /run/initramfs at shutdown, so the root filesystem
can be safely unmounted.
The following steps are executed during a shutdown:
* systemd switches to the shutdown.target
* systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
* dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore which unpacks the initramfs to /run/initramfs
* systemd finishes shutdown.target
* systemd kills all processes
* systemd tries to unmount everything and mounts the remaining read-only
* systemd checks, if there is a /run/initramfs/shutdown executable
* if yes, it does a pivot_root to /run/initramfs and executes ./shutdown. The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
* shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
This ensures, that all devices are disassembled and unmounted cleanly.
To debug the shutdown process, you can get a shell in the shutdown procedure
by injecting "rd.break=pre-shutdown rd.shell" or "rd.break=shutdown rd.shell".
----
# mkdir -p /run/initramfs/etc/cmdline.d
# echo "rd.break=pre-shutdown rd.shell" > /run/initramfs/etc/cmdline.d/debug.conf
# touch /run/initramfs/.need_shutdown
----
In case the unpack of the initramfs fails, dracut-shutdown-onfailure.service
executes to make sure switch root doesn't happen, since it would result in
switching to an incomplete initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut*(8)
modules.d/98dracut-systemd/dracut-pre-trigger.sh 0000755 00000000723 15252504523 0015642 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
source_hook pre-trigger
getarg 'rd.break=pre-trigger' 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break pre-trigger"
udevadm control --reload >/dev/null 2>&1 || :
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-initqueue.service.8.asc 0000644 00000000667 15252504523 0017370 0 ustar 00 DRACUT-INITQUEUE.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-initqueue.service - runs the dracut main loop to find the real root
SYNOPSIS
--------
dracut-initqueue.service
DESCRIPTION
-----------
This service runs all the main loop of dracut in the initramfs to find the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-initqueue.service.8 0000644 00000003016 15252504523 0016612 0 ustar 00 '\" t
.\" Title: dracut-initqueue.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-INITQUEUE\&." "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-initqueue.service \- runs the dracut main loop to find the real root
.SH "SYNOPSIS"
.sp
dracut\-initqueue\&.service
.SH "DESCRIPTION"
.sp
This service runs all the main loop of dracut in the initramfs to find the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-pre-udev.sh 0000755 00000002605 15252504523 0015143 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-udev' 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break pre-udev"
source_hook pre-udev
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
unset i
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-pre-pivot.service 0000644 00000002145 15252504523 0016363 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-pivot and cleanup hook
Documentation=man:dracut-pre-pivot.service(8)
DefaultDependencies=no
After=initrd.target initrd-parse-etc.service sysroot.mount
After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service
Before=initrd-cleanup.service
Wants=remote-fs.target
After=remote-fs.target
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-pivot
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cleanup
ConditionKernelCommandLine=|rd.break=pre-pivot
ConditionKernelCommandLine=|rd.break=cleanup
ConditionKernelCommandLine=|rd.break
ConditionPathExists=|/dev/root
ConditionPathExists=|/dev/nfs
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-pivot
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-mount.service 0000644 00000001431 15252504523 0015575 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut mount hook
Documentation=man:dracut-mount.service(8)
After=initrd-root-fs.target initrd-parse-etc.service
After=dracut-initqueue.service dracut-pre-mount.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/mount
ConditionKernelCommandLine=|rd.break=mount
DefaultDependencies=no
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-mount.service.8 0000644 00000003012 15252504523 0016524 0 ustar 00 '\" t
.\" Title: dracut-pre-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-MOUNT\&" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-mount.service \- runs the dracut hooks before /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-pre\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-mount.service.8.asc 0000644 00000000640 15252504523 0016511 0 ustar 00 DRACUT-MOUNT.SERVICE(8)
=======================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-mount.service - runs the dracut hooks after /sysroot is mounted
SYNOPSIS
--------
dracut-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks after the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-pre-udev.service 0000644 00000001741 15252504523 0016166 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-udev hook
Documentation=man:dracut-pre-udev.service(8)
DefaultDependencies=no
Before=systemd-udevd.service dracut-pre-trigger.service
After=dracut-cmdline.service
Wants=dracut-cmdline.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-udev
ConditionKernelCommandLine=|rd.break=pre-udev
ConditionKernelCommandLine=|rd.driver.blacklist
ConditionKernelCommandLine=|rd.driver.pre
ConditionKernelCommandLine=|rd.driver.post
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-udev
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-cmdline.service.8.asc 0000644 00000000672 15252504523 0016767 0 ustar 00 DRACUT-CMDLINE.SERVICE(8)
=========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-cmdline.service - runs the dracut hooks to parse the kernel command line
SYNOPSIS
--------
dracut-cmdline.service
DESCRIPTION
-----------
This service runs all the dracut hooks to parse the kernel command line in
the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/dracut-pre-pivot.service.8 0000644 00000003005 15252504523 0016525 0 ustar 00 '\" t
.\" Title: dracut-pre-pivot.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-PIVOT\&" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-pivot.service \- runs the dracut hooks before switching root
.SH "SYNOPSIS"
.sp
dracut\-pre\-pivot\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the system switched to the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-shutdown.service.8 0000644 00000007345 15252504523 0016466 0 ustar 00 '\" t
.\" Title: dracut-shutdown.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 08/13/2026
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-SHUTDOWN\&.S" "8" "08/13/2026" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-shutdown.service \- unpack the initramfs to /run/initramfs
.SH "SYNOPSIS"
.sp
dracut\-shutdown\&.service
.SH "DESCRIPTION"
.sp
This service unpacks the initramfs image to /run/initramfs\&. systemd pivots into /run/initramfs at shutdown, so the root filesystem can be safely unmounted\&.
.sp
The following steps are executed during a shutdown:
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd switches to the shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd starts /lib/systemd/system/shutdown\&.target\&.wants/dracut\-shutdown\&.service
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
dracut\-shutdown\&.service executes /usr/lib/dracut/dracut\-initramfs\-restore which unpacks the initramfs to /run/initramfs
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd finishes shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd kills all processes
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd tries to unmount everything and mounts the remaining read\-only
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd checks, if there is a /run/initramfs/shutdown executable
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if yes, it does a pivot_root to /run/initramfs and executes \&./shutdown\&. The old root is then mounted on /oldroot\&. /usr/lib/dracut/modules\&.d/99shutdown/shutdown\&.sh is the shutdown executable\&.
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
.RE
.sp
This ensures, that all devices are disassembled and unmounted cleanly\&.
.sp
To debug the shutdown process, you can get a shell in the shutdown procedure by injecting "rd\&.break=pre\-shutdown rd\&.shell" or "rd\&.break=shutdown rd\&.shell"\&.
.sp
.if n \{\
.RS 4
.\}
.nf
# mkdir \-p /run/initramfs/etc/cmdline\&.d
# echo "rd\&.break=pre\-shutdown rd\&.shell" > /run/initramfs/etc/cmdline\&.d/debug\&.conf
# touch /run/initramfs/\&.need_shutdown
.fi
.if n \{\
.RE
.\}
.sp
In case the unpack of the initramfs fails, dracut\-shutdown\-onfailure\&.service executes to make sure switch root doesn\(cqt happen, since it would result in switching to an incomplete initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\fR(8)
modules.d/98dracut-systemd/emergency.service 0000644 00000001264 15252504523 0015135 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
Conflicts=shutdown.target
Before=shutdown.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=/bin/dracut-emergency
ExecStopPost=-/usr/bin/systemctl --fail --no-block default
Type=idle
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TasksMax=infinity
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-pre-mount.service.8.asc 0000644 00000000662 15252504523 0017301 0 ustar 00 DRACUT-PRE-MOUNT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-mount.service - runs the dracut hooks before /sysroot is mounted
SYNOPSIS
--------
dracut-pre-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks before the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
modules.d/98dracut-systemd/rootfs-generator.sh 0000755 00000010070 15252504523 0015427 0 ustar 00 #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
generator_wait_for_dev()
{
local _name
local _timeout
_name="$(str_replace "$1" '/' '\x2f')"
_timeout=$(getarg rd.timeout)
_timeout=${_timeout:-0}
if ! [ -e "$hookdir/initqueue/finished/devexists-${_name}.sh" ]; then
# If a LUKS device needs unlocking via systemd in the initrd, assume
# it's for the root device. In that case, don't block on it if it's
# after remote-fs-pre.target since the initqueue is ordered before it so
# it will never actually show up (think Tang-pinned rootfs).
cat > "$hookdir/initqueue/finished/devexists-${_name}.sh" << EOF
if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then
[ -e "$1" ]
fi
EOF
{
printf '[ -e "%s" ] || ' $1
printf 'warn "\"%s\" does not exist"\n' $1
} >> "$hookdir/emergency/80-${_name}.sh"
fi
_name=$(dev_unit_name "$1")
if ! [ -L "$GENERATOR_DIR"/initrd.target.wants/${_name}.device ]; then
[ -d "$GENERATOR_DIR"/initrd.target.wants ] || mkdir -p "$GENERATOR_DIR"/initrd.target.wants
ln -s ../${_name}.device "$GENERATOR_DIR"/initrd.target.wants/${_name}.device
fi
if ! [ -f "$GENERATOR_DIR"/${_name}.device.d/timeout.conf ]; then
mkdir -p "$GENERATOR_DIR"/${_name}.device.d
{
echo "[Unit]"
echo "JobTimeoutSec=$_timeout"
echo "JobRunningTimeoutSec=$_timeout"
} > "$GENERATOR_DIR"/${_name}.device.d/timeout.conf
fi
}
generator_mount_rootfs()
{
local _type=$2
local _flags=$3
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d "$GENERATOR_DIR" ] || mkdir -p "$GENERATOR_DIR"
if ! [ -f "$GENERATOR_DIR"/sysroot.mount ]; then
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "Requires=systemd-fsck@${_name}.service"
echo "After=systemd-fsck@${_name}.service"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=$1"
echo "Options=${_flags}"
echo "Type=${_type}"
} > "$GENERATOR_DIR"/sysroot.mount
fi
if ! [ -L "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount ]; then
[ -d "$GENERATOR_DIR"/initrd-root-fs.target.requires ] || mkdir -p "$GENERATOR_DIR"/initrd-root-fs.target.requires
ln -s ../sysroot.mount "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount
fi
}
generator_fsck_after_pre_mount()
{
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d /run/systemd/generator/systemd-fsck@${_name}.service.d ] || mkdir -p /run/systemd/generator/systemd-fsck@${_name}.service.d
if ! [ -f /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf ]; then
{
echo "[Unit]"
echo "After=dracut-pre-mount.service"
} > /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf
fi
}
root=$(getarg root=)
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/nfs) # ignore legacy /dev/nfs
;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
GENERATOR_DIR="$1"
if [ "$rootok" = "1" ]; then
generator_wait_for_dev "${root#block:}" "$RDRETRY"
generator_fsck_after_pre_mount "${root#block:}"
strstr "$(cat /proc/cmdline)" 'root=' || generator_mount_rootfs "${root#block:}" "$(getarg rootfstype=)" "$(getarg rootflags=)"
fi
exit 0
modules.d/98dracut-systemd/dracut-emergency.service 0000644 00000001251 15252504523 0016411 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Dracut Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
Conflicts=shutdown.target emergency.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=-/bin/dracut-emergency
ExecStopPost=-/bin/rm -f -- /.console_lock
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TasksMax=infinity
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
modules.d/98dracut-systemd/dracut-tmpfiles.conf 0000644 00000000207 15252504523 0015543 0 ustar 00 d /run/initramfs 0755 root root -
d /run/initramfs/log 0755 root root -
L /var/log - - - - ../run/initramfs/log
modules.d/98dracut-systemd/dracut-cmdline-ask.sh 0000755 00000000642 15252504523 0015602 0 ustar 00 #!/bin/bash
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
getarg "rd.cmdline=ask" || exit 0
sleep 0.5
echo
sleep 0.5
echo
sleep 0.5
echo
echo
echo
echo
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -e -p "> " line || [ -n "$line" ]; do
[[ "$line" == "." ]] && break
[[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
exit 0
modules.d/98dracut-systemd/module-setup.sh 0000755 00000004030 15252504523 0014551 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if ! dracut_module_included "systemd-initrd"; then
derror "dracut-systemd needs systemd-initrd in the initramfs"
return 1
fi
return 0
}
# called by dracut
depends() {
echo "systemd-initrd"
return 0
}
installkernel() {
return 0
}
# called by dracut
install() {
local _mods
inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask
inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator
mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
for i in \
dracut-cmdline.service \
dracut-cmdline-ask.service \
dracut-initqueue.service \
dracut-mount.service \
dracut-pre-mount.service \
dracut-pre-pivot.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do
inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
systemctl -q --root "$initdir" add-wants initrd.target "$i"
done
inst_simple "$moddir/dracut-tmpfiles.conf" "$tmpfilesdir/dracut-tmpfiles.conf"
}
modules.d/98dracut-systemd/dracut-cmdline.service.8 0000644 00000003023 15252504523 0016213 0 ustar 00 '\" t
.\" Title: dracut-cmdline.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-CMDLINE\&.SE" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-cmdline.service \- runs the dracut hooks to parse the kernel command line
.SH "SYNOPSIS"
.sp
dracut\-cmdline\&.service
.SH "DESCRIPTION"
.sp
This service runs all the dracut hooks to parse the kernel command line in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-pre-trigger.service.8 0000644 00000003016 15252504523 0017031 0 ustar 00 '\" t
.\" Title: dracut-pre-trigger.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-TRIGGER" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-trigger.service \- runs the dracut hooks before udevd is triggered
.SH "SYNOPSIS"
.sp
dracut\-pre\-trigger\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is triggered in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
modules.d/98dracut-systemd/dracut-shutdown.service 0000644 00000000670 15252504523 0016312 0 ustar 00 # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Restore /run/initramfs on shutdown
Documentation=man:dracut-shutdown.service(8)
After=local-fs.target boot.mount boot.automount
Wants=local-fs.target
ConditionPathExists=!/run/initramfs/bin/sh
OnFailure=dracut-shutdown-onfailure.service
[Service]
RemainAfterExit=yes
Type=oneshot
ExecStart=/bin/true
ExecStop=/usr/lib/dracut/dracut-initramfs-restore
modules.d/98dracut-systemd/dracut-initqueue.sh 0000755 00000004143 15252504523 0015423 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevadm settle --exit-if-exists=$hookdir/initqueue/work
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- "$hookdir/initqueue/work"
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
for i in /run/systemd/ask-password/ask.*; do
[ -e "$i" ] && continue 2
done
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
warn "dracut-initqueue timeout - starting timeout scripts"
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
[ $main_loop -eq 0 ] && break
done
fi
main_loop=$(($main_loop+1))
if [ $main_loop -gt $RDRETRY ]; then
if ! [ -f /sysroot/etc/fstab ] || ! [ -e /sysroot/sbin/init ] ; then
emergency_shell "Could not boot."
fi
warn "Not all disks have been found."
warn "You might want to regenerate your initramfs."
break
fi
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
export -p > /dracut-state.sh
exit 0
modules.d/98dracut-systemd/dracut-cmdline.sh 0000755 00000005133 15252504523 0015026 0 ustar 00 #!/bin/sh
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION" ] && info "dracut-$VERSION"
if ! getargbool 1 'rd.hostonly'; then
[ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
remove_hostonly_files
[ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi
info "Using kernel command line parameters:" $(getcmdline)
getargbool 0 rd.udev.log-priority=info -d rd.udev.info -d -n -y rdudevinfo && echo 'udev_log="info"' >> /etc/udev/udev.conf
getargbool 0 rd.udev.log-priority=debug -d rd.udev.debug -d -n -y rdudevdebug && echo 'udev_log="debug"' >> /etc/udev/udev.conf
source_conf /etc/conf.d
# Get the "root=" parameter from the kernel command line, but differentiate
# between the case where it was set to the empty string and the case where it
# wasn't specified at all.
if ! root="$(getarg root=)"; then
root_unset='UNSET'
fi
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
export root
export rflags
export fstype
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
# run scriptlets to parse the command line
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -f /lib/dracut/parse-resume.sh ] && . /lib/dracut/parse-resume.sh
case "${root}${root_unset}" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
UNSET|gpt-auto)
# systemd's gpt-auto-generator handles this case.
rootok=1 ;;
esac
[ -z "${root}${root_unset}" ] && die "Empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
export -p > /dracut-state.sh
exit 0
modules.d/95lunmask/parse-lunmask.sh 0000755 00000002313 15252504523 0013411 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
create_udev_rule() {
local transport=$1
local tgtid=$2
local lun=$3
local _rule=/etc/udev/rules.d/51-${transport}-lunmask-${tgtid}.rules
local _cu_type _dev_type
[ -e ${_rule} ] && return 0
if [ ! -f "$_rule" ] ; then
if [ "$transport" = "fc" ] ; then
cat > $_rule < $_rule < /sys/module/scsi_mod/parameters/scan
elif [ ! -f /etc/modprobe.d/95lunmask.conf ] ; then
echo "options scsi_mod scan=manual" > /etc/modprobe.d/95lunmask.conf
fi
create_udev_rule $1 $2 $3
)
done
modules.d/95lunmask/sas_transport_scan_lun.sh 0000755 00000001070 15252504523 0015412 0 ustar 00 #!/bin/bash
#
# sas_transport_lun_scan
#
# Selectively enable individual LUNs behind a SAS end device
#
# ACTION=="add", SUBSYSTEM=="sas_transport", ATTR{sas_address}=="sas_addr", \
# PROGRAM="sas_transport_lun_scan lun"
#
[ -z $DEVPATH ] && exit 1
if [ -n "$1" ] ; then
LUN=$1
else
LUN=-
fi
ID=${DEVPATH##*/end_device-}
HOST=${ID%%:*}
CHANNEL=${ID%%-*}
CHANNEL=${CHANNEL#*:}
if [ -f /sys$DEVPATH/scsi_target_id ] ; then
TARGET=$(cat /sys$DEVPATH/scsi_target_id)
fi
[ -z "$TARGET" ] && exit 1
echo 0 $TARGET $LUN > /sys/class/scsi_host/host$HOST/scan
modules.d/95lunmask/fc_transport_scan_lun.sh 0000755 00000001062 15252504523 0015215 0 ustar 00 #!/bin/bash
#
# fc_transport_lun_scan
#
# Selectively enable individual LUNs behind an FC remote port
#
# ACTION=="add", SUBSYSTEM=="fc_transport", ATTR{port_name}=="wwpn", \
# PROGRAM="fc_transport_lun_scan lun"
#
[ -z $DEVPATH ] && exit 1
if [ -n "$1" ] ; then
LUN=$1
else
LUN=-
fi
ID=${DEVPATH##*/rport-}
HOST=${ID%%:*}
CHANNEL=${ID%%-*}
CHANNEL=${CHANNEL#*:}
if [ -f /sys$DEVPATH/scsi_target_id ] ; then
TARGET=$(cat /sys$DEVPATH/scsi_target_id)
fi
[ -z "$TARGET" ] && exit 1
echo $CHANNEL $TARGET $LUN > /sys/class/scsi_host/host$HOST/scan
modules.d/95lunmask/module-setup.sh 0000755 00000004316 15252504523 0013257 0 ustar 00 #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# called by dracut
cmdline() {
get_lunmask() {
local _dev=$1
local _devpath=$(cd -P /sys/dev/block/$_dev ; echo $PWD)
local _sdev _lun _rport _end_device _classdev _wwpn _sas_address
[ "${_devpath#*/sd}" == "$_devpath" ] && return 1
_sdev="${_devpath%%/block/*}"
_lun="${_sdev##*:}"
# Check for FibreChannel
_rport="${_devpath##*/rport-}"
if [ "$_rport" != "$_devpath" ] ; then
_rport="${_rport%%/*}"
_classdev="/sys/class/fc_remote_ports/rport-${_rport}"
[ -d "$_classdev" ] || return 1
_wwpn=$(cat ${_classdev}/port_name)
echo "rd.lunmask=fc,${_wwpn},${_lun}"
return 0
fi
# Check for SAS
_end_device="${_devpath##*/end_device-}"
if [ "$_end_device" != "$_devpath" ] ; then
_end_device="${_end_device%%/*}"
_classdev="/sys/class/sas_device/end_device-${_end_device}"
[ -e "$_classdev" ] || return 1
_sas_address=$(cat ${_classdev}/sas_address)
echo "rd.lunmask=sas,${_sas_address},${_lun}"
return 0
fi
return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all get_lunmask
} | sort | uniq
}
# called by dracut
check() {
[[ $hostonly ]] || [[ $mount_needs ]] && {
[ -w /sys/module/scsi_mod/parameters/scan ] || return 255
scan_type=$(cat /sys/module/scsi_mod/parameters/scan)
[ "$scan_type" = "manual" ] && return 0
return 255
}
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_script "$moddir/fc_transport_scan_lun.sh" /usr/lib/udev/fc_transport_scan_lun.sh
inst_script "$moddir/sas_transport_scan_lun.sh" /usr/lib/udev/sas_transport_scan_lun.sh
inst_hook cmdline 30 "$moddir/parse-lunmask.sh"
if [[ $hostonly_cmdline == "yes" ]] ; then
local _lunmask
for _lunmask in $(cmdline) ; do
printf "%s\n" "$_lunmask" >> "${initdir}/etc/cmdline.d/95lunmask.conf"
done
fi
}
modules.d/30convertfs/do-convertfs.sh 0000755 00000000302 15252504523 0013560 0 ustar 00 #!/bin/bash
if getargbool 0 rd.convertfs; then
if getargbool 0 rd.debug; then
bash -x convertfs "$NEWROOT" 2>&1 | vinfo
else
convertfs "$NEWROOT" 2>&1 | vinfo
fi
fi
modules.d/30convertfs/convertfs.sh 0000755 00000013623 15252504523 0013172 0 ustar 00 #!/bin/bash
ROOT="$1"
if [[ ! -d "$ROOT" ]]; then
echo "Usage: $0 "
exit 1
fi
if [[ "$ROOT" -ef / ]]; then
echo "Can't convert the running system."
echo "Please boot with 'rd.convertfs' on the kernel command line,"
echo "to update with the help of the initramfs,"
echo "or run this script from a rescue system."
exit 1
fi
while [[ "$ROOT" != "${ROOT%/}" ]]; do
ROOT=${ROOT%/}
done
if [ ! -L $ROOT/var/run -a -e $ROOT/var/run ]; then
echo "Converting /var/run to symlink"
mv -f $ROOT/var/run $ROOT/var/run.runmove~
ln -sfn ../run $ROOT/var/run
fi
if [ ! -L $ROOT/var/lock -a -e $ROOT/var/lock ]; then
echo "Converting /var/lock to symlink"
mv -f $ROOT/var/lock $ROOT/var/lock.lockmove~
ln -sfn ../run/lock $ROOT/var/lock
fi
needconvert() {
for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64"; do
if [[ -e "$dir" ]]; then
[[ -L "$dir" ]] || return 0
fi
done
return 1
}
if ! [ -e "$ROOT/usr/bin" ]; then
echo "$ROOT/usr/bin does not exist!"
echo "Make sure, the kernel command line has enough information"
echo "to mount /usr (man dracut.cmdline)"
exit 1
fi
if ! needconvert; then
echo "Your system is already converted."
exit 0
fi
testfile="$ROOT/.usrmovecheck$$"
rm -f -- "$testfile"
> "$testfile"
if [[ ! -e "$testfile" ]]; then
echo "Cannot write to $ROOT/"
exit 1
fi
rm -f -- "$testfile"
testfile="$ROOT/usr/.usrmovecheck$$"
rm -f -- "$testfile"
> "$testfile"
if [[ ! -e "$testfile" ]]; then
echo "Cannot write to $ROOT/usr/"
exit 1
fi
rm -f -- "$testfile"
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc || [ -n "$dev" ]; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted
# usage: ismounted /dev/
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a || [ -n "$m" ]; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# clean up after ourselves no matter how we die.
cleanup() {
echo "Something failed. Move back to the original state"
for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \
"$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \
"$ROOT/usr/lib64"; do
[[ -d "${dir}.usrmove-new" ]] && rm -fr -- "${dir}.usrmove-new"
if [[ -d "${dir}.usrmove-old" ]]; then
mv "$dir" "${dir}.del~"
mv "${dir}.usrmove-old" "$dir"
rm -fr -- "${dir}.del~"
fi
done
}
trap 'ret=$?; [[ $ret -ne 0 ]] && cleanup;exit $ret;' EXIT
trap 'exit 1;' SIGINT
ismounted "$ROOT/usr" || CP_HARDLINK="-l"
set -e
# merge / and /usr in new dir in /usr
for dir in bin sbin lib lib64; do
rm -rf -- "$ROOT/usr/${dir}.usrmove-new"
[[ -L "$ROOT/$dir" ]] && continue
[[ -d "$ROOT/$dir" ]] || continue
echo "Make a copy of \`$ROOT/usr/$dir'."
[[ -d "$ROOT/usr/$dir" ]] \
&& cp -ax -l "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-new"
echo "Merge the copy with \`$ROOT/$dir'."
[[ -d "$ROOT/usr/${dir}.usrmove-new" ]] \
|| mkdir -p "$ROOT/usr/${dir}.usrmove-new"
cp -axT $CP_HARDLINK --backup --suffix=.usrmove~ "$ROOT/$dir" "$ROOT/usr/${dir}.usrmove-new"
echo "Clean up duplicates in \`$ROOT/usr/$dir'."
# delete all symlinks that have been backed up
find "$ROOT/usr/${dir}.usrmove-new" -type l -name '*.usrmove~' -delete || :
# replace symlink with backed up binary
find "$ROOT/usr/${dir}.usrmove-new" \
-name '*.usrmove~' \
-type f \
-exec bash -c 'p="{}";o=${p%%%%.usrmove~};
[[ -L "$o" ]] && mv -f "$p" "$o"' ';' || :
done
# switch over merged dirs in /usr
for dir in bin sbin lib lib64; do
[[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue
echo "Switch to new \`$ROOT/usr/$dir'."
rm -fr -- "$ROOT/usr/${dir}.usrmove-old"
mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old"
mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir"
done
# replace dirs in / with links to /usr
for dir in bin sbin lib lib64; do
[[ -L "$ROOT/$dir" ]] && continue
[[ -d "$ROOT/$dir" ]] || continue
echo "Create \`$ROOT/$dir' symlink."
rm -fr -- "$ROOT/${dir}.usrmove-old" || :
mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old"
ln -sfn usr/$dir "$ROOT/$dir"
done
echo "Clean up backup files."
# everything seems to work; cleanup
for dir in bin sbin lib lib64; do
# if we get killed in the middle of "rm -rf", ensure not to leave
# an incomplete directory, which is moved back by cleanup()
[[ -d "$ROOT/usr/${dir}.usrmove-old" ]] \
&& mv "$ROOT/usr/${dir}.usrmove-old" "$ROOT/usr/${dir}.usrmove-old~"
[[ -d "$ROOT/${dir}.usrmove-old" ]] \
&& mv "$ROOT/${dir}.usrmove-old" "$ROOT/${dir}.usrmove-old~"
done
for dir in bin sbin lib lib64; do
[[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \
&& rm -rf -- "$ROOT/usr/${dir}.usrmove-old~" || :
[[ -d "$ROOT/${dir}.usrmove-old~" ]] \
&& rm -rf -- "$ROOT/${dir}.usrmove-old~" || :
done
for dir in lib lib64; do
[[ -d "$ROOT/$dir" ]] || continue
for lib in "$ROOT"/usr/${dir}/lib*.so*.usrmove~; do
[[ -f $lib ]] || continue
mv $lib ${lib/.so/_so}
done
done
set +e
echo "Run ldconfig."
ldconfig -r "$ROOT"
. $ROOT/etc/selinux/config
if [ -n "$(command -v setfiles)" ] && [ "$SELINUX" != "disabled" ] && [ -f /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts ]; then
echo "Fixing SELinux labels"
setfiles -r $ROOT -p /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts $ROOT/sbin $ROOT/bin $ROOT/lib $ROOT/lib64 $ROOT/usr/lib $ROOT/usr/lib64 $ROOT/etc/ld.so.cache $ROOT/var/cache/ldconfig || :
fi
echo "Done."
exit 0
modules.d/30convertfs/module-setup.sh 0000755 00000000520 15252504523 0013574 0 ustar 00 #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple bash find ldconfig mv rm cp ln
inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
inst_script "$moddir/convertfs.sh" /usr/bin/convertfs
}
modules.d/00bash/module-setup.sh 0000755 00000000551 15252504523 0012501 0 ustar 00 #!/bin/bash
# called by dracut
check() {
require_binaries /bin/bash
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
# If another shell is already installed, do not use bash
[[ -x $initdir/bin/sh ]] && return
# Prefer bash as /bin/sh if it is available.
inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
}
modules.d/95fcoe/stop-fcoe.sh 0000755 00000000157 15252504523 0011774 0 ustar 00 #!/bin/bash
for f in /sys/bus/fcoe/devices/ctlr_* ; do
[ -e $f ] || continue
echo 0 > $f/enabled
done
modules.d/95fcoe/parse-fcoe.sh 0000755 00000003766 15252504523 0012132 0 ustar 00 #!/bin/sh
#
# Supported formats:
# fcoe=::
# fcoe=::
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# fcoe=eth0:nodcb:vn2vn
# fcoe=4a:3f:4c:04:f8:d7:nodcb:fabric
if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then
info "rd.fcoe=0: skipping fcoe"
return 0
fi
[ -z "$fcoe" ] && fcoe=$(getarg fcoe=)
# If it's not set we don't continue
[ -z "$fcoe" ] && return
[ -e /sys/bus/fcoe/ctlr_create ] || modprobe -b -a fcoe || modprobe -b -a libfcoe || die "FCoE requested but kernel/initrd does not support FCoE"
initqueue --onetime modprobe -b -q bnx2fc
parse_fcoe_opts() {
local OLDIFS="$IFS"
local IFS=:
set $fcoe
IFS="$OLDIFS"
case $# in
2)
fcoe_interface=$1
fcoe_dcb=$2
fcoe_mode="fabric"
return 0
;;
3)
fcoe_interface=$1
fcoe_dcb=$2
fcoe_mode=$3
return 0
;;
7)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
fcoe_mode="fabric"
return 0
;;
8)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
fcoe_mode=$8
return 0
;;
*)
warn "Invalid arguments for fcoe=$fcoe"
return 1
;;
esac
}
parse_fcoe_opts
if [ "$fcoe_interface" = "edd" ]; then
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
/sbin/initqueue --settled --unique /sbin/fcoe-edd $fcoe_dcb
else
for fcoe in $(getargs fcoe=); do
unset fcoe_mac
unset fcoe_interface
parse_fcoe_opts
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
. $(command -v fcoe-genrules.sh)
done
fi
modules.d/95fcoe/fcoe-up.sh 0000755 00000004743 15252504523 0011440 0 ustar 00 #!/bin/sh
#
# We get called like this:
# fcoe-up
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# Huh? Missing arguments ??
[ -z "$1" -o -z "$2" ] && exit 1
netif=$1
dcb=$2
mode=$3
vlan="yes"
iflink=$(cat /sys/class/net/$netif/iflink)
ifindex=$(cat /sys/class/net/$netif/ifindex)
if [ "$iflink" != "$ifindex" ] ; then
# Skip VLAN devices
exit 0
fi
ip link set dev $netif up
linkup "$netif"
# Some fcoemon implementations expect --syslog=true
syslogopt="--syslog"
if fcoemon -h|grep syslog|grep -q yes; then
fcoemonyes="$syslogopt=yes"
fi
netdriver=$(readlink -f /sys/class/net/$netif/device/driver)
netdriver=${netdriver##*/}
write_fcoemon_cfg() {
[ -f /etc/fcoe/cfg-$netif ] && return
echo FCOE_ENABLE=\"yes\" > /etc/fcoe/cfg-$netif
if [ "$dcb" = "dcb" ]; then
echo DCB_REQUIRED=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo DCB_REQUIRED=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$vlan" = "yes" ]; then
echo AUTO_VLAN=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo AUTO_VLAN=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$mode" = "vn2vn" ] ; then
echo MODE=\"vn2vn\" >> /etc/fcoe/cfg-$netif
else
echo MODE=\"fabric\" >> /etc/fcoe/cfg-$netif
fi
}
if [ "$netdriver" = "bnx2x" ]; then
# If driver is bnx2x, do not use /sys/module/fcoe/parameters/create but fipvlan
modprobe 8021q
udevadm settle --timeout=30
# Sleep for 13 s to allow dcb negotiation
sleep 13
fipvlan "$netif" -c -s
need_shutdown
exit
fi
if [ "$dcb" = "dcb" ]; then
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" dcb on && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" pfc e:1 a:1 w:1 && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" app:fcoe e:1 a:1 w:1 && break
info "Retrying to turn fcoe on"
sleep 1
i=$(($i+1))
done
sleep 1
fi
write_fcoemon_cfg
fcoemon $syslogopt
need_shutdown
modules.d/95fcoe/fcoe-genrules.sh 0000755 00000002264 15252504523 0012634 0 ustar 00 #!/bin/sh
# We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh
# If neither mac nor interface are set we don't continue
[ -z "$fcoe_interface" -a -z "$fcoe_mac" ] && return
# Write udev rules
{
if [ -n "$fcoe_mac" ] ; then
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode"
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode"
else
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode"
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode"
fi
} >> /etc/udev/rules.d/92-fcoe.rules
modules.d/95fcoe/fcoe-edd.sh 0000755 00000002212 15252504523 0011535 0 ustar 00 #!/bin/sh
dcb="$1"
_modprobe_r_edd="0"
check_edd() {
local cnt=0
[ -d /sys/firmware/edd ] && return 0
_modprobe_r_edd="1"
modprobe edd || return $?
while [ $cnt -lt 600 ]; do
[ -d /sys/firmware/edd ] && return 0
cnt=$(($cnt+1))
sleep 0.1
done
return 1
}
check_edd || exit 1
for disk in /sys/firmware/edd/int13_*; do
[ -d "$disk" ] || continue
if [ -e "${disk}/pci_dev/driver" ]; then
driver=$(readlink "${disk}/pci_dev/driver")
driver=${driver##*/}
fi
# i40e uses dev_port 1 for a virtual fcoe function
if [ "${driver}" = "i40e" ]; then
dev_port=1
fi
for nic in "${disk}"/pci_dev/net/*; do
[ -d "$nic" ] || continue
if [ -n "${dev_port}" -a -e "${nic}/dev_port" ]; then
if [ "$(cat ${nic}/dev_port)" -ne "${dev_port}" ]; then
continue
fi
fi
if [ -e ${nic}/address ]; then
fcoe_interface=${nic##*/}
if ! [ -e "/tmp/.fcoe-$fcoe_interface" ]; then
/sbin/fcoe-up "$fcoe_interface" "$dcb"
> "/tmp/.fcoe-$fcoe_interface"
fi
fi
done
done
[ "$_modprobe_r_edd" = "1" ] && modprobe -r edd
unset _modprobe_r_edd
modules.d/95fcoe/cleanup-fcoe.sh 0000755 00000001040 15252504523 0012426 0 ustar 00 #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /var/run/lldpad.pid ]; then
lldpad -k
# with systemd version 230, this is not necessary anymore
# systemd commit cacf980ed44a28e276a6cc7f8fc41f991e2ab354
if [ -z "$DRACUT_SYSTEMD" ]; then
mkdir -m 0755 -p /run/initramfs/state/dev/shm
cp /dev/shm/lldpad.state /run/initramfs/state/dev/shm/ > /dev/null 2>&1
echo "files /dev/shm/lldpad.state" >> /run/initramfs/rwtab
fi
fi
modules.d/95fcoe/module-setup.sh 0000755 00000006534 15252504523 0012525 0 ustar 00 #!/bin/bash
# called by dracut
check() {
is_fcoe() {
block_is_fcoe $1 || return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_fcoe || return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink fcoemon fcoeadm || return 1
return 0
}
# called by dracut
depends() {
echo network rootfs-block
return 0
}
# called by dracut
installkernel() {
instmods fcoe libfcoe 8021q edd bnx2fc
}
get_vlan_parent() {
local link=$1
[ -d $link ] || return
read iflink < $link/iflink
for if in /sys/class/net/* ; do
read idx < $if/ifindex
if [ $idx -eq $iflink ] ; then
echo ${if##*/}
fi
done
}
# called by dracut
cmdline() {
{
for c in /sys/bus/fcoe/devices/ctlr_* ; do
[ -L $c ] || continue
read enabled < $c/enabled
read mode < $c/mode
[ $enabled -eq 0 ] && continue
if [ $mode = "VN2VN" ] ; then
mode="vn2vn"
else
mode="fabric"
fi
d=$(cd -P $c; echo $PWD)
i=${d%/*}
ifname=${i##*/}
read mac < ${i}/address
s=$(dcbtool gc ${i##*/} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
if [ -z "$s" ] ; then
p=$(get_vlan_parent ${i})
if [ "$p" ] ; then
s=$(dcbtool gc ${p} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
ifname=${p##*/}
fi
fi
if [ "$s" = "on" ] ; then
dcb="dcb"
else
dcb="nodcb"
fi
# Some Combined Network Adapters(CNAs) implement DCB in firmware.
# Do not run software-based DCB or LLDP on CNAs that implement DCB.
# If the network interface provides hardware DCB/DCBX capabilities,
# DCB_REQUIRED in "/etc/fcoe/cfg-xxx" is expected to set to "no".
#
# Force "nodcb" if there's any DCB_REQUIRED="no"(child or vlan parent).
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${i##*/} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
if [ "$p" ] ; then
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${p} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
fi
echo "ifname=${ifname}:${mac}"
echo "fcoe=${ifname}:${dcb}:${mode}"
done
} | sort | uniq
}
# called by dracut
install() {
inst_multiple ip dcbtool fipvlan lldpad readlink lldptool fcoemon fcoeadm
if [ -e "/etc/hba.conf" ]; then
inst_libdir_file 'libhbalinux.so*'
inst_simple "/etc/hba.conf"
fi
mkdir -m 0755 -p "$initdir/var/lib/lldpad"
mkdir -m 0755 -p "$initdir/etc/fcoe"
if [[ $hostonly_cmdline == "yes" ]] ; then
local _fcoeconf=$(cmdline)
[[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf"
fi
inst_multiple /etc/fcoe/cfg-*
inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up"
inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd"
inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh"
inst_hook pre-trigger 03 "$moddir/lldpad.sh"
inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
inst_hook cleanup 90 "$moddir/cleanup-fcoe.sh"
inst_hook shutdown 40 "$moddir/stop-fcoe.sh"
dracut_need_initqueue
}
modules.d/95fcoe/lldpad.sh 0000755 00000000730 15252504523 0011332 0 ustar 00 #!/bin/bash
if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then
info "rd.fcoe=0: skipping lldpad activation"
return 0
fi
# Note lldpad will stay running after switchroot, the system initscripts
# are to kill it and start a new lldpad to take over. Data is transfered
# between the 2 using a shm segment
lldpad -d
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
modules.d/99base/init.sh 0000755 00000027025 15252504523 0011045 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer
# Jeremy Katz
export -p > /tmp/export.orig
NEWROOT="/sysroot"
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
OLDPATH=$PATH
PATH=/usr/sbin:/usr/bin:/sbin:/bin
export PATH
# mount some important things
[ ! -d /proc/self ] && \
mount -t proc -o nosuid,noexec,nodev proc /proc >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount proc on /proc! Compile the kernel with CONFIG_PROC_FS!"
exit 1
fi
[ ! -d /sys/kernel ] && \
mount -t sysfs -o nosuid,noexec,nodev sysfs /sys >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount sysfs on /sys! Compile the kernel with CONFIG_SYSFS!"
exit 1
fi
RD_DEBUG=""
. /lib/dracut-lib.sh
setdebug
if ! ismounted /dev; then
mount -t devtmpfs -o mode=0755,noexec,nosuid,strictatime devtmpfs /dev >/dev/null
fi
if ! ismounted /dev; then
echo "Cannot mount devtmpfs on /dev! Compile the kernel with CONFIG_DEVTMPFS!"
exit 1
fi
# prepare the /dev directory
[ ! -h /dev/fd ] && ln -s /proc/self/fd /dev/fd >/dev/null 2>&1
[ ! -h /dev/stdin ] && ln -s /proc/self/fd/0 /dev/stdin >/dev/null 2>&1
[ ! -h /dev/stdout ] && ln -s /proc/self/fd/1 /dev/stdout >/dev/null 2>&1
[ ! -h /dev/stderr ] && ln -s /proc/self/fd/2 /dev/stderr >/dev/null 2>&1
if ! ismounted /dev/pts; then
mkdir -m 0755 /dev/pts
mount -t devpts -o gid=5,mode=620,noexec,nosuid devpts /dev/pts >/dev/null
fi
if ! ismounted /dev/shm; then
mkdir -m 0755 /dev/shm
mount -t tmpfs -o mode=1777,noexec,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null
fi
if ! ismounted /run; then
mkdir -m 0755 /newrun
if ! str_starts "$(readlink -f /bin/sh)" "/run/"; then
mount -t tmpfs -o mode=0755,noexec,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
else
# the initramfs binaries are located in /run, so don't mount it with noexec
mount -t tmpfs -o mode=0755,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
fi
cp -a /run/* /newrun >/dev/null 2>&1
mount --move /newrun /run
rm -fr -- /newrun
fi
if command -v kmod >/dev/null 2>/dev/null; then
kmod static-nodes --format=tmpfiles 2>/dev/null | \
while read type file mode a a a majmin || [ -n "$type" ]; do
type=${type%\!}
case $type in
d)
mkdir -m $mode -p $file
;;
c)
mknod -m $mode $file $type ${majmin%:*} ${majmin#*:}
;;
esac
done
fi
trap "emergency_shell Signal caught!" 0
export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -gt 166 ]; then
# newer versions of udev use /run/udev/rules.d
export UDEVRULESD=/run/udev/rules.d
[ -d /run/udev ] || mkdir -p -m 0755 /run/udev
[ -d $UDEVRULESD ] || mkdir -p -m 0755 $UDEVRULESD
else
mkdir -m 0755 /dev/.udev /dev/.udev/rules.d
export UDEVRULESD=/dev/.udev/rules.d
fi
if [ "$RD_DEBUG" = "yes" ]; then
mkfifo /run/initramfs/loginit.pipe
loginit $DRACUT_QUIET /dev/console 2>&1 &
exec >/run/initramfs/loginit.pipe 2>&1
else
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
fi
[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION_ID" ] && info "$NAME-$VERSION_ID"
source_conf /etc/conf.d
if getarg "rd.cmdline=ask"; then
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -p "> " line || [ -n "$line" ]; do
[ "$line" = "." ] && break
echo "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
fi
if ! getargbool 1 'rd.hostonly'; then
[ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
remove_hostonly_files
[ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi
# run scriptlets to parse the command line
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
# pre-udev scripts run before udev starts, and are run only once.
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-udev' -d 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break before pre-udev"
source_hook pre-udev
UDEV_LOG=err
getargbool 0 rd.udev.info -d -y rdudevinfo && UDEV_LOG=info
getargbool 0 rd.udev.debug -d -y rdudevdebug && UDEV_LOG=debug
# start up udev and trigger cold plugs
UDEV_LOG=$UDEV_LOG $systemdutildir/systemd-udevd --daemon --resolve-names=never
UDEV_QUEUE_EMPTY="udevadm settle --timeout=0"
if [ $UDEVVERSION -lt 140 ]; then
UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
fi
udevproperty "hookdir=$hookdir"
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger"
source_hook pre-trigger
udevadm control --reload >/dev/null 2>&1 || :
# then the rest
udevadm trigger --type=subsystems --action=add >/dev/null 2>&1
udevadm trigger --type=devices --action=add >/dev/null 2>&1
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevsettle
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- $hookdir/initqueue/work
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
done
fi
main_loop=$(($main_loop+1))
[ $main_loop -gt $RDRETRY ] \
&& { flock -s 9 ; emergency_shell "Could not boot."; } 9>/.console_lock
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
# pre-mount happens before we try to mount the root filesystem,
# and happens once.
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
_i_mount=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
_i_mount=$(($_i_mount+1))
[ $_i_mount -gt 20 ] \
&& { flock -s 9 ; emergency_shell "Can't mount root filesystem"; } 9>/.console_lock
done
{
printf "Mounted root filesystem "
while read dev mp rest || [ -n "$dev" ]; do [ "$mp" = "$NEWROOT" ] && echo $dev; done < /proc/mounts
} | vinfo
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
make_trace_mem "hook cleanup" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' -d 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
# By the time we get here, the root filesystem should be mounted.
# Try to find init.
for i in "$(getarg real_init=)" "$(getarg init=)" $(getargs rd.distroinit=) /sbin/init; do
[ -n "$i" ] || continue
__p=$(readlink -f "${NEWROOT}/${i}")
if [ -x "$__p" -o -x "${NEWROOT}/${__p}" ]; then
INIT="$i"
break
fi
done
[ "$INIT" ] || {
echo "Cannot find init!"
echo "Please check to make sure you passed a valid root filesystem!"
emergency_shell
}
if [ $UDEVVERSION -lt 168 ]; then
# stop udev queue before killing it
udevadm control --stop-exec-queue
HARD=""
while pidof udevd >/dev/null 2>&1; do
for pid in $(pidof udevd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
else
udevadm control --exit
udevadm info --cleanup-db
fi
debug_off # Turn off debugging for this section
# unexport some vars
export_n root rflags fstype netroot NEWROOT
export RD_TIMESTAMP
# Clean up the environment
for i in $(export -p); do
i=${i#declare -x}
i=${i#export}
strstr "$i" "=" || continue
i=${i%%=*}
[ -z "$i" ] && continue
case $i in
root|PATH|HOME|TERM|PS4|RD_*)
:;;
*)
unset "$i";;
esac
done
. /tmp/export.orig 2>/dev/null || :
rm -f -- /tmp/export.orig
initargs=""
read CLINE /dev/null ; then
ignoreargs="console BOOT_IMAGE"
# only pass arguments after init= to the init
CLINE=${CLINE#*init=}
set -- $CLINE
shift # clear out the rest of the "init=" arg
for x in "$@"; do
for s in $ignoreargs; do
[ "${x%%=*}" = $s ] && continue 2
done
initargs="$initargs $x"
done
unset CLINE
else
debug_off # Turn off debugging for this section
set -- $CLINE
for x in "$@"; do
case "$x" in
[0-9]|s|S|single|emergency|auto ) \
initargs="$initargs $x"
;;
esac
done
fi
debug_on
if ! [ -d "$NEWROOT"/run ]; then
NEWRUN=/dev/.initramfs
mkdir -m 0755 "$NEWRUN"
mount --rbind /run/initramfs "$NEWRUN"
fi
wait_for_loginit
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
bv=$(getarg rd.break -d rdbreak) && [ -z "$bv" ] &&
emergency_shell -n switch_root "Break before switch_root"
unset bv
info "Switching root"
unset PS4
CAPSH=$(command -v capsh)
SWITCH_ROOT=$(command -v switch_root)
PATH=$OLDPATH
export PATH
if [ -f /etc/capsdrop ]; then
. /etc/capsdrop
info "Calling $INIT with capabilities $CAPS_INIT_DROP dropped."
unset RD_DEBUG
exec $CAPSH --drop="$CAPS_INIT_DROP" -- \
-c "exec switch_root \"$NEWROOT\" \"$INIT\" $initargs" || \
{
warn "Command:"
warn capsh --drop=$CAPS_INIT_DROP -- -c exec switch_root "$NEWROOT" "$INIT" $initargs
warn "failed."
emergency_shell
}
else
unset RD_DEBUG
exec $SWITCH_ROOT "$NEWROOT" "$INIT" $initargs || {
warn "Something went very badly wrong in the initramfs. Please "
warn "file a bug against dracut."
emergency_shell
}
fi
modules.d/99base/rdsosreport.sh 0000755 00000002502 15252504523 0012461 0 ustar 00 #!/bin/sh
echo 'Generating "/run/initramfs/rdsosreport.txt"'
[ -d /run/initramfs ] || mkdir -p /run/initramfs
exec >/run/initramfs/rdsosreport.txt 2>&1
PWFILTER='s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g'
set -x
cat /lib/dracut/dracut-*
cat /proc/cmdline | sed -e "$PWFILTER"
[ -f /etc/cmdline ] && cat /etc/cmdline | sed -e "$PWFILTER"
for _i in /etc/cmdline.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i | sed -e "$PWFILTER"
done
cat /proc/self/mountinfo
cat /proc/mounts
blkid
blkid -o udev
ls -l /dev/disk/by*
for _i in /etc/conf.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i | sed -e "$PWFILTER"
done
if command -v lvm >/dev/null 2>/dev/null; then
lvm pvdisplay
lvm vgdisplay
lvm lvdisplay
fi
command -v dmsetup >/dev/null 2>/dev/null && dmsetup ls --tree
cat /proc/mdstat
command -v ip >/dev/null 2>/dev/null && ip addr
if command -v journalctl >/dev/null 2>/dev/null; then
journalctl -ab --no-pager -o short-monotonic | sed -e "$PWFILTER"
else
dmesg | sed -e "$PWFILTER"
[ -f /run/initramfs/init.log ] && cat /run/initramfs/init.log | sed -e "$PWFILTER"
fi
modules.d/99base/initqueue.sh 0000755 00000002243 15252504523 0012105 0 ustar 00 #!/bin/sh
#
# Licensed under the GPLv2+
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
while [ $# -gt 0 ]; do
case "$1" in
--onetime)
onetime="yes";;
--online)
qname="/online";;
--settled)
qname="/settled";;
--finished)
qname="/finished";;
--timeout)
qname="/timeout";;
--unique)
unique="yes";;
--name)
name="$2";shift;;
--env)
env="$2"; shift;;
*)
break;;
esac
shift
done
if [ -z "$unique" ]; then
job="${name}$$"
else
job="${name:-$1}"
job=${job##*/}
fi
exe=$1
shift
[ -x "$exe" ] || exe=$(command -v $exe)
if [ -z "$exe" ] ; then
echo "Invalid command"
exit 1
fi
{
[ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"'
[ -n "$env" ] && echo "$env"
printf '%q ' "$exe" "$@"
printf '\n'
} > "/tmp/$$-${job}.sh"
mv -f "/tmp/$$-${job}.sh" "$hookdir/initqueue${qname}/${job}.sh"
[ -z "$qname" ] && >> $hookdir/initqueue/work
exit 0
modules.d/99base/dracut-lib.sh 0000755 00000102111 15252504523 0012116 0 ustar 00 #!/bin/sh
export DRACUT_SYSTEMD
export NEWROOT
if [ -n "$NEWROOT" ]; then
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
fi
if ! [ -d /run/initramfs ]; then
mkdir -p -m 0755 /run/initramfs/log
ln -sfn /run/initramfs/log /var/log
fi
[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log
debug_off() {
set +x
}
debug_on() {
[ "$RD_DEBUG" = "yes" ] && set -x
}
# returns OK if $1 contains literal string $2 (and isn't empty)
strstr() {
[ "${1##*"$2"*}" != "$1" ]
}
# returns OK if $1 matches (completely) glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglob() {
[ -n "$1" -a -z "${1##$2}" ]
}
# returns OK if $1 contains (anywhere) a match of glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglobin() {
[ -n "$1" -a -z "${1##*$2*}" ]
}
# returns OK if $1 contains literal string $2 at the beginning, and isn't empty
str_starts() {
[ "${1#"$2"*}" != "$1" ]
}
# returns OK if $1 contains literal string $2 at the end, and isn't empty
str_ends() {
[ "${1%*"$2"}" != "$1" ]
}
trim() {
local var="$*"
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
printf "%s" "$var"
}
if [ -z "$DRACUT_SYSTEMD" ]; then
warn() {
check_quiet
echo "<28>dracut Warning: $*" > /dev/kmsg
echo "dracut Warning: $*" >&2
}
info() {
check_quiet
echo "<30>dracut: $*" > /dev/kmsg
[ "$DRACUT_QUIET" != "yes" ] && \
echo "dracut: $*" >&2
}
else
warn() {
echo "Warning: $*" >&2
}
info() {
echo "$*"
}
fi
vwarn() {
while read line || [ -n "$line" ]; do
warn $line;
done
}
vinfo() {
while read line || [ -n "$line" ]; do
info $line;
done
}
# replaces all occurrences of 'search' in 'str' with 'replacement'
#
# str_replace str search replacement
#
# example:
# str_replace ' one two three ' ' ' '_'
str_replace() {
local in="$1"; local s="$2"; local r="$3"
local out=''
while strstr "${in}" "$s"; do
chop="${in%%"$s"*}"
out="${out}${chop}$r"
in="${in#*"$s"}"
done
echo "${out}${in}"
}
killall_proc_mountpoint() {
local _pid
local _t
local _killed=0
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
if strstr "$(ls -l -- "/proc/$_pid" "/proc/$_pid/fd" 2>/dev/null)" "$1" ; then
kill -9 "$_pid"
_killed=1
fi
done
return $_killed
}
getcmdline() {
local _line
local _i
local CMDLINE_ETC_D
local CMDLINE_ETC
local CMDLINE_PROC
unset _line
if [ -e /etc/cmdline ]; then
while read -r _line || [ -n "$_line" ]; do
CMDLINE_ETC="$CMDLINE_ETC $_line";
done ", we want the exact match
if [ "$_o" = "$1" ]; then
_val="1";
unset _doecho
fi
continue
fi
if [ "${_o#*=}" = "$_o" ]; then
# if cmdline argument has no "=", we assume "=1"
_val="1";
unset _doecho
continue
fi
_val="${_o#*=}"
_doecho=1
fi
done
if [ -n "$_val" ]; then
[ "x$_doecho" != "x" ] && echo "$_val";
return 0;
fi
return 1;
}
getarg() {
debug_off
local _deprecated _newoption
while [ $# -gt 0 ]; do
case $1 in
-d) _deprecated=1; shift;;
-y) if _dogetarg $2 >/dev/null; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption' instead." || warn "Option '$2' is deprecated."
fi
echo 1
debug_on
return 0
fi
_deprecated=0
shift 2;;
-n) if _dogetarg $2 >/dev/null; then
echo 0;
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption=0' instead." || warn "Option '$2' is deprecated."
fi
debug_on
return 1
fi
_deprecated=0
shift 2;;
*) if [ -z "$_newoption" ]; then
_newoption="$1"
fi
if _dogetarg $1; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$1' is deprecated, use '$_newoption' instead." || warn "Option '$1' is deprecated."
fi
debug_on
return 0;
fi
_deprecated=0
shift;;
esac
done
debug_on
return 1
}
# getargbool
# False if "getarg " returns "0", "no", or "off".
# True if getarg returns any other non-empty string.
# If not found, assumes - usually 0 for false, 1 for true.
# example: getargbool 0 rd.info
# true: rd.info, rd.info=1, rd.info=xxx
# false: rd.info=0, rd.info=off, rd.info not present (default val is 0)
getargbool() {
local _b
unset _b
local _default
_default="$1"; shift
_b=$(getarg "$@")
[ $? -ne 0 -a -z "$_b" ] && _b="$_default"
if [ -n "$_b" ]; then
[ $_b = "0" ] && return 1
[ $_b = "no" ] && return 1
[ $_b = "off" ] && return 1
fi
return 0
}
isdigit() {
case "$1" in
*[!0-9]*|"") return 1;;
esac
return 0
}
# getargnum
# Will echo the arg if it's in range [minval - maxval].
# If it's not set or it's not valid, will set it .
# Note all values are required to be >= 0 here.
# should be with [minval -maxval].
getargnum() {
local _b
unset _b
local _default _min _max
_default="$1"; shift
_min="$1"; shift
_max="$1"; shift
_b=$(getarg "$1")
[ $? -ne 0 -a -z "$_b" ] && _b=$_default
if [ -n "$_b" ]; then
isdigit "$_b" && _b=$(($_b)) && \
[ $_b -ge $_min ] && [ $_b -le $_max ] && echo $_b && return
fi
echo $_default
}
_dogetargs() {
debug_off
local _o _found _key
unset _o
unset _found
CMDLINE=$(getcmdline)
_key="$1"
set --
for _o in $CMDLINE; do
if [ "$_o" = "$_key" ]; then
_found=1;
elif [ "${_o%%=*}" = "${_key%=}" ]; then
[ -n "${_o%%=*}" ] && set -- "$@" "${_o#*=}";
_found=1;
fi
done
if [ -n "$_found" ]; then
[ $# -gt 0 ] && printf '%s' "$*"
return 0
fi
return 1;
}
getargs() {
debug_off
local _val _i _args _gfound _deprecated
unset _val
unset _gfound
_newoption="$1"
_args="$@"
set --
for _i in $_args; do
if [ "$_i" = "-d" ]; then
_deprecated=1
continue
fi
_val="$(_dogetargs $_i)"
if [ $? -eq 0 ]; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Option '$_i' is deprecated, use '$_newoption' instead." || warn "Option $_i is deprecated!"
fi
_gfound=1
fi
[ -n "$_val" ] && set -- "$@" "$_val"
_deprecated=0
done
if [ -n "$_gfound" ]; then
if [ $# -gt 0 ]; then
printf '%s' "$*"
fi
debug_on
return 0
fi
debug_on
return 1;
}
# Prints value of given option. If option is a flag and it's present,
# it just returns 0. Otherwise 1 is returned.
# $1 = options separated by commas
# $2 = option we are interested in
#
# Example:
# $1 = cipher=aes-cbc-essiv:sha256,hash=sha256,verify
# $2 = hash
# Output:
# sha256
getoptcomma() {
local line=",$1,"; local opt="$2"; local tmp
case "${line}" in
*,${opt}=*,*)
tmp="${line#*,${opt}=}"
echo "${tmp%%,*}"
return 0
;;
*,${opt},*) return 0;;
esac
return 1
}
# Splits given string 'str' with separator 'sep' into variables 'var1', 'var2',
# 'varN'. If number of fields is less than number of variables, remaining are
# not set. If number of fields is greater than number of variables, the last
# variable takes remaining fields. In short - it acts similary to 'read'.
#
# splitsep sep str var1 var2 varN
#
# example:
# splitsep ':' 'foo:bar:baz' v1 v2
# in result:
# v1='foo', v2='bar:baz'
#
# TODO: ':' inside fields.
splitsep() {
debug_off
local sep="$1"; local str="$2"; shift 2
local tmp
while [ -n "$str" -a "$#" -gt 1 ]; do
tmp="${str%%$sep*}"
local -n _splitsep_ref="$1"
_splitsep_ref="$tmp"
unset -n _splitsep_ref
str="${str#"$tmp"}"
str="${str#$sep}"
shift
done
if [ -n "$str" -a -n "$1" ]; then
local -n _splitsep_ref="$1"
_splitsep_ref="$str"
unset -n _splitsep_ref
fi
debug_on
return 0
}
setdebug() {
[ -f /usr/lib/initrd-release ] || return
if [ -z "$RD_DEBUG" ]; then
if [ -e /proc/cmdline ]; then
RD_DEBUG=no
if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
RD_DEBUG=yes
[ -n "$BASH" ] && \
export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
fi
fi
export RD_DEBUG
fi
debug_on
}
setdebug
source_all() {
local f
local _dir
_dir=$1; shift
[ "$_dir" ] && [ -d "/$_dir" ] || return
for f in "/$_dir"/*.sh; do [ -e "$f" ] && . "$f" "$@"; done
}
hookdir=/lib/dracut/hooks
export hookdir
source_hook() {
local _dir
_dir=$1; shift
source_all "/lib/dracut/hooks/$_dir" "$@"
}
check_finished() {
local f
for f in $hookdir/initqueue/finished/*.sh; do
[ "$f" = "$hookdir/initqueue/finished/*.sh" ] && return 0
{ [ -e "$f" ] && ( . "$f" ) ; } || return 1
done
return 0
}
source_conf() {
local f
[ "$1" ] && [ -d "/$1" ] || return
for f in "/$1"/*.conf; do [ -e "$f" ] && . "$f"; done
}
die() {
{
echo "<24>dracut: FATAL: $*";
echo "<24>dracut: Refusing to continue";
} > /dev/kmsg
{
printf 'warn dracut: FATAL: %q\n' "$*"
echo "warn dracut: Refusing to continue"
} >> $hookdir/emergency/01-die.sh
[ -d /run/initramfs ] || mkdir -p -- /run/initramfs
> /run/initramfs/.die
if getargbool 0 "rd.shell"; then
emergency_shell
else
source_hook "shutdown-emergency"
fi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl --no-block --force halt
fi
exit 1
}
check_quiet() {
if [ -z "$DRACUT_QUIET" ]; then
DRACUT_QUIET="yes"
getargbool 0 rd.info -d -y rdinfo && DRACUT_QUIET="no"
getargbool 0 rd.debug -d -y rdinitdebug && DRACUT_QUIET="no"
getarg quiet || DRACUT_QUIET="yes"
a=$(getarg loglevel=)
[ -n "$a" ] && [ $a -ge 28 ] && DRACUT_QUIET="yes"
export DRACUT_QUIET
fi
}
check_occurances() {
# Count the number of times the character $ch occurs in $str
# Return 0 if the count matches the expected number, 1 otherwise
local str="$1"
local ch="$2"
local expected="$3"
local count=0
while [ "${str#*$ch}" != "${str}" ]; do
str="${str#*$ch}"
count=$(( $count + 1 ))
done
[ $count -eq $expected ]
}
incol2() {
debug_off
local dummy check;
local file="$1";
local str="$2";
[ -z "$file" ] && return 1;
[ -z "$str" ] && return 1;
while read dummy check restofline || [ -n "$check" ]; do
if [ "$check" = "$str" ]; then
debug_on
return 0
fi
done < $file
debug_on
return 1
}
udevsettle() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=$hookdir/initqueue/work $settle_exit_if_exists
else
udevadm settle --timeout=30
fi
}
udevproperty() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -ge 143 ]; then
for i in "$@"; do udevadm control --property=$i; done
else
for i in "$@"; do udevadm control --env=$i; done
fi
}
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc || [ -n "$dev" ]; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted
# usage: ismounted /dev/
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a || [ -n "$m" ]; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# root=nfs:[:][:]
# root=nfs4:[:][:]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# Create udev rule match for a device with its device name, or the udev property
# ID_FS_UUID or ID_FS_LABEL
#
# example:
# udevmatch LABEL=boot
# prints:
# ENV{ID_FS_LABEL}="boot"
#
# TODO: symlinks
udevmatch() {
case "$1" in
UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????)
printf 'ENV{ID_FS_%s}=="%s"' "${1%%=*}" "${1#*=}"
;;
UUID=*)
printf 'ENV{ID_FS_UUID}=="%s*"' "${1#*=}"
;;
PARTUUID=*)
printf 'ENV{ID_FS_PARTUUID}=="%s*"' "${1#*=}"
;;
/dev/?*) printf -- 'KERNEL=="%s"' "${1#/dev/}" ;;
*) return 255 ;;
esac
}
# Prints unique path for potential file inside specified directory. It consists
# of specified directory, prefix and number at the end which is incremented
# until non-existing file is found.
#
# funiq dir prefix
#
# example:
# # ls /mnt
# cdrom0 cdrom1
#
# # funiq /mnt cdrom
# /mnt/cdrom2
funiq() {
local dir="$1"; local prefix="$2"
local i=0
[ -d "${dir}" ] || return 1
while [ -e "${dir}/${prefix}$i" ]; do
i=$(($i+1)) || return 1
done
echo "${dir}/${prefix}$i"
}
# Creates unique directory and prints its path. It's using funiq to generate
# path.
#
# mkuniqdir subdir new_dir_name
mkuniqdir() {
local dir="$1"; local prefix="$2"
local retdir; local retdir_new
[ -d "${dir}" ] || mkdir -m 0755 -p "${dir}" || return 1
retdir=$(funiq "${dir}" "${prefix}") || return 1
until mkdir -m 0755 "${retdir}" 2>/dev/null; do
retdir_new=$(funiq "${dir}" "${prefix}") || return 1
[ "$retdir_new" = "$retdir" ] && return 1
retdir="$retdir_new"
done
echo "${retdir}"
}
# Copy the contents of SRC into DEST, merging the contents of existing
# directories (kinda like rsync, or cpio -p).
# Creates DEST if it doesn't exist. Overwrites files with the same names.
#
# copytree SRC DEST
copytree() {
local src="$1" dest="$2"
mkdir -p "$dest"; dest=$(readlink -e -q "$dest")
( cd "$src"; cp -af . -t "$dest" )
}
# Evaluates command for UUIDs either given as arguments for this function or all
# listed in /dev/disk/by-uuid. UUIDs doesn't have to be fully specified. If
# beginning is given it is expanded to all matching UUIDs. To pass full UUID to
# your command use '$___' as a place holder. Remember to escape '$'!
#
# foreach_uuid_until [ -p prefix ] command UUIDs
#
# prefix - string to put just before $___
# command - command to be evaluated
# UUIDs - list of UUIDs separated by space
#
# The function returns after *first successful evaluation* of the given command
# with status 0. If evaluation fails for every UUID function returns with
# status 1.
#
# Example:
# foreach_uuid_until "mount -U \$___ /mnt; echo OK; umount /mnt" \
# "01234 f512 a235567f-12a3-c123-a1b1-01234567abcb"
foreach_uuid_until() (
cd /dev/disk/by-uuid
[ "$1" = -p ] && local prefix="$2" && shift 2
local cmd="$1"; shift; local uuids_list="$*"
local uuid; local full_uuid; local ___
[ -n "${cmd}" ] || return 1
for uuid in ${uuids_list:-*}; do
for full_uuid in ${uuid}*; do
[ -e "${full_uuid}" ] || continue
___="${prefix}${full_uuid}"
eval ${cmd} && return 0
done
done
return 1
)
# Get kernel name for given device. Device may be the name too (then the same
# is returned), a symlink (full path), UUID (prefixed with "UUID=") or label
# (prefixed with "LABEL="). If just a beginning of the UUID is specified or
# even an empty, function prints all device names which UUIDs match - every in
# single line.
#
# NOTICE: The name starts with "/dev/".
#
# Example:
# devnames UUID=123
# May print:
# /dev/dm-1
# /dev/sdb1
# /dev/sdf3
devnames() {
local dev="$1"; local d; local names
case "$dev" in
UUID=*)
dev="$(foreach_uuid_until '! blkid -U $___' "${dev#UUID=}")" \
&& return 255
[ -z "$dev" ] && return 255
;;
LABEL=*) dev="$(blkid -L "${dev#LABEL=}")" || return 255 ;;
/dev/?*) ;;
*) return 255 ;;
esac
for d in $dev; do
names="$names
$(readlink -e -q "$d")" || return 255
done
echo "${names#
}"
}
usable_root() {
local _i
[ -d "$1" ] || return 1
for _i in "$1"/usr/lib*/ld-*.so "$1"/lib*/ld-*.so; do
[ -e "$_i" ] && return 0
done
for _i in proc sys dev; do
[ -e "$1"/$_i ] || return 1
done
return 0
}
inst_hook() {
local _hookname _unique _name _job _exe
while [ $# -gt 0 ]; do
case "$1" in
--hook)
_hookname="/$2";shift;;
--unique)
_unique="yes";;
--name)
_name="$2";shift;;
*)
break;;
esac
shift
done
if [ -z "$_unique" ]; then
_job="${_name}$$"
else
_job="${_name:-$1}"
_job=${_job##*/}
fi
_exe=$1
shift
[ -x "$_exe" ] || _exe=$(command -v $_exe)
if [ -n "$onetime" ]; then
{
echo '[ -e "$_job" ] && rm -f -- "$_job"'
echo "$_exe $@"
} > "/tmp/$$-${_job}.sh"
else
echo "$_exe $@" > "/tmp/$$-${_job}.sh"
fi
mv -f "/tmp/$$-${_job}.sh" "$hookdir/${_hookname}/${_job}.sh"
}
# inst_mount_hook